Displays & User Interface

SKU: LB-LR0214-33 | Brand: Little Bird

Add a clear numeric readout to your next microcontroller project with this simple 4-digit LED display module. It is suited to showing counters, timers, scores and sensor values without needing lots of I/O pins.The mod...

SKU: EC-CMS01101D | Brand: Elecrow

A 10.1" IPS capacitive touchscreen with 1280 × 800 resolution and a distinctive RGB light strip on the back featuring 27 individually addressable LEDs with 19 animated lighting modes. Compatible with Raspberry Pi 3/3B...

SKU: DF-DFR0154 | Brand: DFRobot

A 20×4 character I2C LCD display module compatible with Arduino and other microcontrollers. It shows white characters on a blue backlit background, and the I2C interface means you only need two data pins (SDA and SCL)...

SKU: WS-22224 | Brand: Waveshare

A sleek 1.47-inch IPS LCD display module with rounded corners, 172×320 resolution, and 262K RGB colours. The ST7789V3 driver communicates via a 4-wire SPI bus, minimising IO pin usage while delivering clear, colourful...

SKU: PR-PIM580 | Brand: Little Bird

The Pico Display Pack 2.0 is a 2.0" IPS LCD add-on that attaches to the back of your Raspberry Pi Pico. With an 18-bit capable 320×240 pixel display, four tactile buttons, and an RGB LED, it turns your Pico into a com...

SKU: EC-DIS07050H | Brand: Elecrow

CrowPanel ESP32 Display 5.0-inch module is a powerful HMI capacitive touch screen with a 800*480 resolution LCD display. It uses the ESP32-S3-WROOM-1-N4R8 module as the main control processor, with a dual-core 32-bit ...

SKU: WS-13992 | Brand: Waveshare

A 1.5-inch OLED display module with 128×128 pixel resolution and 16-level greyscale, driven by the SSD1327 controller. Communicates via SPI or I2C interface (selectable via onboard resistor), and operates at both 3.3V...

SKU: PI-PIM725 | Brand: Pimoroni

The Pimoroni Presto is an RP2350-powered desktop companion featuring a 4" square touchscreen IPS display, elegant black aluminium stand, and RGB backlighting. Fully programmable with MicroPython or C/C++, it's designe...

SKU: AF-5778 | Brand: Adafruit

The Adafruit Matrix Portal S3 is the next-generation plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by the ESP32-S3 with built-in WiFi and Bluetooth LE, it plugs directly into the back of any compa...

SKU: WS-14718 | Brand: Waveshare

A 1.8" colour display module designed for the BBC micro:bit, featuring 160 × 128 resolution and 65K colour support. It plugs directly into the micro:bit edge connector — no soldering required. The module includes onb...

SKU: EC-DISSF116P | Brand: Elecrow

An 11.6-inch 1920×1080 IPS touchscreen monitor with HDMI and VGA inputs. The 10-point capacitive touch panel is plug-and-play over USB — no drivers required. Built-in dual speakers, a 3.5mm headphone jack, and a 3.5mm...

SKU: WS-31201 | Brand: Waveshare

ESP32-C6 1.47inch Touch Display Development BoardUnleash your creativity and step into the future of wireless technology with the ESP32-C6 1.47inch Touch Display Development Board. This compact yet powerful developmen...

SKU: PR-PIM773 | Brand: Pimoroni

Our Inky Impression E Ink® displays are super crisp, low power and look great from a variety of viewing angles. They have high pixel density and bright vivid colours, perfect for showing off gorgeous dithered images ...

SKU: WS-25093 | Brand: Waveshare

A 1.5-inch OLED display module with 128×128 resolution and black/white pixels. Built around the SH1107 driver chip with an ultra-narrow bezel, it supports both 4-wire SPI and I2C interfaces and includes an onboard vol...

SKU: EC-DRD60311D | Brand: Elecrow

An 11.6-inch 1920×1080 IPS LED display with HDMI input and a brushed aluminium housing. The full HD resolution and wide 170° viewing angle deliver a clear, vivid picture from almost any position. The display includes ...

SKU: LB-TACTILE-RED | Brand: Little Bird

A 25-pack of red tactile push buttons, perfect for prototyping and project builds. Each button features a removable coloured cap and fits directly into standard breadboards for quick, solder-free connections. Key Fea...

SKU: WS-25512 | Brand: Waveshare

A 1.54-inch OLED display module with 128×64 resolution and white pixels on a black background. Built around the SSD1309 driver chip, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage trans...

SKU: DF-DFR0556 | Brand: DFRobot

A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD...

SKU: DF-DFR0557 | Brand: DFRobot

The Gravity I2C LCD1602 is a 16×2 character LCD display module from DFRobot's Gravity series, redesigned with a clean modern look and simplified I2C interface. It eliminates the need for contrast adjustment, retains b...

SKU: AF-2315 | Brand: Adafruit

The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini cons...