E-Textiles
Wearable electronics, conductive thread, LilyPad boards, and sewable components for fashion-meets-tech projects. Create interactive clothing and accessories.
E-textiles LED Module Tri-color Module RGB
$1.40
E-Textiles Rainbow 7 LEDs (6 colours)
$5.85
Conductive Thread Bobbin - 30ft (Stainless Steel)
$12.70
EagLED - Sewable Electronics Kit E-Textile Snippable Board with Buzzer
The EagLED with buzzer is a Little Bird Arduino-compatible wearable electronics kit made for e-textile and sewable pr...
$46.20
E-Textiles LED module 5pcs White
SKU: LB-LR0220 | Brand: Little Bird
Light up your E-Textile projects with this set of 5 E-Textile Compatible LED modules. With a working voltage of 3V - 5V and a current of 40mA, these LEDs are perfect for adding a touch of brightness to your wearable e...
Delivered by Fri 26 Jun
E-textiles LED Module Red Single
SKU: LB-ETEXTILELED-R | Brand: Little Bird
This is a simple single unit RED E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB tha...
Delivered by Fri 26 Jun
E-textiles LED Module Blue Single
SKU: LB-ETEXTILELED-B | Brand: Little Bird
This is a simple single unit BLUE E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB th...
Delivered by Fri 26 Jun
E-Textiles LilyTiny Compatible ATTiny board
SKU: LB-TINY | Brand: Little Bird
The CJMCU card is a small microcontroller based on the ATTiny85 chipset. It is perfect for wearable projects. Also widely used in electronic projects due to its compatibility with the Arduino IDE, bringing an ATtiny85...
Delivered by Fri 26 Jun
Little Bird Finch Board ATTiny85
SKU: LB-FINCH | Brand: Little Bird
The Little Bird Finch is our smallest programmable board for e-textiles. Australian made, and a great alternative to the Lilypad / Lilytiny, the Finch is designed to add flashy functionality to your e-textiles or cosp...
Delivered by Fri 26 Jun
LilyPad RGB LED
SKU: SF-DEV-13735 | Brand: SparkFun
Blink any color you need! Use the LilyPad RGB LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can produce a broad variety of colors. Each of the colors in the RGB LED are connecte...
Delivered by Tue 7 Jul
LilyPad Light Sensor
SKU: SF-DEV-14629 | Brand: SparkFun
The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...
Delivered by Tue 7 Jul
E-Textiles Battery Holder with Switch
SKU: LB-LR0347A | Brand: Little Bird
This E-Textiles Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on ...
Out of stock
1m LilyPad Supporting Conductive Sewing Thread Wearable
SKU: LB-LR0309-45 | Brand: Little Bird
A 1-metre length of soft conductive sewing thread made from stainless steel, designed for wearable electronics projects. Use it to sew electrical connections between LilyPad components, sewable LEDs, and batteries — r...
Out of stock
Lilypad Battery Holder with Switch - 10 PACK
SKU: LB-BK-LR0347A | Brand: Little Bird
A sewable coin cell battery holder with built-in on/off slide switch, designed for e-textile and wearable electronics projects. This bulk 10-pack is ideal for classrooms, workshops, and makerspaces. Each holder accep...
Out of stock
Sewable Battery Board
SKU: PI-TEK001 | Brand: Pimoroni
A lightweight, sewable battery board that's great for paper and fabric engineering projects. Works with CR2032 coin cell batteries. The voltage (and hence current) supplied from LIR2032 rechargeable ...
Out of stock
