Enclosures & Hardware

SKU: DF-FIT0160 | Brand: DFRobot

This compact bracket enables convenient mounting of popular micro metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This v...

SKU: AF-6057 | Brand: Adafruit

SKU: DF-DFR0191-R | Brand: DFRobot

This DIN Rail Mount Bracket provides quick and easy mounting for Arduino, which allows you to conveniently build up your Arduino-related projects. Made of high-quality PVC material, it is durable and fireproof, and we...

SKU: AF-2362 | Brand: Adafruit

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations...

SKU: AF-1215 | Brand: Adafruit

Get swinging with this handy plastic hinge, attach it to your 20mm extrusion and you can have parts that swing open 180 degrees. Using our button screws, the bumpy heads make it close around ~170 degrees, you can subs...

SKU: AF-2359 | Brand: Adafruit

The Adafruit Raspberry Pi A+ Case is a slim, durable polycarbonate enclosure designed specifically for the Raspberry Pi Model A+. With a smoke-tinted base and clear top, it offers a clean, professional look while keep...

SKU: SF-COM-11840 | Brand: SparkFun

These snap-in plastic LED holders provide a clean, secure way to panel-mount 5 mm LEDs. Simply press the LED into the holder and snap the holder into a 7.5 mm (19/64″) mounting hole — no screws or adhesive required. T...

SKU: AF-6433 | Brand: Adafruit

Keep your Adafruit MagTag safe and looking sharp with this custom-designed 3D-printed enclosure. The snap-together two-piece case accommodates all connection ports and features flexible push tabs for the four front bu...

SKU: AF-6183 | Brand: Adafruit

Here is a cute, minimal snap-on mount for your QT Py to keep it safe during use and transport. It has been custom-designed and 3D printed to accommodate the USB-C connector, along with four M3 mounting holes. No screw...

SKU: AF-6126 | Brand: Adafruit

Here is a cute and minimal enclosure for your Adafruit bq25185 USB / DC / Solar Charger with 5V Boost Board to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate al...

SKU: AF-6124 | Brand: Adafruit

This custom-designed 3D-printed enclosure is made specifically for the Adafruit bq25185 USB/DC/Solar Charger with 3.3V Buck board. The snap-together design requires no screws or glue — simply press the two halves toge...

SKU: AF-6114 | Brand: Adafruit

A snap-on enclosure designed specifically for the Adafruit Universal USB / DC / Solar Lithium Ion/Polymer Charger (bq24074). This 3D-printed case protects the charger board while providing full access to all ports and...

SKU: AF-6054 | Brand: Adafruit

The Feather Mount for LEGO-Compatible Brick Systems lets you securely attach any standard-sized Feather or FeatherWing board (2" × 0.9" / 51 mm × 23 mm) to LEGO-compatible brick plates. No hot glue, epoxy, or tape nee...

SKU: SF-COM-25893 | Brand: SparkFun

This is a 5mm right angle light pipe to get the light of an LED out the end plate of an enclosure. We couldn't find a light pipe that fit all our needs, so we made it! This clip snaps over any SMD LED that is 1206 siz...

SKU: AF-6015 | Brand: Adafruit

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws...

SKU: AF-6002 | Brand: Adafruit

Here is a cute and minimal enclosure for your QT Py to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the USB-C connector. No screws or glue are required; simpl...

SKU: AF-5998 | Brand: Adafruit

Here is a cute and minimal enclosure for your Pixel Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button, 3-pin JST SH port, and the 4 ter...

SKU: AF-5981 | Brand: Adafruit

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws...

SKU: DF-DFR0216-R | Brand: DFRobot

This DIN Rail Mount Bracket provides quick and easy mounting for Arduino, which allows you to conveniently build up your Arduino-related projects. Made of high-quality PVC material, it is durable and fireproof, and...

SKU: AF-5086 | Brand: Adafruit

Back in my day, if you wanted a mechanical keyboard, you had to purchase a massive IBM Model M Keyboard but now you can DIY your very own compact keyboards with your very favorite layouts to make the keeb of...