Enclosures & Hardware

SKU: AF-3299 | Brand: Adafruit

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the...

SKU: LB-MAKER-ORANGE | Brand: Little Bird

The Maker Case 12cm is a compact zippered pouch designed for carrying small electronics on the go. It fits boards like the Raspberry Pi, micro:bit, Arduino Nano, and similar single-board computers or microcontrollers,...

SKU: AF-5721 | Brand: Adafruit

We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at the edge of the camera board, and don't even mention trying to ...

SKU: DF-FIT0604 | Brand: DFRobot

A transparent ABS case designed for the Raspberry Pi Zero and Zero W. The case features large cutouts for the GPIO header and camera port, keeping all connections accessible while protecting the board. The GPIO 40-pin...

SKU: AF-2337 | Brand: Adafruit

Finally we get our very own super sweet sixteen... 16 millimeters that is! Our Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT or other Pi accessories w...

SKU: EL-MP014888 | Brand: Jaycar

A black ABS enclosure designed specifically for the Raspberry Pi 5 with a 7″ touchscreen display. Manufactured in the UK, it features precision cut-outs for all connections and dedicated ventilation slots for efficien...

SKU: AF-3700 | Brand: Adafruit

A candy-coloured zipper case that's the perfect size for makers on the go. Instead of tossing your Raspberry Pi or Metro M0 Express into the abyss of your backpack, keep it safe and organised in this compact pouch. S...

SKU: AF-2336 | Brand: Adafruit

11 millimeters that is! Our Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping the two boards separated, in particular the HDMI port. These...

SKU: DF-FIT0991 | Brand: DFRobot

The Argon NEO 5 BRED is a polished aluminium case for the Raspberry Pi 5, combining passive heatsink cooling with an integrated active cooling fan. Cold air enters through intake vents and the fan circulates airflow t...

SKU: AF-4553 | Brand: Adafruit

We dig the sleek lines and satisfying heft of this aluminum case. Handsomely designed and thoughtfully constructed with a built-in heat sink, this Flirc enclosure boasts both form and function. The sides are aluminum,...

SKU: LB-MAKER-16 | Brand: Little Bird

A compact zip-up carry case sized perfectly for makers on the move. Large enough for a Raspberry Pi, Arduino, or micro:bit with a shield attached, with an interior pocket for cables, probes, jumper wires, batteries, a...

SKU: AF-1434 | Brand: Adafruit

A two-piece adjustable mount from Pimoroni for the Raspberry Pi Camera Module. The design allows multiple angle positions and includes a 1/4"-20 threaded hole for attaching to a standard camera tripod. Compatible wit...

SKU: AF-2883 | Brand: Adafruit

The Adafruit Pi Protector for Raspberry Pi Zero is a minimal, crystal-clear acrylic protector that keeps your pocket-sized Pi Zero safe without adding bulk. Just two acrylic pieces secured with four screws — sleek, li...

SKU: PH-105480 | Brand: PiHut

Mount your Raspberry Pi camera case to a wall or ceiling with this adjustable bracket. The tilt and swivel mechanism lets you position your camera at just the right angle, then lock it in place with thumbscrews — idea...

SKU: DF-FIT0820 | Brand: DFRobot

Here comes a case that can hold the Raspberry Pi and the screen together.It consists of a metal case with a frosted tactile feel and a 3.5-inch TFT touch screen.The touch screen has a resolution of 480x320 and a refre...

SKU: EC-RPA20902C | Brand: Elecrow

This Argon NEO is designed specifically for the needs and functionality of the Raspberry Pi 4 Model B which is made with aluminum alloy and polished with a modern Space Grey finish for stunning aesthetics. The slid...

SKU: DF-FIT0715 | Brand: DFRobot

Rigid Armor protective case with super heat dissipation!This new aluminum case is capable of providing a better cooling solution for your Raspberry Pi 4B. Meanwhile, it can be access to all ports and slots of Pi 4B mo...

SKU: AF-4341 | Brand: Adafruit

A premium anodised aluminium enclosure for the Raspberry Pi 4 with completely silent passive cooling. The solid aluminium body acts as a heatsink for the main processor, keeping the Pi cool without any fans or moving ...

SKU: AF-2362 | Brand: Adafruit

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations...

SKU: AF-1116 | Brand: Adafruit

Board edge mounting standoffs designed to grip standard 1.6 mm (0.062") thick PCBs by the edge or corner — no mounting holes required. An elegant solution for securing boards like the original Raspberry Pi or any PCB ...