Headers & Connectors

SKU: SF-PRT-10651 | Brand: SparkFun

These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which...

SKU: AF-4926 | Brand: Adafruit

A slim, reliable 1.25mm pitch cable with 6-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JS...

SKU: PL-2706 | Brand: Pololu

This single-row, 6-pin right-angle female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. The right-angle orientation routes connections parallel to the board surface, making it id...

SKU: SF-PRT-13010 | Brand: SparkFun

This is a simple 2x3 female PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other. Documents: Datasheet

SKU: SF-PRT-12590 | Brand: SparkFun

This is a SMD 6 pin right angle female header. We realized that we have had the male version of this header available for awhile now, but never the female. Now you have the ability to get both! Pins have 0.1" spacin...

SKU: EC-CCH01065C | Brand: Elecrow

A 1×6 female stackable header with extra-long pins, designed for stacking Arduino shields. The extended legs pass through one shield's PCB and connect into the board below, allowing multiple shields to be stacked on t...

SKU: SF-PRT-09429 | Brand: SparkFun

This is a through-hole 6-pin right-angle female header. This header connects perfectly with the 6-pin male header on Arduino Pros and LilyPad Main Boards. Pins are spaced by 0.1".Documents:Datasheet

SKU: AF-2105 | Brand: Adafruit

This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with our 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a male header. The socket stra...

SKU: DF-FIT0106 | Brand: DFRobot

A pack of ten 6-pin female headers with standard 0.1″ (2.54mm) pin spacing. Commonly used for Arduino shield connections and general prototyping. Key Features Standard 0.1″ Pitch – Compatible with breadboards, Ardu...

SKU: SF-PRT-11894 | Brand: SparkFun

A standard 6-pin female header with 0.1″ (2.54 mm) pitch, designed for through-hole mounting. Connects with most 6-pin male headers and is commonly used for FTDI, ICSP, and serial programming connections. Specificati...

SKU: SF-PRT-11544 | Brand: SparkFun

These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won’t work. The surface mount side of the legs are staggered for stress relief. This is a 6-Pin fema...

SKU: SF-PRT-12753 | Brand: SparkFun

A 6-pin analog (RH) British Telecom connector in the BTA female format, commonly used for Vernier analog sensor interfaces. Similar to RJ11 connectors but with a side-mounted lock instead of a bottom hook, the BTA is ...

SKU: SF-PRT-12754 | Brand: SparkFun

A 6-pin British Telecom Digital (BTD) female connector, commonly used with Vernier digital sensors for science education. The BTD format is similar to RJ11 but uses a side-mounted lock instead of a bottom-mounted hook...

SKU: SF-PRT-10210 | Brand: SparkFun

Here is a six pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much ...

SKU: PL-1023 | Brand: Pololu

A 2×3-pin (6-pin) female header with standard 0.1" (2.54mm) spacing. This compact dual-row header is commonly used for ISP programming connections, small sensor breakouts, and custom cable assemblies. The 2×3 configu...

SKU: AF-4986 | Brand: Adafruit

A matching pair of 1.25 mm pitch cables with 6-pin connectors — one inline socket and one plug — that friction-lock together for a secure, reliable connection. Each cable is 10 cm long, making them well suited for tig...

SKU: PL-972 | Brand: Pololu

A 300mm (12″) 6-conductor ribbon cable with female 2×3 IDC connectors on each end. Designed to plug into standard 0.1″ (2.54mm) 2×3 shrouded box headers, and also compatible with 0.1″ male header pins. Key Features ...

SKU: PL-855 | Brand: Pololu

A 2×3-pin (6-pin) IDC socket with strain relief clip, designed for use with standard 2×3-pin shrouded male headers. Crimps onto flat ribbon cable for quick, solderless connections. Commonly used for AVR ISP programmin...

SKU: PL-4763 | Brand: Pololu

A 300mm (12″) cable with a female JST SH-style connector on one end and six unterminated colour-coded 28 AWG wires on the other. Designed for use with Pololu Micro Metal Gearmotor Encoders (both top-entry and side-ent...

SKU: AF-1665 | Brand: Adafruit

A matched pair of 6-wire cables with JST SM connectors — one plug and one receptacle. The latching connector provides a secure, compact connection that won't pull apart easily. Great for any project where you need a r...