Components
Shop electronic components for your next project — from resistors, capacitors and transistors to LEDs, ICs, switches, connectors and more. Whether you're building a circuit from scratch or repairing existing gear, you'll find the discrete parts you need.
Perfect for hobbyists, students, educators and professional engineers across Australia. Stock up on essentials for prototyping, STEM learning kits or production runs, with fast Australian shipping.
Arcade Button - 30mm Translucent Green
SKU: AF-475 | Brand: Adafruit
This 30mm translucent green arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no ...
Delivered by Tue 14 Jul
Standoff - Metal (4-40; 3/8; 10 pack)
SKU: SF-PRT-10739 | Brand: SparkFun
Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below. Note: These are sold as a...
Delivered by Wed 24 Jun
Analog 2-axis Thumb Joystick with Select Button + Breakout Board
SKU: AF-512 | Brand: Adafruit
A PSP/Xbox-style analog thumb joystick with a built-in press-to-select button, mounted on a breakout board designed for easy panel mounting. Unlike simple directional joysticks, this analog stick provides precise, pro...
Delivered by Tue 14 Jul
Adafruit TFT 50pin to 40pin + AR1100 Touchscreen Adapter
SKU: AF-3305 | Brand: Adafruit
The Adafruit TFT 50-Pin to 40-Pin + AR1100 Touchscreen Adapter converts Adafruit RTD266X driver boards with 50-pin TFT connectors to work with 40-pin TFT displays. It also includes a built-in AR1100 resistive touch co...
Delivered by Tue 14 Jul
SparkFun LED Driver Breakout - TLC5940 (16 Channel)
SKU: SF-BOB-10616 | Brand: SparkFun
The TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface. This breakout board is a good way to take full advantage of thi...
Delivered by Fri 3 Jul
Red Electroluminescent (EL) Tape Strip - 100cm w/two connectors
SKU: AF-445 | Brand: Adafruit
EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The othe...
Delivered by Tue 14 Jul
BNC Connector - Right Angle
SKU: SF-PRT-10550 | Brand: SparkFun
BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut. Documents: Dimensional Drawing
Delivered by Fri 3 Jul
DotStar Micro LEDs (APA102–2020) - Smart SMD RGB LED - 10 pack
SKU: AF-3341 | Brand: Adafruit
These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They're mini versions of the ones in our digital DotStart strips and matrices wi...
Delivered by Tue 14 Jul
Interface Cable - SMA Female to SMA Male (25cm)
SKU: SF-WRL-12861 | Brand: SparkFun
This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough...
Delivered by Fri 3 Jul
2x40 Right Angle Edge Connector for micro:bit
SKU: AF-3342 | Brand: Adafruit
This 2×40 right-angle edge connector fits directly onto the bottom edge contacts of the BBC micro:bit, providing access to all GPIO pins, power, and ground connections. The right-angle design is ideal for mounting on ...
Delivered by Tue 14 Jul
Standoffs Plastic - (4-40; 3/4; 10 pack)
SKU: SF-PRT-10462 | Brand: SparkFun
Nylon standoffs for mounting PCBs in enclosures or elevating boards off work surfaces. These ¾" (19mm) long standoffs are tapped for 4-40 screws and sold in a pack of 10. Key Features Nylon Construction – Non-condu...
Delivered by Fri 3 Jul
Screw - Phillips Head (1/4, 4-40, 10 pack)
SKU: SF-PRT-10453 | Brand: SparkFun
There are your standard Philips-head 4-40 screws. They are ¼" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.
Delivered by Fri 3 Jul
MCP23008 - i2c 8 input/output port expander
SKU: AF-593 | Brand: Adafruit
The MCP23008 is an I2C 8-bit I/O port expander that adds 8 general-purpose pins to your microcontroller using just two I2C lines (shared with other I2C devices). Each pin can be configured as input, output, or input w...
Delivered by Tue 14 Jul
16 MHz Ceramic Resonator / Oscillator
SKU: AF-1873 | Brand: Adafruit
A 16 MHz ceramic resonator with built-in load capacitors, providing a simple clock source for microcontrollers. The 3-pin package has 0.1" (2.54 mm) pin spacing for direct breadboard use — connect the two outer pins t...
Delivered by Tue 14 Jul
Metal Ball Tactile Button (6mm) x 10 pack
SKU: AF-3347 | Brand: Adafruit
A pack of 10 tactile push buttons with a polished metal ball actuator, giving them a distinctive industrial look. The rounded top also makes them forgiving when pressed at an angle — useful for mechanical actuator set...
Delivered by Tue 14 Jul
Header - 2x23-pin Male (PTH, 0.1)
SKU: SF-PRT-12791 | Brand: SparkFun
This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each oth...
Delivered by Wed 24 Jun
Panel Mount 2.1mm DC barrel jack
SKU: AF-610 | Brand: Adafruit
A panel-mount DC barrel jack that accepts standard 2.1 mm power plugs. The extra-long threaded body fits panels up to 8 mm thick (5/16″), making it suitable for wooden enclosures and thicker project boxes — not just s...
Delivered by Tue 14 Jul
2.5mm DIY Stereo Plug Connector
SKU: AF-1798 | Brand: Adafruit
A 2.5mm stereo (TRS) plug connector for building or repairing custom audio cables. The durable metal construction and flexible spring strain relief ensure a long-lasting, professional result. The 2.5mm plug is a less...
Delivered by Tue 14 Jul
3.5mm (1/8) DIY 4-Pole (TRRS) Plug
SKU: AF-1799 | Brand: Adafruit
A solder-on 3.5 mm (1/8") TRRS plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to the four c...
Delivered by Tue 14 Jul
Jumper Wire - 0.1, 5-pin, 6
SKU: SF-PRT-10370 | Brand: SparkFun
This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway header...
Delivered by Fri 3 Jul
