Enclosures & Hardware

SKU: SF-PRT-10789 | Brand: SparkFun

Non-conductive nylon nuts in the 4-40 thread size. Ideal for securing PCBs and electronics without the risk of shorting traces or ground planes around mounting holes. Specifications Thread Size – 4-40 Material – N...

SKU: SF-PRT-10232 | Brand: SparkFun

A standard zinc-plated 4-40 UNC hex nut. Suitable for securing 4-40 machine screws in robotics assemblies, electronics enclosures, and prototyping builds. Sold individually. Specifications Thread – 4-40 UNC Materi...

SKU: TB-HB6065 | Brand: Little Bird

4 cases in the range. The two smaller sizes have moulded in square cable entries on each end, and holes for screw bolts to mount the case. Specifications Width ...

SKU: DF-FIT0194 | Brand: DFRobot

A 10-pack of M3 × 30mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking ...

SKU: DF-DFR0224 | Brand: DFRobot

The Arduino Screwless Terminal Shield breaks out all Arduino Uno-compatible header pins to spring-loaded push-in terminal blocks. Press the lever, insert your wire, and release — no screwdriver needed. The shield stac...

SKU: DF-FIT0273 | Brand: DFRobot

A 10-pack of M3 × 16mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: DF-FIT0281 | Brand: DFRobot

A 10-pack of M3 × 25mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: SF-PRT-08233 | Brand: SparkFun

A 2-pin polarised male header with 0.1″ (2.54 mm) pin spacing, designed for PCB and perfboard mounting. The keyed housing prevents reversed connections, making it ideal for power and sensor wiring where correct polari...

SKU: SF-PRT-08095 | Brand: SparkFun

Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed. T...

SKU: SF-COM-11840 | Brand: SparkFun

These snap-in plastic LED holders provide a clean, secure way to panel-mount 5 mm LEDs. Simply press the LED into the holder and snap the holder into a 7.5 mm (19/64″) mounting hole — no screws or adhesive required. T...

SKU: PL-957 | Brand: Pololu

This ball caster was originally released as a replacement part for the 3pi robot, but the 1/2″ ball can also be used a replacement part for the newer 3pi+ robot, which has the housing for the ball built directly into ...

SKU: PL-1985 | Brand: Pololu

Keep your components separated with this 25-pack of 12mm-long (0.47") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with...

SKU: PL-1959 | Brand: Pololu

A pack of 25 steel machine screws in the #2-56 thread size with a 1-1/4″ (31.75 mm) length. These pan-head Phillips screws are zinc-plated for corrosion resistance and are commonly used in robotics, electronics enclos...

SKU: SF-PRT-10454 | Brand: SparkFun

Standard 4-40 zinc-plated hex nuts. A common thread size used in electronics enclosures, PCB mounting, and small hardware assemblies. Specifications Thread Size – 4-40 (UNC) Material – Zinc-plated steel Quantity ...

SKU: DF-FIT0506 | Brand: DFRobot

This pack of five pure copper heatsinks provides effective passive cooling for small surface-mount components. Designed for the LattePanda single-board computer, they also work well on stepper motor drivers, SoCs, and...

SKU: SF-COM-09773 | Brand: SparkFun

This is a 5mm PTH fuse clip intended to be used with our Glass Fuses. Note: These are sold in single units. If you intend to secure a fuse using these clips you’ll need two clips. We recommend ordering two. Part #: ...

SKU: LB-LS7583 | Brand: Little Bird

A compact dual-fan cooling module for enclosures, 3D-printed builds, network gear, and DIY electronics. Two matched 70×70×15mm fans provide effective airflow and heat dissipation, powered via USB for simple plug-and-g...

SKU: LB-LS7538 | Brand: Little Bird

A sturdy metal mounting bracket for servos, providing a stable platform for robotics and motion projects. Precision-cut mounting holes ensure secure servo installation for joints, linkages, arms, and custom assemblies...

SKU: AF-6433 | Brand: Adafruit

Keep your Adafruit MagTag safe and looking sharp with this custom-designed 3D-printed enclosure. The snap-together two-piece case accommodates all connection ports and features flexible push tabs for the four front bu...

SKU: SF-PRT-10037 | Brand: SparkFun

This is a front faceplate that lets your Crib for Arduino accommodate the Arduino and Ethernet Shield in one secure, clean looking, easy to acces package. Have you ever tried to punch or cut square holes for the Ard...