Components

SKU: SF-COM-09609 | Brand: SparkFun

This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", however they are incredibly thin making breadboard use not recommended. The swi...

SKU: LB-TOUCAN | Brand: Little Bird

The Little Bird Toucan is an smart RGB LED HAT designed for the Raspberry Pi!Based on the APA102, the Toucan packs 8 super-bright LEDs.Each of the LEDs are dimmable, and individually controllable (Raspberry Pi Rain...

SKU: LB-JST-10 | Brand: Little Bird

A 10-pack of JST-PH 2-pin SMT right-angle connectors. This is the standard connector used on single-cell LiPo and Li-Ion batteries, making it essential for any battery-powered project. The right-angle orientation and ...

SKU: LB-50K | Brand: Little Bird

This 50KΩ single-turn potentiometer provides smooth linear (Type B) resistance adjustment, making it ideal for volume controls, brightness adjustments, and analogue input on Arduino and other microcontroller projects....

SKU: LB-LR0549 | Brand: Little Bird

Description:620pcs Wire Jumper Pin Header Connector Housing Kit For Dupont and Crimp PinsSpecification: Brand:Excellway Model:TC10 Colors: Black,Silver Box Size: about 17.4x9.9x2.3cm(6.85x3.89x0...

SKU: AF-1536 | Brand: Adafruit

A breadboard-friendly active buzzer module that produces a loud 2 kHz tone when you apply 3–5V. Unlike a passive piezo element, this buzzer has built-in driver circuitry — no oscillating signal needed, just apply powe...

SKU: SF-COM-09181 | Brand: SparkFun

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...

SKU: SF-COM-11508 | Brand: SparkFun

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-fri...

SKU: LB-PT91059-G | Brand: Little Bird

A flexible green LED filament strip that bends and shapes easily for creative lighting effects. Operating at just 3 V and 20 mA, it's simple to power from batteries or low-voltage supplies. The 360° beam angle provide...

SKU: LB-LS3450 | Brand: Little Bird

A KCD4 panel-mount rocker switch with ON/OFF two-position operation and four-pin DPST (double pole, single throw) configuration. Rated for 16 A at 250 V AC, it is suitable for power switching in equipment, appliances,...

SKU: LB-EAGLED-LED-G | Brand: Little Bird

EagLED LEDs were made for e-textiles! This is a simple pack of green wearable leds that are still attached to one another. Simply snap the LEDs apart at your leisure to sew into clothing or whatever else you can...

SKU: AF-1185 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, how...

SKU: LB-ETEXTILELED-R | Brand: Little Bird

This is a simple single unit RED E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB tha...

SKU: SF-PRT-10007 | Brand: SparkFun

A set of stackable headers designed for the Arduino Uno, Arduino Pro, and other boards using the classic (pre-R3) pin layout. These female headers sit tall enough to clear the USB-B connector, making them ideal for st...

SKU: LB-BK-356 | Brand: Little Bird

A 10-pack of 10 kΩ trim potentiometers, perfect for breadboarding and prototyping. They feature a long, grippy adjustment knob and 0.1″ pin spacing that plugs directly into breadboards or perfboards with ease. Specif...

SKU: SF-PRT-13925 | Brand: SparkFun

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield boa...

SKU: LB-LS1374 | Brand: Little Bird

WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series).These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as s...

SKU: LB-LS0317-330 | Brand: Little Bird

These are your run-of-the-mill 1/4 Watt  5-band resistors. Commonly used in breadboards and other prototyping applications, these 330 ohm resistors make excellent LED current limiters and are great for general...

SKU: LB-LR0001 | Brand: Little Bird

This convenient little module allows you to control both the X-axis and Y-axis using two 10k potentiometers.  Also featured is an additional pushbutton switch providing another optional input for your project....

SKU: LB-20LED | Brand: Little Bird

A mixed pack of 20 standard 5 mm through-hole LEDs in five colours — a handy starter set for prototyping, paper circuits, and small projects where you need a variety of indicator colours on hand. Key Features 20 LE...