Components

SKU: PI-PIM728 | Brand: Pimoroni

Add smart light and sound effects to models and dioramas with this small-but-mighty RP2040-powered programmable controller board - now with wireless connectivity!Tiny FX W is an effects controller for the LED dots and...

SKU: AF-6027 | Brand: Adafruit

The Adafruit DS2482S-800 is an 8-channel I2C-to-1-Wire bus adapter on a STEMMA QT breakout board. It allows any I2C-capable microcontroller or single-board computer to communicate with 1-Wire devices — most commonly D...

SKU: AF-6019 | Brand: Adafruit

DescriptionThis accessory simplifies wiring sensors to your Bus Pirate 5, featuring snap-open quick connects that easily plug into the BP5’s header port. When you’re ready to dive into a project, these quick connecto...

SKU: AF-6020 | Brand: Adafruit

DescriptionElevate your Bus Pirate 5 experience with this premium accessory. This keyed and locking probe cable, crafted from soft and flexible silicone-coated wire, connects seamlessly to the Bus Pirate's 10-pin mai...

SKU: AF-6021 | Brand: Adafruit

The Bus Pirate 5 SOIC/SOP8 SPI Flash Adapter makes it easy to program bare SPI flash memory chips without clips or soldering. The spring-loaded ZIF socket accepts SOP8 packages in both 150 mil and 208 mil widths — the...

SKU: ATTINY85-20MURTR-ND | Brand: Little Bird

Do you have a project that needs the ATTINY85-20MURTR-ND?We purchased these back in 2021 and then, never made anything with them.They have been kept in a dry cabinet ever since.The packet says it was 1000, we have pro...

SKU: SF-COM-25893 | Brand: SparkFun

This is a 5mm right angle light pipe to get the light of an LED out the end plate of an enclosure. We couldn't find a light pipe that fit all our needs, so we made it! This clip snaps over any SMD LED that is 1206 siz...

SKU: EF-EF05029 | Brand: ElecFreaks

The 8x16 dot matrix screen is a display screen that can show emoji expressions using an 8x16 dot matrix. Matrix PlanetX 8x16

SKU: EF-EF05010 | Brand: ElecFreaks

A green LED module from the ELECFREAKS PlanetX sensor range, designed for use with micro:bit and the Nezha expansion board. The RJ11 connector makes it simple to plug in — no soldering or breadboard required. Control...

SKU: EF-EF05011 | Brand: ElecFreaks

Four colors of red, yellow, blue, and green are available, which are able to light up and emit beautiful light, adjust the brightness, or flash under your control. In addition, you can also create installations by cr...

SKU: AF-6001 | Brand: Adafruit

The Adafruit Reversible USB Type A Plug Connector Breakout breaks out a reversible USB Type A plug to breadboard-friendly pins. The connector uses a thin centre contact so it can be plugged in either way — no more gue...

SKU: AF-5991 | Brand: Adafruit

The Adafruit USB Type C Power Delivery Dummy (I2C or Switchable) lets you tap into USB-C Power Delivery to get 5V, 9V, 12V, 15V, 18V, or 20V from any compatible USB-C charger or wall adapter — no soldering required. B...

SKU: SF-CAB-25597 | Brand: SparkFun

This is a jumper adapter cable that comes pre-terminated with a 6-pin JST-SH connector on one end and a breadboard hookup pigtail on the other. This cable was designed to allow users to easily breakout the pins from t...

SKU: AF-5920 | Brand: Adafruit

A 1-metre flexible LED strip with 480 green SMT LEDs per metre, soldered side-by-side in a "chip on board" configuration. Topped with a translucent silicone diffuser and encased in a sealed silicone tube, the result i...

SKU: AF-5921 | Brand: Adafruit

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these 'chip on board' ultra-flexible LED Strips with 480 SMT LEDs per meter, soldered side-by-side, and...

SKU: AF-5976 | Brand: Adafruit

The Adafruit DS2484 is a single-channel I2C-to-1-Wire bus adapter breakout with built-in ESD protection and split supply support. Simply connect it to an existing I2C bus and use the screw terminals to attach DS18B20 ...

SKU: AF-5972 | Brand: Adafruit

The Adafruit Switchable USB Type A to C Breakout Board lets you individually enable or disable each of the four USB wires (V+, D+, D−, GND) using an onboard 4-position DIP switch. This makes it a versatile tool for US...

SKU: AF-5929 | Brand: Adafruit

MAJOR KEY ALERT 🔑🔑🔑 we now stock 'Key Lock Switches'! These mechanical switches don't use a button, a lever, or a magnet to open and close the contacts. Instead, a literal key is used. This low-cost but effective key...

SKU: AF-5971 | Brand: Adafruit

The Adafruit Chainable DS18B20 Extender Breakout makes it easy to connect multiple DS18B20 temperature sensors in a daisy chain using standard STEMMA JST PH 2mm cables. Each breakout includes screw terminal blocks for...

SKU: AF-5956 | Brand: Adafruit

The Adafruit USB Host BFF adds a USB Host port to your QT Py or Xiao microcontroller, letting you connect keyboards, mice, USB drives, and other standard USB peripherals to your tiny project. It uses the MAX3421E USB ...