Deals

SKU: LB-LR0085 | Brand: Little Bird

The 0.96″ 128×64 OLED Display Module delivers crisp, high-contrast visuals in a compact 27 × 27 mm package. Driven by the SSD1306 controller over I2C, it requires only two I/O pins and operates across a wide 3.3–5V ra...

SKU: LB-BK-LR0282 | Brand: Little Bird

Description This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set this up as a voltage divider with a resistor of a...

SKU: LB-LS2921 | Brand: Little Bird

Comes as a standard 10K ohm linear potentiometer with 0.1" spacing it works great for  prototyping. It has a nice feel, tweaking it is quite satisfying.These are used on the crack the code shield.1 x Potentiomete...

SKU: LB-OWL-IR | Brand: Little Bird

An infrared receiver module that can read signals from most standard IR remote controls. Useful for adding remote control functionality to Arduino and microcontroller projects. Pair with an IR transmitter module to bu...

SKU: LB-LS0014 | Brand: Little Bird

Check out these big 10mm through-hole LEDs! The clear epoxy package causes these LEDs to have a bright glow. Features: Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1V Forward Current: 20mA Intensity (R/G/B): 550 / 250 /...

SKU: LB-TACTILE-RED | Brand: Little Bird

A 25-pack of red tactile push buttons, perfect for prototyping and project builds. Each button features a removable coloured cap and fits directly into standard breadboards for quick, solder-free connections. Key Fea...

SKU: LB-LS0312 | Brand: Little Bird

This DIY Robot Tank Chassis with built-in Shock absorption the perfect base for your next robotics project. Specifications:  Motor: 260 Voltage: 3V-9V Weight: 550g Track Width: 2.3cm Size: 30cm x 15cm x 7.6cm N...

SKU: SF-SEN-12650 | Brand: SparkFun

The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as a...

SKU: LB-24-REED | Brand: Little Bird

A reed switch is an electrical switch which is operated when a magnetic field is brought near to it.  Check out our tutorial here Digital Output (DO)GND: In electronics, we define a point in a circuit to be a ki...

SKU: MB-12040 | Brand: Makeblock

This encoder motor is capable of driving two DC motors or one encoder motor. It has 16 pins, allowing you to connect with MegaPi by simply plugging in. The motor driver IC on the board is TB6612, which is a high effic...

SKU: EC-ARS03218S | Brand: Elecrow

The board is designed for beginners in Arduino, with various components available that makes you build more than 10 projects easily. You won’t have to solder or connect anything at all, just plug it in a shield and st...

SKU: LB-00312 | Brand: Little Bird

A hands-on guide to building electronic circuits, robots, and cloud-connected devices using littleBits — the snap-together magnetic electronic building blocks. Co-authored by littleBits founder Ayah Bdeir and top-sell...

SKU: SS-101020023 | Brand: Seeed Studio

The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted b...

SKU: TB-BM7134 | Brand: Little Bird

A hands-on project book by Simon Monk featuring 30 practical Arduino-based builds. Each project includes component lists and step-by-step instructions, taking you from basic circuits through to more advanced builds us...

SKU: LB-FINCH-5 | Brand: Little Bird

Bulk pack of 5The Little Bird Finch is our smallest programmable board. The Finch is a tiny little  board designed to add flashy functionality to your project without taking up a lot of room. It has an ...

SKU: FT-OLSH | Brand: Freetronics

Connect the 128x128 pixel OLED module to your Arduino-compatible board for a tiny, handy display with a joystick input and piezo sound output! The module can be plugged in directly on top of the shield, or connecte...

SKU: SF-SEN-12064 | Brand: SparkFun

The HTU21D is a low-cost, easy to use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and data logging and perfect for a weather stations or humidor control sy...

SKU: M5-A042 | Brand: Little Bird

Description NEOFLASH is a RGB LED panel with 192 RGB LED(24x8). When you program this Unit, please pay attention to the sequence of the Neopixels. From top left (Where PIR placed) to right, and top to bottom. Co...

SKU: PL-2508 | Brand: Pololu

This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis’s battery terminals and motors, and the Arduino plugs into ...