Enclosures & Hardware

SKU: SF-PRT-10454 | Brand: SparkFun

Standard 4-40 zinc-plated hex nuts. A common thread size used in electronics enclosures, PCB mounting, and small hardware assemblies. Specifications Thread Size – 4-40 (UNC) Material – Zinc-plated steel Quantity ...

SKU: DF-FIT0807 | Brand: DFRobot

PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail in...

SKU: DF-FIT0561 | Brand: DFRobot

An all-metal adjustable screen holder that lets you tilt displays on your desktop at your preferred viewing angle. The rotating screws provide stable elastic reinforcement, and the holder folds flat when not in use. R...

SKU: AF-4103 | Brand: Adafruit

A simple, solder-free way to make secure wire connections to development boards with large alligator-clip pads. Thread a screw through the pad, wrap your wire around it, and tighten the hex nut to hold everything firm...

SKU: AF-1679 | Brand: Adafruit

A compact bent-wire stand designed for tablets up to 7 inches and small TFT displays. The rubberised grip holds devices securely at an adjustable viewing angle, and the stand collapses flat for easy storage or travel....

SKU: AF-2176 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a narrow bevel finish. Slot the LED through the opening, insert the plastic retaining cap, and tighten the threaded washer for a clea...

SKU: AF-2178 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a wide concave bevel finish. The concave bezel creates a recessed look around the LED, adding a polished, professional touch to panel...

SKU: AF-2177 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a wide convex bevel finish. The raised convex bezel adds a bold, dome-shaped profile around the LED, giving panels and enclosures a d...

SKU: PL-2698 | Brand: Pololu

M3 Phillips head machine screws, 16 mm long. A common fastener size used in electronics enclosures, 3D printer assemblies, robotics builds, and general prototyping. Sold in a pack of 25. Specifications Thread Size:...

SKU: SF-PRT-08995 | Brand: SparkFun

Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below. Sold in single units.

SKU: SF-PRT-08993 | Brand: SparkFun

A standard Phillips head machine screw with 2-56 thread and a length of 9.5 mm (3/8"). Compatible with 2-56 nuts for securing panels, button pads, and small electronic assemblies. Specifications Head Type – Phillip...

SKU: PL-1069 | Brand: Pololu

This M3 hex nut is made from steel, is zinc-plated, and comes in packs of 25.

SKU: SF-PRT-10453 | Brand: SparkFun

There are your standard Philips-head 4-40 screws. They are ¼" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: SF-PRT-10450 | Brand: SparkFun

Standard Philips-head 4-40 screws. They are 1" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: PI-COM2100 | Brand: Pimoroni

Our standoffs are engineered specifically to keep your Pi HAT or pHAT snug and supported on your Pi while also keeping the two boards separated. They're the perfect companion for any Pi HAT/p...

SKU: PL-1075 | Brand: Pololu

This M3, pan-head screw is 5 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: PL-1964 | Brand: Pololu

This #4-40, pan-head screw is 1 1/4″ (1.25″) long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: PL-733 | Brand: Pololu

The Tamiya 70171 3mm Threaded Shaft Set includes two fully-threaded 3 × 150mm shafts with ball joints and connectors for building control rods with three-dimensional movement. The shafts can be cut to any desired leng...

SKU: PL-1039 | Brand: Pololu

The hardware kit for the Pololu 3pi robot expansion board. This contains the standoffs, screws, nuts, and headers needed to mount an expansion PCB above the 3pi robot — but does not include the expansion PCB itself. U...

SKU: PL-1957 | Brand: Pololu

This #2-56, pan-head screw is 7/16″ long (0.4375″). It is made from steel, is zinc-plated, and comes in packs of 25.