DFRobot

SKU: DF-TEL0150 | Brand: DFRobot

##Introduction This is a CAN-to-UART and USB 1.0 communication module that is compatible with both 3.3V and 5V. It supports the CAN 2.0 protocol and incorporates the SLCAN command, eliminating the need for you to conc...

SKU: DF-SEN0098-V2 | Brand: DFRobot

##Introduction This is an updated version. Retired Product: Gravity: Analog 50A Current Sensor (AC/DC) V1Get this low-power current sensor to monitor your project every second for saving energy or protecting the circu...

SKU: DF-SEN0617 | Brand: DFRobot

The Gravity BME688 is an advanced MEMS environmental sensor from Bosch that measures temperature, humidity, barometric pressure, and volatile organic compounds (VOC) in a single compact module. It supports both I²C an...

SKU: DF-SEN0616 | Brand: DFRobot

The Gravity: Thin-film Pressure Sensor measures pressure through the deformation of a flexible film material. As pressure increases, the film deforms, producing higher analog output values, while lighter pressure resu...

SKU: DF-SEN0560 | Brand: DFRobot

This ultrasonic time-of-flight (ToF) material detection sensor identifies surface materials by analysing the difference in ultrasonic echo energy reflected from various surfaces. It can distinguish between hard and so...

SKU: DF-SEN0578 | Brand: DFRobot

This 2D single-line pulsed time-of-flight (ToF) LiDAR can realize the scanning measurement of the environmental profile within 270 degrees of the horizontal plane, with a precision of 2cm within a detection range of 0...

SKU: DF-TEM2022C-EN-1 | Brand: DFRobot

The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil mo...

SKU: DF-TEM2022A-EN-1 | Brand: DFRobot

We're excited to bring you three EEDU kits designed to make it easy for you to get started with AI, IoT, and environmental sensing using programming hardware. Each kit is built around an Arduino-compatible, ESP32-base...

SKU: DF-SEN0554 | Brand: DFRobot

This non-contact turbidity sensor detects water quality by measuring the level of turbidity. Based on the optics principle, it is capable of detecting the light transmittance and scattering rate of the liquid in trans...

SKU: DF-SEN0519 | Brand: DFRobot

The DFRobot URM15 is an industrial-grade ultrasonic ranging sensor with an IP65-rated waterproof probe. It provides an effective measuring range of 30–500 cm (tested against a flat wall) and communicates via an RS485 ...

SKU: DF-SEN0542 | Brand: DFRobot

This fully integrated capacitive fingerprint sensor provides an efficient way for users to capture, process, store, and match fingerprints. Based on high-performance processor & semiconductor fingerprint sensor, it's ...

SKU: DF-SEN0545 | Brand: DFRobot

This smart rain sensor offers a fast way to detect rainfall change on glass in real-time free from effects like sunlight, dust, leaves, etc., and feeds back information (no rain, light rain, moderate rain, or heavy ra...

SKU: DF-SEN0151 | Brand: DFRobot

Ultrasonic sensors emit ultrasonic pulses, and by measuring the time of ultrasonic pulse reaches the object and back to the transducer, the distance of sensor from the target object is calculated. They are widely used...

SKU: DF-SEN0473 | Brand: DFRobot

This is a sensor that detects hydrogen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ...

SKU: DF-SEN0517 | Brand: DFRobot

This barometric pressure temperature sensor is equipped with TDK's newly-launched ICP-10111 barometric pressure sensor, which is based on MEMS capacitor technology to achieve ultra-low power consumption, industry-lead...

SKU: DF-SEN0471 | Brand: DFRobot

This is a sensor that detects nitrogen dioxide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentra...

SKU: DF-SEN0516 | Brand: DFRobot

This barometric pressure temperature sensor is equipped with TDK's newly launched ICP-10111 barometric pressure sensor, which is based on MEMS capacitor technology to achieve ultra-low power consumption, industry-lead...

SKU: DF-SEN0474 | Brand: DFRobot

This is a sensor that detects hydrogen chloride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentr...

SKU: DF-SEN0468 | Brand: DFRobot

This is a sensor that detects chlorine concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ...

SKU: DF-SEN0472 | Brand: DFRobot

This is a sensor that detects ozone concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ozo...