E-Textiles

SKU: AF-6197 | Brand: Adafruit

A warm-white LED filament shaped as the letter "G", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6205 | Brand: Adafruit

A warm-white LED filament shaped as the letter "N", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: LB-SLIDE-E | Brand: Little Bird

Introducing our E-Textiles Slide Switch pack, perfect for all your electronic textile projects! This pack includes 5 slide switches, each designed to provide a seamless and reliable connection for your e-textiles. Wit...

SKU: AF-6077 | Brand: Adafruit

If you’re looking to add a USB-C connector to your wearable tech project, check out our sewable connectors! This USB Type-C connector is mounted horizontally on a flexible, sewable base, with red and black power wires...

SKU: AF-6076 | Brand: Adafruit

If you want to add a Micro-B connector to your favorite garment for a wearable tech project, check out our sewable connectors! This Micro-B connector is mounted horizontally on a flexible, sewable base, with red and b...

SKU: AF-6075 | Brand: Adafruit

A 5.5/2.1mm DC barrel jack mounted on a flexible, sewable base for wearable tech and fabric-based projects. The jack sits horizontally with red (positive) and black (ground) wires extending from the bottom for easy po...

SKU: AF-5605 | Brand: Adafruit

These dLUX-dLITE succulent-shaped LEDs from Unexpected Labs are handcrafted decorative LEDs that look like tiny succulents when lit. Each LED is individually made, giving every piece a unique appearance — perfect for ...

SKU: AF-5491 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: SF-DEV-14629 | Brand: SparkFun

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...

SKU: PR-PIM317 | Brand: Little Bird

A cute flower-shaped light sensor designed to connect to Bearables LED badges using conductive thread. When the sensor is covered or it gets dark, your connected badge's LEDs light up — bringing your wearable to life ...

SKU: KI-2762 | Brand: Kitronik

Add an individually addressable full colour LED to your E-Textiles projects with the Kitronik Sewable ZIP LED. This new addition to our Electro Fashion range incorporates a full colour addressable ZIP LED, which ca...

SKU: KI-2746 | Brand: Kitronik

When using through hole LEDs it can be hard to form the eyelets and then work out which leg is positive and negative. That's where these Sewable LED Holders come in! The 5mm LED holder boards, quickly and easily take ...

SKU: AF-3673 | Brand: Adafruit

This kit is designed for use with the electronic textiles unit in the Exploring Computer Science (ECS, exploringcs.org) introductory computing curriculum for secondary students. It contains most of the materia...

SKU: AF-3672 | Brand: Adafruit

This kit is designed for use with the electronic textiles unit in the Exploring Computer Science (ECS, exploringcs.org) introductory computing curriculum for secondary students. It contains most of the materia...

SKU: SF-COM-11813 | Brand: SparkFun

Have you ever been listening to music on your MP3 player and a song you don’t want to listen to comes on but you don’t want to reach into your bag to change the track? The 5 Button Fabric Button Pad, from Sensing Tex,...

SKU: AF-1871 | Brand: Adafruit

A sewable breakout board with a CR2032 coin cell battery holder, built-in on/off switch, and 0.1" pitch breakout pins. The board provides two ground pins, one switched power pin, and one always-on power pin — giving y...

SKU: AF-2273 | Brand: Adafruit

This soft potentiometer is an interesting way to add an adjustable resistor / slide potentiometer to your wearable. You can use it to adjust the brightness of an LED, or as a sensor input to your Flora or Gemma. When ...

SKU: AF-2566 | Brand: Adafruit

This product's about as simple as a cup of lemonade on a hot summer day.  And, like lemonade, it's just three components! This board is a sewable adapter with a 3-pin JST wiring adapter.  It's a perf...

SKU: DF-DFR0199-R | Brand: DFRobot

This LilyPad LED Micro is Discontinued Now, We recommend other LilyPad as a suitable replacement. Here is a simple 5 pack of red LED micro for LilyPad. Need a smaller way to add some 'twinkle' to your Li...

SKU: DF-DFR0199-B | Brand: DFRobot

This LilyPad LED Micro is Discontinued Now, We recommend other LilyPad as a suitable replacement. Here is a simple 5 pack of blue LED micro for LilyPad. Need a smaller way to add some 'twinkle' to your LilyPad ...