Enclosures & Hardware

SKU: PH-TPH-045 | Brand: PiHut

This Raspberry Pi 4 Camera Case is our own design manufactured right here in our warehouse! Designed to hold and protect your Raspberry Pi 4 and official Raspberry Pi Camera Module, the Camera Case is great for ph...

SKU: AF-4340 | Brand: Adafruit

A premium anodised aluminium enclosure for the Raspberry Pi 4 with dual 5V DC brushless fans for maximum cooling performance. The solid aluminium construction provides excellent passive heat dissipation while the two ...

SKU: EF-EF10111 | Brand: ElecFreaks

A crystal-clear acrylic enclosure for the BBC micro:bit with an integrated 2×AA battery holder on the back. The two-piece case wraps the micro:bit while leaving the A and B buttons and edge connector gold fingers full...

SKU: SF-PRT-15008 | Brand: SparkFun

This is a basic baseplate for the Raspberry Pi 3 B/B+. It is translucent in color and provides a simple mounting solution for wherever you want to put your Pi!The baseplate is designed for the Raspberry Pi to securely...

SKU: PL-2440 | Brand: Pololu

A pack of four 2-pin screw terminal blocks with 5 mm pitch and side-entry wire orientation. Simply tighten or loosen the screws to connect or release wires — no soldering needed for the wire connection itself. Each b...

SKU: PL-1075 | Brand: Pololu

This M3, pan-head screw is 5 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: WS-24077 | Brand: Waveshare

Raspberry Pi Zero POD case for Raspberry Pi Zero / Zero 2 W Series boards, Works with other POD modules Raspberry Pi Zero POD Case High quality case designed for the Raspberry Pi Zero s...

SKU: PH-102035 | Brand: PiHut

Touch Screen Case for the Official Raspberry Pi LCD in BlackOur black case houses a 7 inch Raspberry Pi Touch Screen and an attached Raspberry Pi board (neither of which are included), to provide you with a prote...

SKU: PR-PIM132 | Brand: Little Bird

This little dingus connects our popular micro metal gearmotors to a standard LEGO® axle - ideal for making your brick creations move autonomously!Injection moulded from snazzy purple plastic they are made in the UK. S...

SKU: AF-3703 | Brand: Adafruit

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. Instead of chucking your Raspberry Pi or Metro M0...

SKU: AF-2942 | Brand: Adafruit

When your little robot needs someone to lean on, it can lean on this support wheel. Perfect for use with 2-wheeled robots that need a third-point of support, this Support Wheel comes attached to a mounting plate and w...

SKU: SF-PRT-10228 | Brand: SparkFun

A simple and versatile angle bracket with one threaded and one unthreaded 4-40 hole. Use it for connecting PCBs at 90° angles, mounting accelerometers, gyros, and other sensors, or attaching components to universal pl...

SKU: AF-4435 | Brand: Adafruit

This generic DIN rail holder lets you mount PCBs and small modules up to 50 × 80 mm onto standard 35 mm DIN rail. The snap-on design assembles in under a minute and locks securely in place with the included yellow pla...

SKU: PL-1964 | Brand: Pololu

This #4-40, pan-head screw is 1 1/4″ (1.25″) long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: PL-1952 | Brand: Pololu

Hexagonal male-female aluminium standoffs designed specifically for the Raspberry Pi. The 11mm spacing is the ideal height for mounting expansion boards with standard-size female headers, and the M2.5 threads fit the ...

SKU: PL-733 | Brand: Pololu

The Tamiya 70171 3mm Threaded Shaft Set includes two fully-threaded 3 × 150mm shafts with ball joints and connectors for building control rods with three-dimensional movement. The shafts can be cut to any desired leng...

SKU: DF-FIT0883-B | Brand: DFRobot

Note: The Housing is compatible with micro: Maqueen Lite            Not compatible with micro: Maqueen Plus.            If you need the micro: Maqueen Lit...

SKU: AF-4662 | Brand: Adafruit

These T-shaped barbed connectors allow you to split or combine silicone tubing runs into three-way junctions. Each port has an outer diameter of approximately 4 mm, designed to fit snugly with 3 mm ID silicone tubing ...

SKU: AF-4251 | Brand: Adafruit

If you bought a servo from us you probably got a bunch of plastic add-ons that you can snap onto the rotating part of the servo. These are called 'servo horns'. For many robotics projects you'll end up drilling or glu...

SKU: AF-2335 | Brand: Adafruit

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite ...