Components

SKU: TB-PI6504 | Brand: Little Bird

A 20-pin DIP IC socket for through-hole mounting. Using sockets allows you to easily remove or replace integrated circuits without desoldering – essential for prototyping, testing, or servicing equipment. These low-c...

SKU: PL-2749 | Brand: Pololu

A 2×20-pin stackable female header designed for the Raspberry Pi GPIO. The extended pins allow HATs and add-on boards to be stacked while still providing access to all 40 GPIO pins for additional connections. This ve...

SKU: LB-LR0122 | Brand: Little Bird

This module consists of 64 LEDs with MAX7219 driver chip. It can control 64 LEDs by 16-bit data serial input and output. If you want to control it, you only need to control three IO ports. It support for cascading mul...

SKU: LB-LR0280-100-G | Brand: Little Bird

A bulk pack of 100 green 10mm through-hole LEDs with a diffused lens. The opaque epoxy package produces a soft, even glow rather than a harsh point of light. Key Features Diffused Lens – Soft, even glow with wide l...

SKU: LB-LR0280-100-B | Brand: Little Bird

A bulk pack of 100 blue 10mm through-hole LEDs with a diffused lens. The opaque epoxy package produces a soft, even glow rather than a harsh point of light. Key Features Diffused Lens – Soft, even glow with wide li...

SKU: LB-LR0280-100 | Brand: Little Bird

A bulk pack of 100 red 10mm through-hole LEDs with a diffused lens. The opaque epoxy package produces a soft, even glow rather than a harsh point of light. Key Features Diffused Lens – Soft, even glow with wide lig...

SKU: DF-FIT0914 | Brand: DFRobot

A 10-pack of PH2.0-4P male-to-male cables for connecting Boson modules, UNIHIKER boards, and other modular electronics. The polarised 4-pin connectors ensure correct orientation and prevent reverse insertion. Key Fea...

SKU: AF-6428 | Brand: Adafruit

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They are just mind-bogglingly small - 2mm square. As they are pretty darn tiny, they mig...

SKU: SF-COM-27883 | Brand: SparkFun

The ENS22S001 is a high-quality mechanical rotary encoder from Cooka, offering 64 pulses per revolution with standard quadrature (A/B) output. Fully sealed and rated IP65, it's built for reliable operation in harsh en...

SKU: SF-COM-27884 | Brand: SparkFun

The CS19D128B is a high-quality magnetic rotary encoder from Cooka, offering smooth, low-friction rotation with 128 pulses per revolution and no detent positions. Pressing the shaft activates a built-in push switch. ...

SKU: SF-PRT-28335 | Brand: SparkFun

We really like the 5-way switch on the Qwiic Navigation Switch but its size makes it a little difficult to reach and use so we designed this set of five covers to remedy that. The SparkFun Navigation Switch Cover...

SKU: SF-COM-27247 | Brand: SparkFun

A compact through-hole speaker that solders directly to your PCB. When you need better audio quality than a piezo buzzer but don't have room for a full-sized speaker, this 30mm unit hits the sweet spot – clear enough ...

SKU: SF-KIT-27842 | Brand: SparkFun

  Every electronics hobbyist, from beginner to expert, needs a well-stocked "bubble gum" parts bin. The SparkFun Beginner Parts Kit is the perfect solution, providing a curated collection of the most essential th...

SKU: SF-BOB-29094 | Brand: SparkFun

A breakout board for the Panasonic EVQWGD001 roller wheel encoder with press-to-select switch. This tactile input device combines a scrolling wheel with a push button in a compact form factor – similar to the scroll w...

SKU: EF-EF05049 | Brand: ElecFreaks

A pack of five RJ11 modular cables with 4P4C (4-position, 4-contact) connectors on each end. Each cable is 200 mm long and provides a four-wire straight-through connection, suitable for connecting sensors and modules ...

SKU: AF-6191 | Brand: Adafruit

A warm-white LED filament shaped as the letter "A", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6192 | Brand: Adafruit

A warm-white LED filament shaped as the letter "B", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6194 | Brand: Adafruit

A warm-white LED filament shaped as the letter "D", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6195 | Brand: Adafruit

A warm-white LED filament shaped as the letter "E", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6196 | Brand: Adafruit

A warm-white LED filament shaped as the letter "F", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...