E-Textiles

SKU: PI-TEK002 | Brand: Pimoroni

A tiny, vibrating motor, easily attachable to paper or fabric! Just connect 3-5V across it, polarity doesn't matter, and it'll BUUUUZZZZZZ!!! The voltage (and hence current) supplied from LIR2032 recharge...

SKU: AF-6197 | Brand: Adafruit

A warm-white LED filament shaped as the letter "G", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6205 | Brand: Adafruit

A warm-white LED filament shaped as the letter "N", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: LB-SLIDE-E | Brand: Little Bird

Introducing our E-Textiles Slide Switch pack, perfect for all your electronic textile projects! This pack includes 5 slide switches, each designed to provide a seamless and reliable connection for your e-textiles. Wit...

SKU: AF-6077 | Brand: Adafruit

If you’re looking to add a USB-C connector to your wearable tech project, check out our sewable connectors! This USB Type-C connector is mounted horizontally on a flexible, sewable base, with red and black power wires...

SKU: AF-6076 | Brand: Adafruit

If you want to add a Micro-B connector to your favorite garment for a wearable tech project, check out our sewable connectors! This Micro-B connector is mounted horizontally on a flexible, sewable base, with red and b...

SKU: AF-6075 | Brand: Adafruit

A 5.5/2.1mm DC barrel jack mounted on a flexible, sewable base for wearable tech and fabric-based projects. The jack sits horizontally with red (positive) and black (ground) wires extending from the bottom for easy po...

SKU: AF-5605 | Brand: Adafruit

These dLUX-dLITE succulent-shaped LEDs from Unexpected Labs are handcrafted decorative LEDs that look like tiny succulents when lit. Each LED is individually made, giving every piece a unique appearance — perfect for ...

SKU: AF-5491 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: SF-DEV-14629 | Brand: SparkFun

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...

SKU: KI-2746 | Brand: Kitronik

When using through hole LEDs it can be hard to form the eyelets and then work out which leg is positive and negative. That's where these Sewable LED Holders come in! The 5mm LED holder boards, quickly and easily take ...

SKU: DF-FIT0743 | Brand: DFRobot

This smooth stainless steel fibre thread is made for sewing conductivity into fabric and wearable projects. It offers low resistance, good thermal conductivity, a high melting point, and high-temperature resistance.Ea...

SKU: DF-FIT0744 | Brand: DFRobot

This smooth stainless steel fibre thread lets you sew conductive paths into fabric for wearable electronics and soft-circuit projects. It offers low resistance, good thermal conductivity, a high melting point and high...

SKU: DF-FIT0745 | Brand: DFRobot

This smooth stainless steel fibre sewing thread is conductive, making it handy for wearable electronics, soft circuits and other low-current maker projects. Each roll includes 10m of thread with a resistance of about ...

SKU: DF-FIT0746 | Brand: DFRobot

This smooth stainless steel fibre sewing thread is conductive, making it handy for e-textiles, wearable electronics and other small-current projects. It has a resistance of about 9Ω per metre and comes as a 7 metre ro...

SKU: DF-FIT0747 | Brand: DFRobot

This smooth stainless steel fibre conductive sewing thread is handy for soft circuits, wearables and e-textile projects where you need to stitch an electrical connection into fabric.Each roll provides 5m of thread wit...

SKU: DF-FIT0748 | Brand: DFRobot

This smooth stainless steel fibre sewing thread is conductive, making it handy for wearable electronics, soft circuits and other small-current projects where ordinary wire is too stiff.Each roll includes 1 metre of th...

SKU: LB-LR0347A | Brand: Little Bird

This E-Textiles  Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on ...

SKU: AF-4429 | Brand: Adafruit

This 13.56 MHz RFID/NFC sewable button uses an NTAG213 chip in a compact 24 mm laundry-tag form factor. It can be sewn into garments, attached to equipment, or embedded in projects for contactless identification, data...

SKU: KI-2715 | Brand: Kitronik

A starter kit for e-textiles and wearable electronics from Kitronik's Electro-Fashion range. This Discovery Pack includes a curated selection of sewable components — LEDs, switches, coin cell holders, conductive threa...