Enclosures & Hardware

SKU: DF-FIT0194 | Brand: DFRobot

A 10-pack of M3 × 30mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking ...

SKU: SF-PRT-11796 | Brand: SparkFun

These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. ...

SKU: PL-1985 | Brand: Pololu

Keep your components separated with this 25-pack of 12mm-long (0.47") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with...

SKU: DF-FIT0064 | Brand: DFRobot

A 10-pack of M3 × 50mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent 50mm spacing and secure mechanical support. At 50mm height, th...

SKU: SF-KIT-22197 | Brand: SparkFun

This GNSS Antenna Mounting Hardware Kit gives all of the basic parts you'll need to mount your antenna to a structure or support. We love to use this kit to secure one of our two GNSS Multi-Band Antennas (either the S...

SKU: AF-5050 | Brand: Adafruit

Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin...

SKU: SF-ROB-12350 | Brand: SparkFun

These plastic shaft spacers have an inner diameter of 1/4” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

SKU: SF-ROB-12215 | Brand: SparkFun

This 10-inch aluminium tube is a versatile structural component for robotics, mechanical builds, and custom enclosures. With a hollow centre, wires and cables can easily be routed through the tube for clean, protected...

SKU: SF-ROB-12193 | Brand: SparkFun

These plastic shaft spacers have an inner diameter of 1” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

SKU: SF-PRT-10738 | Brand: SparkFun

These metal hex standoffs raise your development board or proto board off the work surface for protection and airflow. With a #4-40 thread, they fit most boards with standard mounting holes. Specifications Length: ...

SKU: SF-PRT-10739 | Brand: SparkFun

Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below. Note: These are sold as a...

SKU: SF-PRT-10462 | Brand: SparkFun

Nylon standoffs for mounting PCBs in enclosures or elevating boards off work surfaces. These ¾" (19mm) long standoffs are tapped for 4-40 screws and sold in a pack of 10. Key Features Nylon Construction – Non-condu...

SKU: SF-PRT-10463 | Brand: SparkFun

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10

SKU: DF-FIT0063 | Brand: DFRobot

A 10-pack of M3 × 10mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent spacing and secure mechanical support. Standoffs are ideal for...

SKU: SF-PRT-29327 | Brand: SparkFun

Build a neater, sturdier Raspberry Pi stack with this hardware kit for mounting a standard Pi HAT. It is designed for Raspberry Pi 3, 4 and 5 boards, including builds where a larger cooling fan or heat sink needs extr...

SKU: SF-PRT-26986 | Brand: SparkFun

This round steel SMT spacer provides an internal M2.5 thread for creating a compact threaded mounting point directly on a PCB or assembly.It is reflow compatible, so it can be placed during surface-mount assembly and ...

SKU: SF-PRT-25464 | Brand: SparkFun

This threaded hex standoff is a simple hardware spacer for mounting circuit boards, panels and small electronics assemblies.It is 0.750 in (19.05 mm) long between boards and tapped for a #4-40 screw, making it useful ...

SKU: SF-PRT-28007 | Brand: SparkFun

Add a bit of protection and a cleaner finish to your Alchitry board with this standoff hardware. It is designed for use with compatible Alchitry boards, helping lift the PCB off your work surface or enclosure base.The...

SKU: SF-PRT-28005 | Brand: SparkFun

This spacer board gives your FPGA stack a little extra breathing room. It adds 5.6mm of space between stacked boards, helping make room for the included heatsink.It is also handy when you need clearance for cables bet...

SKU: SF-PRT-28765 | Brand: SparkFun

This aluminium hex standoff is a compact threaded spacer for stacking and mounting small boards. It is 16.0mm long, measures 4.5mm across the flats, and is tapped through for an M2.5-0.45 screw.It is well suited to mo...