Components

SKU: SF-COM-25893 | Brand: SparkFun

This is a 5mm right angle light pipe to get the light of an LED out the end plate of an enclosure. We couldn't find a light pipe that fit all our needs, so we made it! This clip snaps over any SMD LED that is 1206 siz...

SKU: EF-EF05029 | Brand: ElecFreaks

The 8x16 dot matrix screen is a display screen that can show emoji expressions using an 8x16 dot matrix. Matrix PlanetX 8x16

SKU: EF-EF05010 | Brand: ElecFreaks

A green LED module from the ELECFREAKS PlanetX sensor range, designed for use with micro:bit and the Nezha expansion board. The RJ11 connector makes it simple to plug in — no soldering or breadboard required. Control...

SKU: EF-EF05011 | Brand: ElecFreaks

Four colors of red, yellow, blue, and green are available, which are able to light up and emit beautiful light, adjust the brightness, or flash under your control. In addition, you can also create installations by cr...

SKU: AF-6001 | Brand: Adafruit

The Adafruit Reversible USB Type A Plug Connector Breakout breaks out a reversible USB Type A plug to breadboard-friendly pins. The connector uses a thin centre contact so it can be plugged in either way — no more gue...

SKU: AF-5991 | Brand: Adafruit

The Adafruit USB Type C Power Delivery Dummy (I2C or Switchable) lets you tap into USB-C Power Delivery to get 5V, 9V, 12V, 15V, 18V, or 20V from any compatible USB-C charger or wall adapter — no soldering required. B...

SKU: SF-CAB-25597 | Brand: SparkFun

This is a jumper adapter cable that comes pre-terminated with a 6-pin JST-SH connector on one end and a breadboard hookup pigtail on the other. This cable was designed to allow users to easily breakout the pins from t...

SKU: AF-5920 | Brand: Adafruit

A 1-metre flexible LED strip with 480 green SMT LEDs per metre, soldered side-by-side in a "chip on board" configuration. Topped with a translucent silicone diffuser and encased in a sealed silicone tube, the result i...

SKU: AF-5921 | Brand: Adafruit

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these 'chip on board' ultra-flexible LED Strips with 480 SMT LEDs per meter, soldered side-by-side, and...

SKU: AF-5976 | Brand: Adafruit

The Adafruit DS2484 is a single-channel I2C-to-1-Wire bus adapter breakout with built-in ESD protection and split supply support. Simply connect it to an existing I2C bus and use the screw terminals to attach DS18B20 ...

SKU: AF-5972 | Brand: Adafruit

The Adafruit Switchable USB Type A to C Breakout Board lets you individually enable or disable each of the four USB wires (V+, D+, D−, GND) using an onboard 4-position DIP switch. This makes it a versatile tool for US...

SKU: AF-5929 | Brand: Adafruit

MAJOR KEY ALERT 🔑🔑🔑 we now stock 'Key Lock Switches'! These mechanical switches don't use a button, a lever, or a magnet to open and close the contacts. Instead, a literal key is used. This low-cost but effective key...

SKU: AF-5971 | Brand: Adafruit

The Adafruit Chainable DS18B20 Extender Breakout makes it easy to connect multiple DS18B20 temperature sensors in a daisy chain using standard STEMMA JST PH 2mm cables. Each breakout includes screw terminal blocks for...

SKU: AF-5956 | Brand: Adafruit

The Adafruit USB Host BFF adds a USB Host port to your QT Py or Xiao microcontroller, letting you connect keyboards, mice, USB drives, and other standard USB peripherals to your tiny project. It uses the MAX3421E USB ...

SKU: AF-5899 | Brand: Adafruit

The Adafruit ADG728 is a solid-state 1-to-8 analog matrix switch controlled over I2C. Unlike relays, analog switches have no moving parts, won't wear out, and switch in approximately 100 ns. Use it to route up to 8 an...

SKU: LB-LS5772-P | Brand: Little Bird

A harmonious blend of traditional charm and modern technology designed to illuminate your spaces with a warm, flickering glow reminiscent of real candlelight. Meticulously crafted to capture the essence of classic Edi...

SKU: AF-5865 | Brand: Adafruit

Introducing nOOds - the most fun and flexible LED filament on the market! This 24V, 1.2m long noodle is the perfect addition to your lighting collection, adding a touch of vibrant lime green to any space. Inspired by ...

SKU: AF-5866 | Brand: Adafruit

Add some noodle-y neon bling to your lighting collection with our nOOds - Flexible LED Filament! These 1.2m long filaments come in a vibrant blue color and are perfect for creating fun and unique lighting effects. Mad...

SKU: AF-5867 | Brand: Adafruit

nOOds are flexible LED filaments made with ultra-flexible metal backing and coated in coloured silicone. Dozens of micro LED diodes are bonded together along the strip, producing a warm, even glow. The flexible design...

SKU: AF-5851 | Brand: Adafruit

This ultra-flexible LED strip packs 320 natural white SMT LEDs per metre into a slim 5 mm wide silicone-encased profile. The densely packed LEDs produce a smooth, continuous glow that resembles neon tubing — without e...