DFRobot

SKU: DF-DFR0676 | Brand: DFRobot

This is an ESP32-integrated 2.13”e-ink display with built-in WiFi and Bluetooth functions that can connect to Alibaba Cloud to achieve remote display control. It supports controlling other devices via its IO ports, wh...

SKU: DF-SEN0335 | Brand: DFRobot

Build up a simple environmental monitor station with this multi-function environment sensor! Based on the combination of CCS811+BME280 chip, this module features high accuracy, I2C interface, and fast Measurement. ...

SKU: DF-FIT0654-1 | Brand: DFRobot

Note: The kits include two pairs of Mecanum wheels (80mm): two left-handed wheels and two right-handed wheels. Please pay attention to the L and R noted on the back of the product when installing,What wheels should yo...

SKU: DF-SER0046 | Brand: DFRobot

A 9g micro servo with an extended 270° rotation range, metal gears, and built-in analog feedback (0–3.3V). The wider rotation range makes it suitable for applications requiring more travel than a standard 180° servo, ...

SKU: DF-DFR0566 | Brand: DFRobot

An I/O expansion HAT for Raspberry Pi 4B and 3B+ that breaks out all GPIO pins into clearly labelled digital, analogue, PWM, I2C, UART, SPI, and I2S interfaces. The board is compatible with DFRobot Gravity series sens...

SKU: DF-TEL0124 | Brand: DFRobot

The SIM7600CE-T 4G(LTE) Shield is a compact 4G/3G/2G communication and GNSS positioning module in an Arduino-compatible shield form factor. About the size of a credit card, it plugs directly into Arduino UNO, Leonardo...

SKU: DF-ROB0150 | Brand: DFRobot

This board can be a cool clock, a timer, a Lucky Turntable Game, a wearable ornament, and an interactive colored pendant. With a micro:bit main board, this 24 RGB LEDs circular expansion boar...

SKU: DF-DFR0555 | Brand: DFRobot

The Gravity I2C LCD1602 is a 16×2 character LCD display module with a blue backlight and white text. It communicates over I2C, requiring only two data pins instead of the many parallel connections of a traditional LCD...

SKU: DF-FIT0079 | Brand: DFRobot

A simple 4-cell AA battery holder in a square (2×2) configuration. Features 5-inch tinned leads for easy soldering into your project. Provides 6V nominal output with four AA alkaline batteries, or 4.8V with rechargeab...

SKU: DF-SEN0161-V2 | Brand: DFRobot

The Gravity Analog pH Sensor/Meter Kit V2 is designed to measure the pH of liquids, indicating acidity or alkalinity on a scale of 0–14. It's commonly used in aquaponics, aquaculture, hydroponics, and environmental wa...

SKU: DF-FIT0520 | Brand: DFRobot

A 6V brushed DC motor with a 20:1 metal gearbox and an integrated quadrature encoder. The encoder provides 11 counts per revolution of the motor shaft, corresponding to 224.4 counts per revolution of the gearbox outpu...

SKU: DF-DFR0521 | Brand: DFRobot

The micro:bit Expansion Board for Boson is a carry-on board that connects to the BBC micro:bit via edge connector, replacing crocodile clips with six keyed 3-pin sockets. It is compatible with DFRobot's Boson and Grav...

SKU: DF-FIT0043 | Brand: DFRobot

The second version of the 9V to Barrel Jack Adapter, now featuring a hard plastic battery snap for easier connection and disconnection. Plug a 9V battery into one end and connect the other to any device with a 5.5 × 2...

SKU: DF-SEN0133 | Brand: DFRobot

This is an Arduino hydrogen gas sensor. It has high sensitivity to Hydrogen (H2) and less sensitivity to alcohol, LPG,cooking fumes . Hydrogen gas is highly flammable and will burn in air at a very wide range...

SKU: DF-DFR0201 | Brand: DFRobot

The Arduino Leonardo is a microcontroller board based on the ATmega32U4, offering the same flash, RAM, and capabilities as the ATmega328 found in the Uno. The key difference is built-in USB communication, allowing the...

SKU: DF-FIT0225 | Brand: DFRobot

A comprehensive mounting kit containing a variety of M3 nylon and copper standoffs, screws, and nuts — all organised in an adjustable 24-compartment parts box. Everything you need to mount circuit boards, build robot ...

SKU: DF-DFR0208 | Brand: DFRobot

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour. It is designed to charge single-cel...

SKU: DF-FIT0317 | Brand: DFRobot

This DVI to HDMI converter is a convenient module for those using Embedded boards and testing on old monitors, It can be used just fine with other monitors or graphic cards as well. SPECIFICATIONS DV...

SKU: DF-DRI0023 | Brand: DFRobot

INTRODUCTION Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain......? As we all know, regular stepper motors are hard to dri...

SKU: DF-DFR0024 | Brand: DFRobot

While there are many types of temperature sensors available in the market, the DS18B20 arduino Temperature Sensor form DALLAS is the best choice in applications which require high accuracy and high reliability. It...