Displays & User Interface

SKU: WS-29380 | Brand: Waveshare

This 0.71″ round LCD module packs a 160 × 160 pixel IPS display with 65K colours into a tiny 20 × 22 mm footprint. Driven by the GC9D01 controller over a 4-wire SPI interface, it's easy to integrate with Raspberry Pi ...

SKU: AF-6113 | Brand: Adafruit

The Adafruit Newxie 1.14" 240×135 Colour TFT Display is a compact, high-resolution IPS display designed for vertical stacking on a 0.1" grid — inspired by the form factor of classic nixie tubes. Despite its small size...

SKU: EF-EF05016 | Brand: ElecFreaks

This is an OLED display in 128×64. It has a slim profile, high brightness, high contrast, and a large screen. We can use it to display the recorded temperature, humidity, date, and other information, giving it practic...

SKU: WS-25269 | Brand: Waveshare

This 7" IPS capacitive touchscreen from Waveshare connects to the Raspberry Pi via the DSI interface for a driver-free, plug-and-play experience. Featuring 800×480 resolution, 5-point multi-touch on toughened glass, a...

SKU: AF-5783 | Brand: Adafruit

The EYESPI Pi Beret is a slim HAT for Raspberry Pi that provides an EYESPI display connector, STEMMA QT port, buttons, and a slide switch — everything you need to add a colour TFT or E-Ink display and sensors to your ...

SKU: AF-5727 | Brand: Adafruit

The Adafruit RP2040 Feather ThinkInk makes it easy to connect almost any common e-Paper/e-Ink display with a standard 24-pin FPC connector. E-paper displays retain their image even when power is completely disconnecte...

SKU: AF-5004 | Brand: Adafruit

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of lavender DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em o...

SKU: SF-DEV-16985 | Brand: SparkFun

The SparkFun MicroMod Input and Display Carrier Board is a great way to add data and input visibility to your MicroMod project. Want to create your own embedded game? How about displaying data that is remotely collect...

SKU: EC-CDE20032P | Brand: Elecrow

An Arduino Uno shield that makes it easy to drive a 16×32 RGB LED matrix panel with a HUB75 connector. Instead of wiring up 12 individual jumper wires, this shield provides a matching 2×8 IDC connector for a clean, re...

SKU: DF-DFR0646-R | Brand: DFRobot

An 8-digit red LED segment display module with Gravity I2C interface. This module can display numbers, basic characters, and supports 16 levels of brightness adjustment — ideal for clocks, counters, dashboards, and da...

SKU: EF-EF04058 | Brand: ElecFreaks

A common cathode alphanumeric LED display module driven by the HT16K33 chip over I2C. The 0.56-inch digit height makes it suitable for displaying letters, numbers, and basic symbols in electronics projects and interac...

SKU: AF-4311 | Brand: Adafruit

A vibrant 2.0" IPS TFT display breakout with 320×240 resolution and full-colour output, driven by the ST7789 controller. The IPS panel delivers vivid colour reproduction and wide viewing angles — a significant upgrade...

SKU: AF-1001 | Brand: Adafruit

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal...

SKU: AF-1427 | Brand: Adafruit

The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, ...

SKU: AF-2157 | Brand: Adafruit

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright alphanumeric display that shows letters and numbers in a beaut...

SKU: AF-2153 | Brand: Adafruit

Add clear, bright alphanumeric readouts to your next project with this pair of white 14-segment LED displays. Each 0.54" digit can show any letter, number, or symbol — perfect for building clocks, scoreboards, custom ...

SKU: SF-BOB-09110 | Brand: SparkFun

This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and includes 4 mounting holes in the corners.

SKU: AF-2948 | Brand: Adafruit

The Adafruit LED Charlieplexed Matrix is a 9×16 grid of yellow LEDs arranged in a Charlieplexed configuration. Designed to pair with the IS31FL3731 LED matrix driver, this display lets you create scrolling text, anima...

SKU: SF-COM-11442 | Brand: SparkFun

The SparkFun 7-Segment Serial Display combines a 4-digit 7-segment LED display with an ATmega328 microcontroller, allowing you to control every segment using just a few serial lines. It supports three communication in...

SKU: AF-292 | Brand: Adafruit

LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons ...