Headers & Connectors

SKU: SF-PRT-10007 | Brand: SparkFun

A set of stackable headers designed for the Arduino Uno, Arduino Pro, and other boards using the classic (pre-R3) pin layout. These female headers sit tall enough to clear the USB-B connector, making them ideal for st...

SKU: SF-PRT-13925 | Brand: SparkFun

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield boa...

SKU: LB-LS1374 | Brand: Little Bird

WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series).These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as s...

SKU: PL-1902 | Brand: Pololu

These 1×3-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires or crimp pins to create reliable, removable...

SKU: LB-LS2788 | Brand: Little Bird

A 100-piece assortment of solder seal heat shrink butt connectors in four sizes. These connectors combine soldering, insulation, and waterproof sealing into a single step — just apply heat and the solder ring melts to...

SKU: PL-1901 | Brand: Pololu

These 1×2-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires or crimp pins to create reliable, removable...

SKU: SF-PRT-09140 | Brand: SparkFun

This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1"...

SKU: SF-PRT-17152 | Brand: SparkFun

These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated into a breadboard circuit or attach a shield on t...

SKU: PL-1017 | Brand: Pololu

This single-row, 7-pin straight female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. It provides a reliable socket connection for board-to-board and board-to-wire applications. ...

SKU: DF-FIT0084 | Brand: DFRobot

A pack of 10 black straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female header...

SKU: AF-4528 | Brand: Adafruit

A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and m...

SKU: LB-CTC-CAPS | Brand: Little Bird

These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers.  The Crack the Code shield uses these on the buzzer module.  These little j...

SKU: DF-FIT0110 | Brand: DFRobot

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel ...

SKU: AF-3002 | Brand: Adafruit

These two Short Male Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and tiny and are designed to match pe...

SKU: PL-1037 | Brand: Pololu

The 0.100″ (2.54 mm) 2×20-Pin Straight Female Header is a double-row, 40-pin socket strip designed to mate with standard 0.1″ pitch male headers. This is the standard GPIO header size used on Raspberry Pi and other si...

SKU: AF-5585 | Brand: Adafruit

These Socket Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!These headers are particularly cute and tiny with a body height of just 5.0 mm they are the...

SKU: AF-4874 | Brand: Adafruit

A matching pair of 4-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, relia...

SKU: PI-COM1101 | Brand: Pimoroni

These 40-pin 2x20 male headers can be used on a Pi Zero or a pHAT to break out the pins.You can choose either straight or at a 90° angle.Add one to a Pi Zero for compatibility with HATs (which use a female header).Can...

SKU: SF-PRT-11026 | Brand: SparkFun

If you need to knock up a quick prototype there’s nothing like having a pile of jumper wires to speed things up, and let’s face it: sometimes you want quantity over quality. These are the same jumper wires that com...

SKU: SF-PRT-12796 | Brand: SparkFun

These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header. Combine these with our male to male jumpers to create a male to f...