Enclosures & Hardware

SKU: DF-FIT0620 | Brand: DFRobot

A 12V DC electric solenoid lock with a steel case and steel casting parts. Apply power to retract the latch and unlock; remove power and the latch springs back to the locked position. The lock includes signal feedback...

SKU: AF-1178 | Brand: Adafruit

Rollin' rollin' rollin', you can now roll around smooth as silk with these radial bearings. Often referred to as "skate bearings" They're good for supporting a rotating rod or as a wheel hub. However, these are higher...

SKU: DF-FIT0274 | Brand: DFRobot

A 10-pack of M3 × 20mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: DF-FIT0270 | Brand: DFRobot

A 10-pack of M3 × 10mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: DF-FIT0269 | Brand: DFRobot

A 10-pack of M3 × 30mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: DF-FIT1014 | Brand: DFRobot

The official Raspberry Pi IO Case is a two-piece sheet metal enclosure for the Compute Module 5 and CM5 IO Board. It provides space for accessories such as an M.2 SSD or PoE+ HAT+, includes slots for CSI-2 cameras and...

SKU: AF-1297 | Brand: Adafruit

You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one here! This mount will fit any NEMA-17 motor (with 31mm hole...

SKU: DF-FIT0280 | Brand: DFRobot

A 10-pack of M3 × 12mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: AF-16 | Brand: Adafruit

A blank metal tin in the classic Altoids gum size — perfect for housing small electronics projects. Custom-made with a flattened bottom (instead of rounded) so components sit flush inside. Ideal for building portable ...

SKU: DF-FIT0294 | Brand: DFRobot

A 10-pack of M3 × 6mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cle...

SKU: DF-FIT0273 | Brand: DFRobot

A 10-pack of M3 × 16mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: SF-PRT-10454 | Brand: SparkFun

Standard 4-40 zinc-plated hex nuts. A common thread size used in electronics enclosures, PCB mounting, and small hardware assemblies. Specifications Thread Size – 4-40 (UNC) Material – Zinc-plated steel Quantity ...

SKU: DF-FIT0807 | Brand: DFRobot

PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail in...

SKU: DF-FIT0561 | Brand: DFRobot

An all-metal adjustable screen holder that lets you tilt displays on your desktop at your preferred viewing angle. The rotating screws provide stable elastic reinforcement, and the holder folds flat when not in use. R...

SKU: AF-4103 | Brand: Adafruit

A simple, solder-free way to make secure wire connections to development boards with large alligator-clip pads. Thread a screw through the pad, wrap your wire around it, and tighten the hex nut to hold everything firm...

SKU: AF-1679 | Brand: Adafruit

A compact bent-wire stand designed for tablets up to 7 inches and small TFT displays. The rubberised grip holds devices securely at an adjustable viewing angle, and the stand collapses flat for easy storage or travel....

SKU: AF-2176 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a narrow bevel finish. Slot the LED through the opening, insert the plastic retaining cap, and tighten the threaded washer for a clea...

SKU: AF-2178 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a wide concave bevel finish. The concave bezel creates a recessed look around the LED, adding a polished, professional touch to panel...

SKU: AF-2177 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a wide convex bevel finish. The raised convex bezel adds a bold, dome-shaped profile around the LED, giving panels and enclosures a d...

SKU: SF-PRT-08995 | Brand: SparkFun

Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below. Sold in single units.