Enclosures & Hardware

SKU: AF-97 | Brand: Adafruit

A blank metal tin in the classic Altoids mints size — the larger format, perfect for housing electronics projects that need a bit more room. A popular choice for DIY builds and portable project enclosures. Specificat...

SKU: AF-3299 | Brand: Adafruit

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the...

SKU: AF-550 | Brand: Adafruit

Small self-adhesive rubber bumper feet for electronics boards and devices. Stick them to the bottom of any PCB to protect your desk, prevent sliding, and provide clearance for through-hole solder joints underneath. T...

SKU: DF-FIT0725 | Brand: DFRobot

Put on a sturdy and beautiful enclosure for your electronic project!This project box is made from high-quality ABS material, and the surface of the enclosure is sandblasted. There are screws in the package for conveni...

SKU: AF-5774 | Brand: Adafruit

The Adafruit Swirly Aluminum Mounting Grid provides a mechanical substrate for mounting small microcontroller boards, sensors, and Feathers that use STEMMA QT plug-and-play connections. When you're snapping boards tog...

SKU: AF-4685 | Brand: Adafruit

A comprehensive 420-piece set of black nylon M3 screws, nuts, and hex standoffs in a reusable storage container. Nylon fasteners are non-conductive, making them ideal for mounting PCBs and breakout boards without inte...

SKU: AF-3700 | Brand: Adafruit

A candy-coloured zipper case that's the perfect size for makers on the go. Instead of tossing your Raspberry Pi or Metro M0 Express into the abyss of your backpack, keep it safe and organised in this compact pouch. S...

SKU: DF-FIT0184 | Brand: DFRobot

A 10-pack of M3 × 30mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent 30mm spacing and secure mechanical support. The male/female de...

SKU: SF-PRT-11366 | Brand: SparkFun

This is the Big Red Box! These beefy, bright red, flanged, plastic enclosures will give your widget the protection (and attention) it deserves. You’ve probably seen these used to enclose radio equipment or antenna bal...

SKU: AF-1094 | Brand: Adafruit

Use this nice fixed laser mount to attach any of our laser diode modules to your desk, robot, shark, etc. A set-screw holds the laser in place. Has a flat mounting plate with four holes for easy attachment and adjustm...

SKU: AF-1297 | Brand: Adafruit

You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one here! This mount will fit any NEMA-17 motor (with 31mm hole...

SKU: DF-FIT0182 | Brand: DFRobot

A 10-pack of M3 × 20mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking ...

SKU: AF-16 | Brand: Adafruit

A blank metal tin in the classic Altoids gum size — perfect for housing small electronics projects. Custom-made with a flattened bottom (instead of rounded) so components sit flush inside. Ideal for building portable ...

SKU: DF-FIT0065 | Brand: DFRobot

A 10-pack of M3 × 6mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking s...

SKU: AF-903 | Brand: Adafruit

Store your project safe and sound in this nice weatherproof box with a clear top. We picked up this box because we like the machinable ABS plastic body and tough clear polycarbonate cover, the built in weatherproof ga...

SKU: AF-5051 | Brand: Adafruit

Sleek black anodized aluminum bumper feet with embedded rubber grips for no-slip support. Originally designed for keyboard enclosures, these machined aluminium feet look great on any electronics project, enclosure, or...

SKU: AF-1116 | Brand: Adafruit

Board edge mounting standoffs designed to grip standard 1.6 mm (0.062") thick PCBs by the edge or corner — no mounting holes required. An elegant solution for securing boards like the original Raspberry Pi or any PCB ...

SKU: AF-3704 | Brand: Adafruit

A compact, candy-coloured zipper case designed for makers on the go. Perfectly sized for carrying a Raspberry Pi, Arduino, or other single-board computer along with essential accessories like USB cables, jumper wires,...

SKU: AF-3702 | Brand: Adafruit

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. Instead of chucking your Raspberry Pi or Metro M0 Ex...

SKU: AF-3701 | Brand: Adafruit

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. Instead of chucking your Raspberry Pi or Metro M0 Ex...