DFRobot
Shop DFRobot products at Little Bird Electronics, your Australian source for this trusted maker brand. From the Gravity sensor range to FireBeetle IoT boards, DFRobot delivers reliable modules, displays, motors, and converters for every project.
Ideal for STEM education, robotics, Arduino and Raspberry Pi builds, and professional prototyping. Shipped from Australia with local support for hobbyists, educators, and engineers alike.
Fermion: AHT20 Temperature and Humidity Sensor (Breakout)
SKU: DF-SEN0527 | Brand: DFRobot
The Fermion AHT20 is a high-precision, low-cost temperature and humidity sensor breakout from DFRobot. Built around an improved MEMS semiconductor capacitive humidity sensor element, it communicates over a standard I2...
Delivered by Fri 20 Nov
BNO055 Intelligent 9-axis Sensor Module
SKU: DF-SEN0374 | Brand: DFRobot
BNO055 is a new sensor IC for implementing an intelligent 9-axis Absolute Orientation Sensor. It is a System in Package, integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope, a triaxial geomagnetic...
Delivered by Fri 20 Nov
Gravity: Digital 1-to-8 I2C Multiplexer
SKU: DF-DFR0576 | Brand: DFRobot
The Gravity I2C Multiplexer solves address conflicts when you need to connect multiple I²C devices that share the same fixed address. It provides eight independent I²C ports on a single bus, allowing up to eight ident...
Delivered by Fri 20 Nov
Gravity: IO Expansion Motor Driver Shield
SKU: DF-DFR0502 | Brand: DFRobot
Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped with Gravity sensor interface and...
Delivered by Fri 20 Nov
Desoldering Pump
SKU: DF-FIT0216 | Brand: DFRobot
A compact, spring-loaded desoldering pump (solder sucker) for removing solder from PCB joints and through-holes. The ProsKit DP-366D features a double oil-sealed piston for guaranteed leak-free suction and a soft foam...
Delivered by Fri 20 Nov
3mm LED Pack (50 pcs)
SKU: DF-FIT0244 | Brand: DFRobot
A pack of 50 basic 3mm LEDs in five colours — 10 each of red, green, yellow, white, and blue. Handy for prototyping, indicator lights, and Arduino projects. Specifications Forward Voltage – 1.8–2.2V Max Current – ...
Delivered by Fri 20 Nov
Gravity: Digital 5A Relay Module For Arduino
SKU: DF-DFR0017 | Brand: DFRobot
The DFRobot Relay Module is a standard relay used with a controller board to interface external electrical circuits or modules. Some of the most common applications with Arduino are: Home lighting, electrical appli...
Delivered by Fri 20 Nov
Jumper Wires 7.8 F/M (High Quality 30 Pack)
SKU: DF-FIT0365 | Brand: DFRobot
INTRODUCTION Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in length. Each pack comes with 30 jumper wires in a...
Delivered by Fri 20 Nov
Bluno Nano - An Arduino Nano with Bluetooth 4.0
SKU: DF-DFR0296 | Brand: DFRobot
The Bluno Nano combines an Arduino Nano-compatible ATmega328 microcontroller with an integrated TI CC2540 Bluetooth 4.0 (BLE) module in a compact 53 × 19 mm form factor. It enables wireless communication, wireless pro...
Delivered by Fri 20 Nov
Bluno Link - A USB Bluetooth 4.0 (BLE) Dongle
SKU: DF-TEL0087 | Brand: DFRobot
Add bluetooth 4.0 to your PC, Mac directly with this USB BLE-Link. It uses the USB package which is compact and compatible with v2.1 and earlier, and also supports the latest v4.0/Bluetooth Low Energy. Now you coul...
Delivered by Fri 20 Nov
Gravity: Arduino DC Fan Module
SKU: DF-DFR0332 | Brand: DFRobot
Make an air aerial propeller vessel, a cooling system, or spinning machine with this small fan module. It comes with a propeller, a 15,000 rpm motor and cable. Add flavor to your own interesting projects with this ...
Delivered by Fri 20 Nov
Gravity: 360 Degree Rotary Encoder Module
SKU: DF-SEN0502 | Brand: DFRobot
This looks like a potentiometer, but it’s an encoder switch. It is a cascadable 360 ° rotary encoder switch with 20 pulses per revolution, and each pulse corresponds to a detent. There are LED lights set for each dete...
Delivered by Fri 20 Nov
Gravity: Digital Wireless Receive Switch (433MHz)
SKU: DF-TEL0142 | Brand: DFRobot
When building a project that needs to transmit some simple signals wirelessly, have you been bothered by the any of the following problems: Bluetooth's cumbersome AT command configuration and high cost, Wifi's signal ...
Delivered by Fri 20 Nov
DFRobot PCB Engineering Ruler - Mini(6.3inches)
SKU: DF-DWG0014-M | Brand: DFRobot
This is a PCB engineering ruler used daily by DFRobot electronic engineers, the short PCB ruler is only the size of the palm of your hand, making it more delicate and compact, and easy to carry. The information on the...
Delivered by Fri 20 Nov
Patch Test Hook (10 Pack)
SKU: DF-FIT0720 | Brand: DFRobot
These patch test hooks provide a solderless way to make signal and low-current connections between boards, sensors, and modules. The hook clips grab onto pins, pads, and component legs — perfect for prototyping with c...
Delivered by Fri 20 Nov
3xAA Battery Holder
SKU: DF-FIT0610 | Brand: DFRobot
This enclosed battery holder takes 3× AA batteries in series, providing approximately 4.5V from alkaline cells or 3.6V from NiMH/NiCd rechargeables. It features a built-in on/off switch and a sliding, removable cover ...
Delivered by Fri 20 Nov
Incremental Photoelectric Rotary Encoder - 400P/R
SKU: DF-SEN0230 | Brand: DFRobot
This is an industrial incremental photoelectric rotary encoder with aluminum material, metal shell and stainless steel shaft. It generates AB two-phase orthogonal pulse signal though the rotation of the grating dis...
Delivered by Fri 20 Nov
Wheel 42x19mm (Pair)
SKU: DF-FIT0085 | Brand: DFRobot
This custom-designed plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our mini metal gearmotors as well as the Solarbotics metal gear motors. Teeth on...
Delivered by Fri 20 Nov
Triple Axis Accelerometer ADXL345
SKU: DF-SEN0032 | Brand: DFRobot
Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos ...
Delivered by Fri 20 Nov
Gravity: Arduino LPG Gas Sensor (MQ4)
SKU: DF-SEN0129 | Brand: DFRobot
INTRODUCTION This is an Arduino CH4 gas sensor. It uses MQ4 probe which is able to detect nature gas, CH4. It is less sensitivity in detecting alcohol, cooking fumes, and cigarette smok...
Delivered by Fri 20 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared