Enclosures & Hardware

SKU: SF-PRT-08097 | Brand: SparkFun

Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed. T...

SKU: SF-PRT-00121 | Brand: SparkFun

A small black anodised aluminium heatsink designed for TO-220 package components. Bolts directly onto voltage regulators, transistors, and other TO-220 devices to help dissipate heat and keep them running within safe ...

SKU: PL-1069 | Brand: Pololu

This M3 hex nut is made from steel, is zinc-plated, and comes in packs of 25.

SKU: SF-ROB-13207 | Brand: SparkFun

No, this isn’t a tank tread, this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at each end for efficient mounting. Sometimes called a “drag chain,” each carrier can be...

SKU: SF-PRT-10738 | Brand: SparkFun

These metal hex standoffs raise your development board or proto board off the work surface for protection and airflow. With a #4-40 thread, they fit most boards with standard mounting holes. Specifications Length: ...

SKU: SF-PRT-10739 | Brand: SparkFun

Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below. Note: These are sold as a...

SKU: AF-3305 | Brand: Adafruit

The Adafruit TFT 50-Pin to 40-Pin + AR1100 Touchscreen Adapter converts Adafruit RTD266X driver boards with 50-pin TFT connectors to work with 40-pin TFT displays. It also includes a built-in AR1100 resistive touch co...

SKU: SF-COM-10594 | Brand: SparkFun

Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or...

SKU: SF-PRT-10462 | Brand: SparkFun

Nylon standoffs for mounting PCBs in enclosures or elevating boards off work surfaces. These ¾" (19mm) long standoffs are tapped for 4-40 screws and sold in a pack of 10. Key Features Nylon Construction – Non-condu...

SKU: SF-PRT-10463 | Brand: SparkFun

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10

SKU: SF-PRT-10453 | Brand: SparkFun

There are your standard Philips-head 4-40 screws. They are ¼" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: SF-PRT-10450 | Brand: SparkFun

Standard Philips-head 4-40 screws. They are 1" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: SF-TOL-12783 | Brand: SparkFun

A 1ft (30cm) flexible coolant pipe with articulating segments that hold their position when bent. Originally designed for directing coolant or washing fluid on machine tools, these pipes are also popular with makers a...

SKU: SF-PRT-10114 | Brand: SparkFun

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snug...

SKU: DF-FIT0475 | Brand: DFRobot

This plywood case is a solid enclosure for your LattePanda Windows 10 SBC. The case protects the board from ESD damage while letting you see status LEDs and providing access to USB, HDMI, SD card, GPIO and anten...

SKU: AF-761 | Brand: Adafruit

We have some great waterproof and weather-proof items in the adafruit shop, but once you have a project built, you'll want to enclose it. But how to keep an enclosure weather/waterproof while still attaching cab...

SKU: AF-2013 | Brand: Adafruit

Add knobs to your grid with this add-on accessory for the HELLA UNTZtrument. This is a replacement piece of laser cut acrylic to use when building an Adafruit HELLA UNTZtrument It's perfect for adding a rotary enco...

SKU: DF-FIT0060 | Brand: DFRobot

A 10-pack of M3 × 5mm mounting screws with matching nuts. A staple for securing circuit boards, sensors, and mechanical components in electronics projects. Key Features M3 Thread – Standard M3 size compatible with ...

SKU: DF-FIT0061 | Brand: DFRobot

A 10-pack of M3 × 8mm mounting screws with matching nuts. A staple for securing circuit boards, sensors, and mechanical components in electronics projects. Key Features M3 Thread – Standard M3 size compatible with ...

SKU: DF-FIT0063 | Brand: DFRobot

A 10-pack of M3 × 10mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent spacing and secure mechanical support. Standoffs are ideal for...