DFRobot
Shop DFRobot products at Little Bird Electronics, your Australian source for this trusted maker brand. From the Gravity sensor range to FireBeetle IoT boards, DFRobot delivers reliable modules, displays, motors, and converters for every project.
Ideal for STEM education, robotics, Arduino and Raspberry Pi builds, and professional prototyping. Shipped from Australia with local support for hobbyists, educators, and engineers alike.
Gravity: Liquid Flow Sensor (G3/4)
SKU: DF-SEN0551 | Brand: DFRobot
This Gravity: liquid flow sensor is designed based on the electromagnetic principle. It adopts O-ring rubber seal and uses silicone sealant at the outlet end to strength water-resistance. With high anti-interference a...
Delivered by Fri 20 Nov
DC 12V/24V Infrared Body Sensor Switch
SKU: DF-SEN0522 | Brand: DFRobot
This human body sensing switch adopts an infrared detection way to control load switch. It offers a detection range of 5~8m, high sensitivity, and reliability. The sensor has an adjustable delay function and the ...
Delivered by Fri 20 Nov
NPN to PNP Signal Converter / Adapter Module
SKU: DF-FIT0850 | Brand: DFRobot
This NPN to PNP signal converter module bridges the gap when your sensor outputs an NPN signal but your controller or PLC expects a PNP input. Simply wire it inline between the sensor and the controller to convert the...
Delivered by Fri 20 Nov
Industrial RS485 Opto-Isolated Hub
SKU: DF-FIT0821 | Brand: DFRobot
A 4-port RS-485 bus hub with optical isolation and surge protection, designed for industrial environments with complex electromagnetic interference. Each port is independently opto-isolated at 2500 V and protected aga...
Delivered by Fri 20 Nov
Fermion: MEMS Microphone Module
SKU: DF-SEN0487 | Brand: DFRobot
This tiny MEMS microphone has an amplifier gain of 66. When there is no sound detected, it outputs voltage around 0.66*VCC. When speaking, you can easily get the acoustic waveform by ADC sampling. The module can be us...
Delivered by Fri 20 Nov
Bass Treble Bluetooth Amplifier-50W*2
SKU: DF-DFR0806 | Brand: DFRobot
With bass and treble tone independent control, this powerful Bluetooth Amplifier has AM interference and filtering function that makes the board THD as low as 0.1% even when working for a long time at large power outp...
Delivered by Fri 20 Nov
4-Pin LED Strip Connector Cable (5PCS)
SKU: DF-FIT0864 | Brand: DFRobot
These solderless 4-pin snap-down connector cables make it easy to bridge a gap between two pieces of cuttable RGB LED strip without soldering. Each cable has a snap-down connector on both ends with a wire in between, ...
Delivered by Fri 20 Nov
Fermion: TCS3430 Tristimulus Color Sensor (Breakout)
SKU: DF-SEN0403 | Brand: DFRobot
DFRobot TCS3430 XYZ Tristimulus Color Sensor employs the new generation of TCS3430 spectral sensor IC launched by the well-known AMS company. It features advanced digital ambient light sensing(ALS) and CIE 1931 tristi...
Delivered by Fri 20 Nov
NEO Case for Raspberry Pi 4B-Sliding Magnetic
SKU: DF-FIT0719 | Brand: DFRobot
This NEO case is designed specifically for the needs and functionality of the Raspberry Pi 4 Model B. Made with aluminum alloy and polished with a modem Space Grey finish for stunning aesthetics.The case acts as passi...
Delivered by Fri 20 Nov
GDL-Line-10CM
SKU: DF-FIT0689 | Brand: DFRobot
This 10 cm FPC flat-flex ribbon cable is designed for use with DFRobot GDI (General Display Interface) displays. The 18-pin reverse-contact cable is durable and resistant to damage even when bent sharply, with insulat...
Delivered by Fri 20 Nov
ICE-Tower Cooling Fan for Raspberry Pi
SKU: DF-FIT0652 | Brand: DFRobot
A tower-style CPU cooler for the Raspberry Pi, combining a 5mm copper heatpipe, multi-layer aluminium heat sinks, and a 7-blade fan to significantly reduce operating temperatures. Under overclocking conditions, it can...
Delivered by Fri 20 Nov
Gravity: Analog SHT30 Temperature Humidity Sensor
SKU: DF-DFR0588 | Brand: DFRobot
Gravity: Analog SHT30 Temperature & Humidity Sensor adopts the new generation SHT30 temperature and humidity sensor from Sensirion. Thanks to Sensirion's CMOSens® technology, highly integrated capacitive humidity sens...
Delivered by Fri 20 Nov
3xAAA Battery Holder
SKU: DF-FIT0626 | Brand: DFRobot
This battery holder connects 3× AAA batteries in series, providing approximately 4.5V from alkaline cells. It features a PH2.0-2P connector, making it compatible with DFRobot boards and other devices that use the PH2....
Delivered by Fri 20 Nov
Raspberry Pi UPS HAT
SKU: DF-DFR0494 | Brand: DFRobot
An uninterruptible power supply HAT for Raspberry Pi that provides steady power during outages, protecting your system from damage and ensuring safe shutdown. Ideal for mobile applications like Raspberry Pi cameras, t...
Delivered by Fri 20 Nov
Rubber Wheel for A4WD and A2WD (Pair)
SKU: DF-FIT0003 | Brand: DFRobot
This wheel is used in our most popular A4WD Mobile Platform and 2WD Arduino Mobile Robot Platform. Mounted directly on micro gear motors. Sold in pair. SPECIFICATIONS Outer Diameter: 65mm(2.6''...
Delivered by Fri 20 Nov
LED Voltage Meter (Blue)
SKU: DF-DFR0130-B | Brand: DFRobot
This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...
Delivered by Fri 20 Nov
Gravity: Digital Green LED Light Module
SKU: DF-DFR0021-G | Brand: DFRobot
This green LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin i...
Delivered by Fri 20 Nov
Gravity: Digital Blue LED Light Module
SKU: DF-DFR0021-B | Brand: DFRobot
This Blue LED light module has a shiny white color. It is ideal for Arduino starters. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal p...
Delivered by Fri 20 Nov
6xAA Battery Holder with DC2.1 Power Jack
SKU: DF-FIT0141 | Brand: DFRobot
A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounti...
Delivered by Fri 20 Nov
Micro Metal Gearmotor Extended Bracket (Pair)
SKU: DF-FIT0160 | Brand: DFRobot
This compact bracket enables convenient mounting of popular micro metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This v...
Delivered by Fri 20 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared