DFRobot
Shop DFRobot products at Little Bird Electronics, your Australian source for this trusted maker brand. From the Gravity sensor range to FireBeetle IoT boards, DFRobot delivers reliable modules, displays, motors, and converters for every project.
Ideal for STEM education, robotics, Arduino and Raspberry Pi builds, and professional prototyping. Shipped from Australia with local support for hobbyists, educators, and engineers alike.
Gravity: LTC4316 I2C Address Shifter - I2C Conflict Resolver for Arduino & Raspberry Pi
SKU: DF-DFR1193 | Brand: DFRobot
The Gravity LTC4316 I2C Address Shifter resolves I2C address conflicts, allowing multiple sensors with the same address to operate on a single bus. Insert this module between your microcontroller and sensor – address ...
Delivered by Fri 14 Aug
TFS20-L ToF LiDAR Sensor (20m, Sunlight Resistant, 1.35g)
SKU: DF-SEN0672 | Brand: DFRobot
The Benewake TFS20-L is an ultra-compact ToF LiDAR sensor weighing just 1.35g. With 20m range, centimetre-level accuracy, and 100K LUX sunlight resistance, it's designed for drones, robots, and space-constrained appli...
Delivered by Fri 14 Aug
Gravity: GP8512: 1-Channel 15bit I2C to 0-2.5V/VCC DAC Module
SKU: DF-DFR1035 | Brand: DFRobot
##Introduction This is a 1-channel analog voltage output DAC module with I2C communication, 15-bit resolution, and 0.01% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32...
Delivered by Fri 14 Aug
Gravity: GP8503 2-Channel 12bit I2C to 0-2.5V/VCC DAC Module
SKU: DF-DFR1034 | Brand: DFRobot
##Introduction This is a 2-channel analog voltage output DAC module with I2C communication, 12-bit resolution, and 0.1% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32,...
Delivered by Fri 14 Aug
2x3A DC Motor Driver Carrier Board for UNIHIKER M10
SKU: DF-DFR1136 | Brand: DFRobot
This DFRobot motor driver carrier board is purpose-built for the UNIHIKER M10, featuring a tilted edge connector slot that positions the screen at an optimal viewing angle. It integrates a dual 3 A DC motor driver wit...
Delivered by Fri 14 Aug
Gravity: GR10-30 Gesture Sensor (UART & I2C, 12 Gestures, 0~30cm)
SKU: DF-SEN0561 | Brand: DFRobot
This GR10-30 gesture sensor is capable of recognizing 12 hand gestures: move up, down, left, right, forward, backward, rotate clockwise and counterclockwise, rotate clockwise and counterclockwise continuously, hover, ...
Delivered by Fri 14 Aug
Hackster & DFRobot EEDU Enviromental Sensor Kit (ESP32)
SKU: DF-TEM2022C-EN-1 | Brand: DFRobot
The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil mo...
Delivered by Fri 14 Aug
Hackster and DFRobot AI Starter EEDU Kit
SKU: DF-TEM2022A-EN-1 | Brand: DFRobot
We're excited to bring you three EEDU kits designed to make it easy for you to get started with AI, IoT, and environmental sensing using programming hardware. Each kit is built around an Arduino-compatible, ESP32-base...
Delivered by Fri 14 Aug
4.7" E-ink Screen for ESP32
SKU: DF-DFR0835 | Brand: DFRobot
This 4.7" e-ink display board integrates an ESP32-WROVER-E module (ESP32-D0WDQ6 V3) with 16MB Flash and 8MB PSRAM, providing a complete development platform for low-power e-ink projects. The display supports 16 graysc...
Delivered by Fri 14 Aug
Realtek Ameba-RTL8195AM WiFi NFC Module wireless remote control/ telecontrol: Gravity: 315MHz RF Receiver Module
SKU: DF-DFR0477 | Brand: DFRobot
The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and Micr...
Delivered by Fri 14 Aug
FireBeetle ESP8266 IOT Microcontroller (Supports Wi-Fi)
SKU: DF-DFR0489 | Brand: DFRobot
DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit MCU, 10-bit ADC an...
Delivered by Wed 5 Aug
DFRobot Fermion BLE Sensor Beacon Pack - 5 Pack
SKU: DF-TEL0168 | Brand: DFRobot
Turn regular 3.3V sensors into wireless BLE sensor nodes with this 5 pack of Fermion BLE Sensor Beacons from DFRobot. Each beacon broadcasts data using Bluetooth Low Energy, so nearby BLE-capable devices such as smart...
Delivered by Fri 14 Aug
DFRobot DFR1195 ESP32-S3 LoRaWAN Dev Board with Display
SKU: DF-DFR1195 | Brand: DFRobot
This ESP32-S3 development board is built for long-range IoT prototyping using LoRa, LoRaWAN and Meshtastic. It can be used for one-to-one LoRa links, one-to-many LoRa communication, standard LoRaWAN networks, or Mesht...
Delivered by Fri 14 Aug
DFRobot Fermion BMI323 6DOF IMU Sensor
SKU: DF-SEN0693 | Brand: DFRobot
Built around the Bosch BMI323, this compact Fermion module combines a 3-axis accelerometer and a 3-axis gyroscope on a 16 mm × 16 mm board. It provides high-rate acceleration and angular velocity data over I²C for emb...
Delivered by Fri 14 Aug
Maixduino AI Development Kit K210 RISC-V AI + lOT ESP32
SKU: DF-KIT0157 | Brand: DFRobot
The Maixduino AI Development Kit combines the Kendryte K210 RISC-V dual-core AI processor with an ESP32 module for Wi-Fi and Bluetooth connectivity, all in an Arduino UNO-compatible form factor. The K210 features a bu...
Out of stock
Maixduino AI Development Board(OV2640)K210 RISC-V AI+lOT ESP32
SKU: DF-DFR0640 | Brand: DFRobot
Based on Kendryte K210 RISC-V AI processor, Maixduiono AI development board comes with MI AI module and ESP32 module for WiFi and Bluetooth connectivity in Arduino UNO form factor. K210 comes with dual-core process...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared