Electricity Kits

SKU: AF-5140 | Brand: Adafruit

Adding LEDs to anything makes it 5x better -- it's a scientific fact! But when you have LEDs, you've got wires and power supplies and all that stuff is kinda annoying. What if you could have LEDs that light up without...

SKU: LB-TRAFFIC-LED | Brand: Little Bird

Doing some breadboarding and want to make up your own set of traffic lights?This kit includes 1 x Red 10mm LED1 x Yellow 10mm LED1 x Green 10mm LED5 x 220ohm Resistors

SKU: LB-MICRO-INVENT | Brand: Little Bird

Get creative, connected and coding with a complete inventor kit for the BBC micro:bit. It includes a micro:bit board and a selection of parts for building and experimenting with multiple electronic circuits.You can wo...

SKU: SF-KIT-16274 | Brand: SparkFun

The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. Unlike previous weather kits we've carried, this micro:climate kit is Qwiic enabled and includes o...

SKU: LB-CTC-2-KIT | Brand: Little Bird

Unlock the mysteries of coding and electronics with the Crack the Code V2.0 Kit, specifically designed for the NSW Department of Education's second unit of work. This comprehensive kit provides students and educat...

SKU: LB-LAMP-PCB | Brand: Little Bird

This DIY Lamp Kit PCB provides a simple platform for building your own custom LED lamp. The board has pads for up to 8 LEDs wired in series, a switch, a current-limiting resistor, and a power input — giving you comple...

SKU: AF-5351 | Brand: Adafruit

Adding LEDs to anything makes it 5x better -- it's a scientific fact! But when you have LEDs, you've got wires and power supplies and all that stuff is kinda annoying. What if you could have LEDs that light up without...

SKU: SF-KIT-15631 | Brand: SparkFun

The SparkFun Inventor's Kit (SIK) for Arduino Uno is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete five ov...

SKU: LB-CTCBOX | Brand: Little Bird

Already run the Crack the Code unit of work and want to replenish your component box? At Little Bird Electronics we have put together a replenishment kit for your Crack the Code unit of work.   Kit Contains: ...

SKU: DF-FIT0189 | Brand: DFRobot

Variable resistors also named as potentiometer are electrical equipments having two terminal points in opposite direction. The terminals are used for electrical resistance in a circuit board. Variable resistors are...

SKU: LB-COM-2018 | Brand: Little Bird

This is the Components Kit for CTC (Crack the Code). The Crack the Code unit of work addresses 25 hours of the Digital Technologies context in the new Technology Mandatory syllabus in NSW.Designed for educational purp...

SKU: LB-FINCH-5 | Brand: Little Bird

Bulk pack of 5The Little Bird Finch is our smallest programmable board. The Finch is a tiny little  board designed to add flashy functionality to your project without taking up a lot of room. It has an ...

SKU: PI-COM-B005 | Brand: Pimoroni

580 resistors (29 values, 20 pieces of each) go into this great starter pack (or refill!) with a wide range of useful values. The kit contains 20 each of:10Ω22Ω47Ω68Ω100Ω120Ω150Ω180Ω220Ω270Ω330Ω470Ω560Ω680Ω1kΩ...

SKU: SF-KIT-14189 | Brand: SparkFun

The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete 16 circuits that will t...

SKU: SF-KIT-13815 | Brand: SparkFun

Your 5V system can wield great power with this big, beefy relay board. How does 20A on the NC contacts and 10A on the NO contacts at 220VAC sound? The SparkFun Beefcake Relay Control Kit contains all the parts you nee...

SKU: DF-KIT0111 | Brand: DFRobot

The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible w...

SKU: KI-5638 | Brand: Kitronik

The Line Following Buggy with :MOVE line following board for the BBC microbit is the newest version of our very popular line following buggy. It offers a significant upgrade in the form of our new :MOVE line follow...

SKU: SF-KIT-13154 | Brand: SparkFun

The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete 16 circuits that wil...

SKU: SF-KIT-14499 | Brand: SparkFun

If you use the SparkFun Inventor’s Kit in a classroom or workshop setting, you know that when a bunch of people get their hands on the same kit, things get lost/broken. That’s why we offer the SparkFun Inventor’s Kit ...

SKU: SF-KIT-11835 | Brand: SparkFun

The SparkFun Gram Piano Kit is a beginner-friendly soldering project that assembles into a working capacitive-touch musical keyboard. Once built, the piano plays a full octave of notes through touch-sensitive keys — n...