Components

SKU: AF-4548 | Brand: Adafruit

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone Neon-Like LED Strips! They look a lot like neon, but without the need for...

SKU: AF-4510 | Brand: Adafruit

Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Socket to Terminal Spring Block Adapter. You get a nice solid PCB with a DE-9 socket and one line of push-terminal blocks. Just flick up the...

SKU: AF-4537 | Brand: Adafruit

Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing for Feather M4 enables 8 concurrent DMA NeoPixel strands from a single Feather M4, with up to 1,750 RGB pixels per strand (14,00...

SKU: SF-PRT-16891 | Brand: SparkFun

This surface-mount 50-pin board-to-board connector with 0.5 mm pitch and double-slot male configuration is used on Alchitry FPGA boards. Soldered to the underside of a board, these connectors allow Alchitry FPGA board...

SKU: SF-PRT-16890 | Brand: SparkFun

These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the to...

SKU: EC-ACC00170A | Brand: Elecrow

This HDMI connector is specially designed for CrowPi with Raspberry Pi 4B. If you want to upgrade your Crowpi to Raspberry Pi 4B, It is necessary to as a connector.

SKU: SF-COM-16346 | Brand: SparkFun

The WS2812B (or "NeoPixel") may look like a common 5050-sized (5x5mm) SMD LED, but there’s actually an integrated control circuit embedded inside there too. Sometimes you don't need 10, maybe you need 50! If you are t...

SKU: SF-PRT-16538 | Brand: SparkFun

Poke Home Connectors have been featured on a number of our boards over the last few years by providing a simple screw-terminal-type connector for easy wire connection purposes. Similar to screw terminals, Poke Home Co...

SKU: SF-COM-16347 | Brand: SparkFun

The WS2812B (or "NeoPixel") may look like a common 5050-sized (5x5mm) SMD LED, but there’s actually an integrated control circuit embedded inside there too. Sometimes you don't need 10 or even 50, maybe you need a who...

SKU: SF-PRT-15900 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: SF-PRT-15899 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: SF-PRT-15898 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 2-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: AF-4492 | Brand: Adafruit

Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. This tiny 1515 (1.5mm x 1.5mm) RGB LED is designed to be surface-mount soldered and is the most compact w...

SKU: SF-BOB-15932 | Brand: SparkFun

The SparkFun Qwiic Button simplifies adding a tactile button to your I2C project. It handles debouncing, pull-up resistors, and polling internally, so you can focus on your application. A built-in red LED provides vis...

SKU: EF-EF03425 | Brand: ElecFreaks

Ring:bit car V2 lights-bar module is the dedicated module which designed for Ring:Bit Car V2. It brings you beautiful mutiple color with simple assemble.Come with 8 Rainbow full color LEDs. You can update your ring:bi...

SKU: EF-EF04056 | Brand: ElecFreaks

The Octopus 0.36" Segment LED Brick is a compact 7-segment display module designed for simple numeric output. It features a 0.36-inch common anode LED display capable of showing digits 0–9 and decimal points. Operati...

SKU: EF-EF04009 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...

SKU: EF-EF04057 | Brand: ElecFreaks

OCTOPUS 056C Segmentric is a type of common cathode digital tube display module based on HT16K33 drive, using a standard I2C communication interface. The  module using 0.56 inches common cathode digital tube w...

SKU: EF-EF10108 | Brand: ElecFreaks

This is a long flexible orange cable. It is called EL wire or electroluminescent wire. Once being charged with appropriate voltage, it can emit bright orangelight and the wire will not be heated. It is similar to a lo...

SKU: EF-EF10119 | Brand: ElecFreaks

This is a long flexible white cable. It is called EL wire or electroluminescent wire. Once being charged with appropriate voltage, it can emit bright whitelight and the wire will not be heated. It is similar to a long...