Enclosures & Hardware

SKU: AF-6241 | Brand: Adafruit

A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer ...

SKU: AF-6308 | Brand: Adafruit

Perfect for a variety of small projects, these adhesive squares provide a strong bond to most surfaces and are an excellent way to attach heat sinks to a chip.Each tab is 0.5" (12.7mm) square and 1.25mm thick. You get...

SKU: DF-FIT0968 | Brand: DFRobot

##Introduction This Expandable case is a high-quality expandable enclosure designed specifically for the LattePanda Sigma Single Board Computer Server. It offers convenient installation for various non-standard M.2 ex...

SKU: DF-FIT0969 | Brand: DFRobot

An aluminium M.2 2280 SSD heatsink with a heat pipe and passive fin design for high-performance thermal management. The 32 aluminium fins provide a total heat dissipation area of 4,500mm², delivering 10–30°C of coolin...

SKU: DF-FIT0949 | Brand: DFRobot

An all-metal aluminium alloy enclosure designed specifically for the LattePanda Sigma single board computer. Features a bright black anodised finish with sandblasting for a scratch-resistant, professional appearance. ...

SKU: DF-FIT0945 | Brand: DFRobot

##Introduction This meticulously crafted metal enclosure is specifically designed for the LattePanda 3 Delta Single Board Computer. The enclosure fully wraps around the entire LattePanda 3 Delta, including the mainboa...

SKU: DF-FIT0946 | Brand: DFRobot

A fanless aluminium alloy enclosure designed specifically for the LattePanda 3 Delta single board computer. The case acts as a passive heatsink, with the aluminium shell providing excellent thermal conductivity to kee...

SKU: SF-BOB-25069 | Brand: SparkFun

The Macchina OBD-II 3-Way Breakout Board simplifies OBD2 device development by splitting a single OBD2 port into three accessible connectors with flexible signal routing. Junction blocks let you reroute individual OBD...

SKU: WS-29417 | Brand: Waveshare

The Luckfox Pico WebBee is a compact Linux development board built around the Rockchip RV1103 chip, combining an ARM Cortex-A7 core clocked at 1.2GHz with a RISC-V MCU. It comes bundled with a custom ABS protective ca...

SKU: AF-6183 | Brand: Adafruit

Here is a cute, minimal snap-on mount for your QT Py to keep it safe during use and transport. It has been custom-designed and 3D printed to accommodate the USB-C connector, along with four M3 mounting holes. No screw...

SKU: AF-6126 | Brand: Adafruit

Here is a cute and minimal enclosure for your Adafruit bq25185 USB / DC / Solar Charger with 5V Boost Board to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate al...

SKU: AF-6124 | Brand: Adafruit

This custom-designed 3D-printed enclosure is made specifically for the Adafruit bq25185 USB/DC/Solar Charger with 3.3V Buck board. The snap-together design requires no screws or glue — simply press the two halves toge...

SKU: AF-6114 | Brand: Adafruit

A snap-on enclosure designed specifically for the Adafruit Universal USB / DC / Solar Lithium Ion/Polymer Charger (bq24074). This 3D-printed case protects the charger board while providing full access to all ports and...

SKU: AF-6054 | Brand: Adafruit

The Feather Mount for LEGO-Compatible Brick Systems lets you securely attach any standard-sized Feather or FeatherWing board (2" × 0.9" / 51 mm × 23 mm) to LEGO-compatible brick plates. No hot glue, epoxy, or tape nee...

SKU: SF-COM-25893 | Brand: SparkFun

This is a 5mm right angle light pipe to get the light of an LED out the end plate of an enclosure. We couldn't find a light pipe that fit all our needs, so we made it! This clip snaps over any SMD LED that is 1206 siz...

SKU: AF-6015 | Brand: Adafruit

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws...

SKU: AF-6002 | Brand: Adafruit

Here is a cute and minimal enclosure for your QT Py to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the USB-C connector. No screws or glue are required; simpl...

SKU: AF-5998 | Brand: Adafruit

Here is a cute and minimal enclosure for your Pixel Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button, 3-pin JST SH port, and the 4 ter...

SKU: AF-5981 | Brand: Adafruit

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws...

SKU: DF-FIT0938 | Brand: DFRobot

UNIHIKER cam be protect with the silicone protective case. Designed with precision molds, it fits snugly on your Unihiker single board computer, reducing the risk of accidental drops and screen damage. Choose fro...