Components

SKU: DF-DFR0123 | Brand: DFRobot

This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, th...

SKU: SF-COM-12645 | Brand: SparkFun

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.Features: 600-610nm Orange 1.8-2.2VDC Forward Voltage 20mA Forward Current 40 degree viewing angle 10...

SKU: LB-PT91059-300-R | Brand: Little Bird

These red flexible LED filament bulbs are perfect for creating unique lighting effects. With a length of 300mm, they provide plenty of light while still being easy to manoeuvre. These bulbs operate on 3 volts, maki...

SKU: EC-CIN3232RT | Brand: Elecrow

This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....

SKU: AF-4209 | Brand: Adafruit

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead ...

SKU: AF-3814 | Brand: Adafruit

For a really long time we assumed that the JST PH didn't have a free-hanging male header version. But then we found this JST-PH 2-pin Male Cable, and we were like, this is perfect! It's not a genuine JST...

SKU: LB-LR0249 | Brand: Little Bird

Note: These breadboards have a badly laid out silkscreen. They work perfectly well as breadboards, but do not rely on the printed reference markers. An 830-point solderless breadboard (MB-102) at a discounted price...

SKU: SF-COM-09939 | Brand: SparkFun

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies f...

SKU: LB-LS1372 | Brand: Little Bird

WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series).These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as s...

SKU: LB-EAGLED-LED-R | Brand: Little Bird

Made here in Sydney these are our very own EagLED LED - Red in a pack of 10 These are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or use in Paper Circuits. T...

SKU: SF-COM-10969 | Brand: SparkFun

Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you’re gonna have the res...

SKU: SF-PRT-12795 | Brand: SparkFun

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a mal...

SKU: SF-COM-09609 | Brand: SparkFun

This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", however they are incredibly thin making breadboard use not recommended. The swi...

SKU: LB-TOUCAN | Brand: Little Bird

The Little Bird Toucan is an smart RGB LED HAT designed for the Raspberry Pi!Based on the APA102, the Toucan packs 8 super-bright LEDs.Each of the LEDs are dimmable, and individually controllable (Raspberry Pi Rain...

SKU: LB-JST-10 | Brand: Little Bird

A 10-pack of JST-PH 2-pin SMT right-angle connectors. This is the standard connector used on single-cell LiPo and Li-Ion batteries, making it essential for any battery-powered project. The right-angle orientation and ...

SKU: LB-50K | Brand: Little Bird

This 50KΩ single-turn potentiometer provides smooth linear (Type B) resistance adjustment, making it ideal for volume controls, brightness adjustments, and analogue input on Arduino and other microcontroller projects....

SKU: SF-PRT-14490 | Brand: SparkFun

Standard 330 Ω through-hole resistors rated at ¼ W with ±5% tolerance. These thick-lead versions fit securely into breadboards with minimal movement, making them reliable for prototyping. 330 Ω resistors are commonly...

SKU: LB-LR0549 | Brand: Little Bird

Description:620pcs Wire Jumper Pin Header Connector Housing Kit For Dupont and Crimp PinsSpecification: Brand:Excellway Model:TC10 Colors: Black,Silver Box Size: about 17.4x9.9x2.3cm(6.85x3.89x0...

SKU: AF-1536 | Brand: Adafruit

A breadboard-friendly active buzzer module that produces a loud 2 kHz tone when you apply 3–5V. Unlike a passive piezo element, this buzzer has built-in driver circuitry — no oscillating signal needed, just apply powe...

SKU: SF-COM-09181 | Brand: SparkFun

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...