DFRobot
Shop DFRobot products at Little Bird Electronics, your Australian source for this trusted maker brand. From the Gravity sensor range to FireBeetle IoT boards, DFRobot delivers reliable modules, displays, motors, and converters for every project.
Ideal for STEM education, robotics, Arduino and Raspberry Pi builds, and professional prototyping. Shipped from Australia with local support for hobbyists, educators, and engineers alike.
Arduino UNO R4 Minima Development Board
SKU: DF-DFR1085 | Brand: DFRobot
##Introduction The new Arduino UNO R4 comes in two versions: the UNO R4 WiFi and the UNO R4 Minima. It runs on the Renesas RA4M1 (Arm Cortex®-M4) processor, with a clock speed of 48MHz, which provides a 3x increase ov...
Delivered by Wed 5 Aug
C1001 60GHz mmWave Indoor Fall Detection Sensor for Arduino / ESP32 / micro:bit (11 Meters)
SKU: DF-SEN0623 | Brand: DFRobot
The C1001 mmWave Human Detection Sensor is a high-precision 60GHz millimeter-wave radar sensor engineered for advanced human detection. Unlike standard 24GHz millimeter-wave sensors that are limited to detecting prese...
Delivered by Wed 5 Aug
Gravity: Science Data Acquisition Module Kit for Experiments Education
SKU: DF-EDU0170 | Brand: DFRobot
The Gravity Science Data Acquisition Module Kit is a comprehensive toolkit for conducting digital scientific experiments without programming or electronics knowledge. Built around the DFRobot SCI DAQ module, it includ...
Delivered by Wed 5 Aug
Gravity: ENS160 Air Quality Sensor
SKU: DF-SEN0514 | Brand: DFRobot
This Gravity: ENS160 Air Quality Sensor, based on ScioSense's new ENS160 sensor chip, is specifically designed for indoor air quality monitoring and offers detection of multiple IAQ data (TVOC, eCO2, AQI).The innovati...
Delivered by Wed 5 Aug
Industrial 4-Channel Relay Module
SKU: DF-FIT0827 | Brand: DFRobot
The module adopts the standard Modbus RTU protocol, the communication interface supports RS485 or RS232 and supports communication baud rates of 2400, 4800, 9600, 19200, 38400 (default 9600). Each relay output is inde...
Delivered by Wed 5 Aug
Plastic Project Box Enclosure for Beetle - 1.42 x 1.42 x 0.59 inch
SKU: DF-FIT0726 | Brand: DFRobot
Put on a sturdy and beautiful enclosure for your electronic project!This project box is made from high-quality ABS material, and the surface of the enclosure is sandblasted. There are screws in the package for conveni...
Delivered by Wed 5 Aug
Gravity: I2C LIS331HH Triple Axis Accelerometer Sensor (±6g/±12g/±24g)
SKU: DF-SEN0411 | Brand: DFRobot
The Gravity: LIS331HH is a high-performance 3-axis linear accelerometer with ultra-low power consumption of just 10 µA in low-power mode. It offers user-selectable measurement ranges of ±6g, ±12g, or ±24g and delivers...
Delivered by Wed 5 Aug
Gravity: 5V Non-contact Liquid Level Sensor
SKU: DF-SEN0485 | Brand: DFRobot
This small 5V non-contact liquid level sensor with Gravity Interface is able to detect 0-100°C conductive liquid levels in non-metallic containers in sensing range of 3mm. Provided with digital quantity output(low), t...
Delivered by Wed 5 Aug
8-Channel Isolated Analog Data Acquisition Module
SKU: DF-DFR0853 | Brand: DFRobot
The 8-Channel Isolated Analog Data Acquisition Module is an industrial-grade 12-bit ADC with RS485 communication, designed for reliable multi-channel voltage and current measurement in demanding environments. Each ch...
Delivered by Wed 5 Aug
3-Pin LED Strip Connector Cable-Single Head (5PCS)
SKU: DF-FIT0865 | Brand: DFRobot
A set of five solderless LED strip pigtail cables, each with a snap-down connector on one end for 10 mm wide 3-wire LED strips and a DuPont-style female connector on the other. The 20 cm colour-labelled wires with mar...
Delivered by Wed 5 Aug
Raspberry Pi 4 Metal Case with 3.5" 480x320 TFT Touch Screen
SKU: DF-FIT0820 | Brand: DFRobot
Here comes a case that can hold the Raspberry Pi and the screen together.It consists of a metal case with a frosted tactile feel and a 3.5-inch TFT touch screen.The touch screen has a resolution of 480x320 and a refre...
Delivered by Wed 5 Aug
MindPlus Coding Kit for Arduino
SKU: DF-KIT0152-EN | Brand: DFRobot
MindPlus Coding Kit for Arduino is a set of tools for programming learning. As its compatibility for Mind+, a graphical coding software for starters, and Arduino IDE, this kit is well applicable to students from the l...
Delivered by Wed 5 Aug
Gravity: Speech Synthesis Module(Support English and Chinese)
SKU: DF-DFR0760 | Brand: DFRobot
The Gravity Speech Synthesis Module converts text to spoken audio in English and Chinese, including mixed-language content. It connects via I2C or UART using the standard Gravity interface and includes a built-in spea...
Delivered by Wed 5 Aug
Gravity: WiFi IoT Module
SKU: DF-TEL0126 | Brand: DFRobot
This WiFi IoT module would be an excellent choice for IoT classroom teaching and smart home projects. It supports multiple programming platforms, such as MakeCode, Mind+, and Arduino IDE, and can also be used on vario...
Delivered by Wed 5 Aug
Waterproof Cable Gland PG-7 Size (Black)
SKU: DF-FIT0727 | Brand: DFRobot
Waterproof is always a critical point for outdoor projects, and when you need to drill holes on a project enclosure to lead out the wires, it will be very likely to cause the waterproof problem. Now no more worries, w...
Delivered by Wed 5 Aug
BMP280 Digital Pressure Sensor Module
SKU: DF-SEN0372 | Brand: DFRobot
This is a breakout version of BMP280 Barometric Pressure Sensor from DFRobot with temperature and pressure measurement functions, supporting Arduino code control.Housed in an extremely compact package, the BMP280 is b...
Delivered by Wed 5 Aug
BMP388 Digital Pressure Sensor Module
SKU: DF-SEN0371 | Brand: DFRobot
The BMP388 Digital Pressure Sensor Module is a high-accuracy barometric pressure and temperature breakout based on the Bosch BMP388. It offers significantly improved performance over its predecessors (BMP180, BMP280) ...
Delivered by Wed 5 Aug
Type-C Micro 2-in-1 USB Cable
SKU: DF-FIT0668 | Brand: DFRobot
A versatile 2-in-1 USB cable with both USB-C and Micro USB connectors on one end, so you can charge and program devices with either interface using a single cable. The flat cable design resists tangling, and the inclu...
Delivered by Wed 5 Aug
Gravity: 8-Digital LED Segment Display Module (Red)
SKU: DF-DFR0646-R | Brand: DFRobot
An 8-digit red LED segment display module with Gravity I2C interface. This module can display numbers, basic characters, and supports 16 levels of brightness adjustment — ideal for clocks, counters, dashboards, and da...
Delivered by Wed 5 Aug
micro:IO Extender- a micro:bit IO Expansion Board
SKU: DF-MBT0008 | Brand: DFRobot
The micro:IO Extender is a compact expansion board for the BBC micro:bit that breaks out all 19 I/O pins as Gravity-compatible 3-pin headers. It provides plug-and-play access to the full range of micro:bit GPIO, along...
Delivered by Wed 5 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
