Components

SKU: AF-5382 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-5351 | Brand: Adafruit

Adding LEDs to anything makes it 5x better -- it's a scientific fact! But when you have LEDs, you've got wires and power supplies and all that stuff is kinda annoying. What if you could have LEDs that light up without...

SKU: AF-5360 | Brand: Adafruit

A magnetic pogo pin connector set with three 0.1" (2.54mm) spaced contact pins in a right-angle configuration. The two halves snap together via embedded magnets, ensuring all three pogo pins make reliable contact. If ...

SKU: DF-FIT0666 | Brand: DFRobot

The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass white nylon columns, for a total of 260 pieces. The M2-size screw set is suitable for motherboards, sensors or...

SKU: DF-FIT0852 | Brand: DFRobot

This DIN Rail RJ45 Terminal Block Adapter-Horizontal, perfect for simplifying complex wiring, consists of an RJ45 Ethernet jack and an eight-port terminal. You can connect an RJ45 Ethernet to PCB which can be DIN rai...

SKU: DF-DFR0785 | Brand: DFRobot

A pack of five LED-illuminated push buttons in the DFRobot Gravity format. Each button lights up a different colour (red, yellow, green, blue, and white) when pressed, providing clear visual feedback. The digital outp...

SKU: AF-4423 | Brand: Adafruit

Totaling 560 pieces, this JST-XH Connector Kit is a must-have for your workstation. You'll have enough sockets and headers to fuel your maker tendencies for days on end!These connectors are really ...

SKU: AF-5135 | Brand: Adafruit

Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This mak...

SKU: AF-4437 | Brand: Adafruit

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect a 2x20 IDC cable to this very PCB, which ca...

SKU: AF-5087 | Brand: Adafruit

A matching pair of 3-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: AF-5131 | Brand: Adafruit

A comprehensive 800-piece wire ferrule kit for creating clean, reliable connections with stranded wire. Wire ferrules are tinned copper sleeves that, once crimped onto stranded wire, hold all the individual strands ne...

SKU: AF-4991 | Brand: Adafruit

The Adafruit I2C QT Rotary Encoder Breakout takes the hassle out of working with rotary encoders. An onboard microcontroller running Adafruit's seesaw firmware handles all the pulse tracking, debouncing, and pin manag...

SKU: SF-COM-18355 | Brand: SparkFun

The SparkFun Qwiic EEPROM Breakout is a simple and cost effective option to add some extra storage space to any project. With 512 kilo-bits (or 64 kilo-bytes) of storage, this product is great for any microcontroller ...

SKU: DF-TEL0140-1 | Brand: DFRobot

This Gravity wireless switch kit provides simple 433 MHz RF communication between a transmitter and receiver module. Based on digital signal transmission, it offers strong wall penetration, ultra-low standby power con...

SKU: AF-4956 | Brand: Adafruit

Get ready to clacky to your heart's content. Here is a 10 pack of translucent keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto a Cherry MX or compatible switch to turn your ...

SKU: AF-4930 | Brand: Adafruit

This 1.25 mm pitch 10-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal w...

SKU: AF-4728 | Brand: Adafruit

A replacement CSI/DSI flex connector for the Raspberry Pi. If the camera or display connector on your Pi has been damaged — snapped arms, broken latch — this part lets you rework it rather than replacing the entire bo...

SKU: AF-4721 | Brand: Adafruit

This matching pair of 1.25 mm pitch 3-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set. At 40 cm long, these cables offer plenty of reach for inte...

SKU: AF-4732 | Brand: Adafruit

The 64×64 RGB LED Matrix with 3mm pitch features 4096 bright RGB LEDs in a 192×192mm panel. This high-density display offers a good balance between pixel density and panel size, suitable for indoor signage and video w...

SKU: AF-4718 | Brand: Adafruit

The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no p...