DFRobot

SKU: DF-DFR0198 | Brand: DFRobot

This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PV...

SKU: DF-DFR0836 | Brand: DFRobot

Note: The product not inclueded Raspberry Pi Pico. This IO expansion board brings out all IO pins of the Raspberry Pi Pico onto male and female connectors. All pins are clearly labeled to allow beginners to quick...

SKU: DF-DFR0478 | Brand: DFRobot

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. FireBeetle Board - ESP32 integrates a Dual-Core ESP-WROOM-32 module, which suppo...

SKU: DF-KIT0021 | Brand: DFRobot

A waterproof DS18B20 digital temperature sensor kit with everything you need to connect to an Arduino. The stainless steel probe measures temperatures from -55°C to +125°C over a 1-Wire interface, requiring just one d...

SKU: DF-DFR0868 | Brand: DFRobot

The Beetle ESP32-C3 is a coin-sized IoT development board based on the ESP32-C3 RISC-V 32-bit single-core processor. Measuring just 25 × 20.5 mm, it breaks out up to 13 GPIO pins and integrates lithium battery chargin...

SKU: DF-DFR0762 | Brand: DFRobot

Specially designed for FireBeetle 2 series (M0, ESP32-E), this Gravity IO expansion shield offers various ports including digital, analog, I2C, UART, SPI, etc. Also, it comes with power input socket for connecting ext...

SKU: DF-DFR1145 | Brand: DFRobot

The FireBeetle 2 ESP32-S3 (N4) is a main control board based on the Espressif ESP32-S3-WROOM-1-N4 module. It features a 32-bit dual-core processor, 4M FLASH memory, and supports WiFi and Bluetooth 5.0 communication. T...

SKU: DF-DFR0996 | Brand: DFRobot

A Magnetic latching relay is a new type of relay.  It features low power dissipation and noiseless.  Unlike other non-latching relay, the latching relay needs two digital pulse signal to switch ON/OFF state....

SKU: DF-SEN0448 | Brand: DFRobot

A 4-wire slot-type photoelectric switch with integrated optical transmitter and receiver. The 5mm detection slot can detect objects passing through, including transparent materials, making it ideal for counting, posit...

SKU: DF-DFR0828 | Brand: DFRobot

When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi code corresponding to the related GPIOs, which is ...

SKU: DF-SEN0216 | Brand: DFRobot

The Water Flow sensor measures the rate of a liquid flowing through it. The YF-S401 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to det...

SKU: DF-DFR0994 | Brand: DFRobot

Romeo ESP32-S3 is a high-performance development board specifically designed forrobotics projects. It utilizes the ESP32-S3 microcontroller and is equipped with an onboard camera that enables video transmission and...

SKU: DF-DFR0126 | Brand: DFRobot

This Audio Analyzer module features the MSGEQ7 graphic equalizer display filter.It will give your arduino ears. Sound is broken down into seven frequency bands and the peak level for each band can be read. The seven ...

SKU: DF-DFR0489 | Brand: DFRobot

DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit MCU, 10-bit ADC an...

SKU: DF-KIT0020 | Brand: DFRobot

An Ultrasonic sensor with scan capability is a must have feature for most robot application. This Ultrasonic scanner kit provides a cost effective way to have such feature for your robot application. This kit is...

SKU: DF-SEN0001 | Brand: DFRobot

URM37 V4.0 Arduino Ultrasonic Sensor comes with temperature compensation which provides better distance measurement accuracy. It is very unique feature in the industry. URM37 V4.0 Arduino Ultrasonic Sensor offers ...