Displays & User Interface

SKU: AF-1110 | Brand: Adafruit

The Adafruit RGB Negative 16×2 LCD + Keypad Kit is a Pi Plate that combines a 16×2 character LCD with RGB backlight and a 5-button keypad, all controlled over I2C using just two pins. The negative-style display shows ...

SKU: AF-1115 | Brand: Adafruit

The Adafruit Blue & White 16×2 LCD + Keypad Kit is a Raspberry Pi add-on plate that provides a 16×2 character LCD display, 5 navigation buttons, and backlight control — all using just the two I2C pins on the Pi. The I...

SKU: PI-COM2401 | Brand: Pimoroni

These neat little LCD panels, in two sizes, go black when a current is passed through them. Perfect for creating your own pair of "deal with it" sunglasses!Essentially single pixel LCD displays, these panels polarise ...

SKU: PI-COM2400 | Brand: Pimoroni

This small LCD shutter panel acts as a single-pixel LCD display that switches between transparent and opaque states. Apply 3V to polarise the panel and it goes completely black; pull the voltage low or short the termi...

SKU: PR-PIM308 | Brand: Little Bird

A low-energy, high-falutin, electronic paper (ePaper / eInk / EPD) display for your Pi, in three different colour schemes: red/black/white, yellow/black/white, and black/white!NOW IN NEW COLOUR SCHEMES!Inky pHAT's be...

SKU: AF-4098 | Brand: Adafruit

Add a large, vibrant tri-colour eInk display to your microcontroller project with this 2.7" breakout board. The panel displays red, black, and white pixels at 264×176 resolution that remain visible even with power com...

SKU: PR-PIM274 | Brand: Little Bird

Use Four Letter pHAT to display... four letter words. Not that sort! Four Letter pHAT has four 14-segment displays that you can use to display text, numbers, and a host of other characters. Its LEDs are a beautiful...

SKU: PR-PIM032 | Brand: Little Bird

The Flotilla Matrix module features an 8×8 white LED matrix driven by an IS31FL3730 controller chip. It connects to the Flotilla ecosystem via a micro USB connector for scrolling text, simple animations, smiley faces,...

SKU: PI-ESP005 | Brand: Pimoroni

A smart LCD with Bluetooth LE. Monitor and control other Bluetooth LE devices, act as a wireless display, create your own smart conference badge, or even just display the status of your code - all while drawing ...

SKU: PR-PIM146 | Brand: Little Bird

The Display-O-Tron Breakout pairs a high-contrast 16 × 3 character LCD with an RGB backlight on a compact breakout board. It runs from either 3.3 V or 5 V and supports SPI, 4-bit, and 8-bit interfaces via the ST7036 c...

SKU: PR-PIM179 | Brand: Little Bird

The Pimoroni Display-O-Tron HAT packs a 16×3 character LCD display, six-zone RGB backlight, bar graph LEDs, and six capacitive touch buttons into one slim HAT for Raspberry Pi. It's ideal for internet radio, home auto...

SKU: PR-PIM113 | Brand: Little Bird

The Display-O-Tron HAT adds a 16×3 character LCD display, 6-zone RGB LED backlight, bar graph LEDs, and six capacitive touch buttons to your Raspberry Pi — all in one slim HAT-format board. Ideal for internet radio co...

SKU: TB-XC4454 | Brand: Little Bird

This Arduino-compatible LCD shield combines a 16×2 character LCD display with a six-button keypad on a single board. The backlit display and built-in navigation buttons (up, down, left, right, select, and reset) make ...

SKU: PI-COM0505 | Brand: Pimoroni

A common-anode 4-digit 7-segment LED display in white, ideal for building clocks, timers, counters, and other numeric readouts. The display features 16 through-hole pins controlling four digits, each with a decimal po...

SKU: PI-COM0503 | Brand: Pimoroni

A common-anode 4-digit 7-segment LED display in red, ideal for building clocks, timers, counters, and other numeric readouts. The display features 16 through-hole pins controlling four digits, each with a decimal poin...

SKU: PI-COM0504 | Brand: Pimoroni

A common-anode 4-digit 7-segment LED display in green, ideal for building clocks, timers, counters, and other numeric readouts. The display features 16 through-hole pins controlling four digits, each with a decimal po...

SKU: PI-COM0501 | Brand: Pimoroni

A common-anode 4-digit 7-segment LED display in blue, ideal for building clocks, timers, counters, and other numeric readouts. The display features 16 through-hole pins controlling four digits, each with a decimal poi...

SKU: AF-3578 | Brand: Adafruit

Pimoroni's HyperPixel features a 4.0" display with 800x480 18-bit color pixels and a capacitive touch overlay, making it more sensitive and responsive than a resistive touch display. The plate uses the high speed DPI ...

SKU: PI-COM0506 | Brand: Pimoroni

A simple and affordable 16×2 character LCD module for displaying text, readings, and status messages from your microcontroller. With pre-soldered header pins, it's ready to connect straight to an Arduino, Raspberry Pi...

SKU: PI-COM0500 | Brand: Pimoroni

This 1.2″ 8×8 square LED matrix features 64 white LEDs in a compact grid format, ideal for scrolling text signs, simple animations, and small pixel displays. The module fits directly onto a breadboard with 0.1″ pin sp...