Displays & User Interface

SKU: AF-871 | Brand: Adafruit

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright yellow dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA and SC...

SKU: SF-COM-09481 | Brand: SparkFun

This compact 4-digit 7-segment display in blue features 10 mm digit height with a common-anode configuration. Each digit has its own decimal point, and the display includes individually controllable apostrophe and col...

SKU: AF-872 | Brand: Adafruit

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright yellow-green dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA ...

SKU: AF-879 | Brand: Adafruit

The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in yellow makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so ...

SKU: AF-2088 | Brand: Adafruit

The Adafruit 1.44" Colour TFT LCD Display Breakout is a compact 128×128 pixel screen driven by the ST7735R controller over 4-wire SPI. Unlike older CSTN displays, this is a true TFT with full 16-bit colour and fast re...

SKU: AF-715 | Brand: Adafruit

The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connecti...

SKU: AF-3502 | Brand: Adafruit

The Adafruit SHARP Memory Display Breakout features a 1.3" 168×144 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The display shows crisp blac...

SKU: DF-DFR0488 | Brand: DFRobot

DFRobot FireBeetle is a low-power consumption micro-controller intentionally designed for Internet of Things (IoT). This series micro-controllers aims at IoT node of low-power consumption, attending to build the...

SKU: DF-DFR0485 | Brand: DFRobot

DFRobot FireBeetle is a low-power consumption micro-controller intentionally designed for Internet of Things (IoT). This series micro-controllers aims at IoT node of low-power consumption, attending to build the Io...

SKU: DF-DFR0484 | Brand: DFRobot

DFRobot FireBeetle is a low-power consumption micro-controller intentionally designed for Internet of Things (IoT). This series micro-controllers aims at IoT node of low-power consumption, attending to build the Io...

SKU: AF-6366 | Brand: Adafruit

This compact ePaper module is designed for adding a small, paper-like display to your electronics project. It features a 2.13-inch quad-colour panel with a 250 x 122 pixel resolution and on-board SRAM.2.13-inch eInk/e...

SKU: AF-6313 | Brand: Adafruit

Add a crisp monochrome display and simple user controls to your Feather project with this fully assembled FeatherWing. It combines a 128x64 white OLED screen with three user buttons labelled A, B and C, plus a reset b...

SKU: SF-PRT-26851 | Brand: SparkFun

Add five-way navigation input to an I2C project without building a button matrix from scratch. Press up, down, left, right or centre on the low-profile directional pad to send button input to your microcontroller.The ...

SKU: SF-LCD-13722 | Brand: SparkFun

Add a tiny, crisp OLED to your next microcontroller project without taking up much space. This breakout carries a monochrome Blue-on-Black display that is only 64 pixels wide by 48 pixels tall, yet still has room for ...

SKU: DF-DFR1262 | Brand: DFRobot

This 6.67-inch flexible AMOLED panel is made for curved, form-fitting display prototypes where a rigid screen will not suit the design. Its bendable substrate keeps the module very thin, with a maximum thickness of ju...

SKU: DF-FIT1030 | Brand: DFRobot

This 7-inch multi-touch display is made specifically for the LattePanda IOTA and LattePanda 3 Delta single-board computers. It connects over eDP (Embedded DisplayPort), using the native display output on those boards ...

SKU: DF-DFR0785-W | Brand: DFRobot

This Gravity LED button is a simple illuminated push button with a transparent cap, designed for interactive Arduino and micro:bit projects. When the button is pressed, the internal white LED turns on to provide clear...

SKU: DF-DFR1221 | Brand: DFRobot

Build compact visual interfaces, IoT dashboards and voice-enabled projects around an ESP32-S3R8 module with an integrated circular touchscreen. The board combines processing, display, touch, wireless connectivity, aud...

SKU: WS-29086 | Brand: Waveshare

This compact ESP32-S3 development board combines a 2.8 inch round IPS LCD with touch control, WiFi and Bluetooth BLE 5, making it a handy platform for HMI, dashboard and embedded GUI projects.It uses an Xtensa 32-bit ...

SKU: DF-DFR1092 | Brand: DFRobot

This 3.5-inch display module combines a 480 × 320 IPS panel with capacitive touch for ESP32 and Arduino projects. Its optical bonding process laminates the touch panel and display together, improving clarity while hel...