Components

SKU: AF-1212 | Brand: Adafruit

The Adafruit SMT Breakout PCB for 8-pin SOIC, TSSOP, or MSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates an 8-pin TSSOP/MSOP footprint while th...

SKU: LB-LR0335-O | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant orange when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow simil...

SKU: AF-1193 | Brand: Adafruit

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. T...

SKU: AF-4046 | Brand: Adafruit

This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with our JST 3-PH cables, for extending and connecting sensors or LEDs, and the wires are even...

SKU: AF-1321 | Brand: Adafruit

A standard alkaline 9V battery for powering portable electronics projects, kits, and prototypes. These batteries use alkaline (MnO2) chemistry with a voltage range of 9.6V (fresh) to 4.8V (depleted). At a 50mA dischar...

SKU: AF-3983 | Brand: Adafruit

Put your project in stealth mode with these super slim, super tiny, and silent Mini Soft Touch Push-button Switches. They're less 'clicky' than tactile switches, they have a rubbery elastomer that feels good to p...

SKU: EF-EF03420 | Brand: ElecFreaks

The Christmas Tree Rainbow LED is a festive, tree-shaped board featuring 6 individually addressable NeoPixel RGB LEDs. Designed for the BBC micro:bit, it connects with crocodile clips — no expansion board required — a...

SKU: PI-COM0002 | Brand: Pimoroni

This 2×20 pin female GPIO header with extended 11 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The extra-tall pins are perfect for stacking pHAT boards on top of each other while still leaving...

SKU: AF-1476 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired i...

SKU: AF-3488 | Brand: Adafruit

This 30mm translucent yellow arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with a ~1K resistor are embedded in the button body in a series configuration, drawing just 5mA fro...

SKU: TB-RR2558 | Brand: Little Bird

A pack of two 220Ω carbon film resistors rated at 1W continuous power. These through-hole axial resistors are suitable for general-purpose electronics projects requiring higher power handling than standard ¼W resistor...

SKU: LB-00339 | Brand: Little Bird

This is a 5-pin female header, with extra long legs  Pins are spaced by 0.1".    

SKU: LB-LR0022 | Brand: Little Bird

It's a push button!A push button with resistors and breadboard friendly layout.**Push Button Pinout:**- Signal (High when button pushed)- Positive- Ground**Specifications:**- 600mW MAX (50mA at 12v)

SKU: AF-1620 | Brand: Adafruit

Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your elec...

SKU: AF-1789 | Brand: Adafruit

This 1K potentiometer is a two-in-one, good in a breadboard or with a panel. Its a fairly standard linear taper 1K ohm potentiometer, with a grippy shaft. Its smooth and easy to turn, but not so loose that it will ...

SKU: AF-1792 | Brand: Adafruit

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...

SKU: AF-1863 | Brand: Adafruit

This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendl...

SKU: AF-1875 | Brand: Adafruit

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V de...

SKU: AF-2222 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi B+ with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3m...

SKU: AF-2187 | Brand: Adafruit

A custom-made 2×20 short female header designed for surface-mount (SMT) Raspberry Pi HAT designs. This header provides the slimmest possible profile when you need a low-clearance connection between your HAT and a Rasp...