Components

SKU: AF-1442 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in red LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired in...

SKU: AF-3873 | Brand: Adafruit

This 5V electromagnet provides 5kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it suitable for small contr...

SKU: AF-1769 | Brand: Adafruit

This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small elect...

SKU: AF-1222 | Brand: Adafruit

The Adafruit GEMMA V2 is a tiny, coin-sized wearable microcontroller board powered by an ATtiny85 processor. At just 28 mm in diameter, it's small enough to fit into any sewable or wearable project, and affordable eno...

SKU: SF-COM-08642 | Brand: SparkFun

This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the ...

SKU: DF-FIT0301 | Brand: DFRobot

 INTRODUCTIONThese are 7.8"(20cm) long jumper wires terminated as male to female. Use these to jumper from any female header on any board such as Arduino processor. Multiple jumpers can be connected next to one a...

SKU: DF-DFR0151 | Brand: DFRobot

The DS1307 Real Time Clock module developed by one of our designers: Waiman. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST). The included Lithium co...

SKU: AF-2940 | Brand: Adafruit

These two Short Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and tiny with a body height of just...

SKU: DF-FIT0322 | Brand: DFRobot

This package includes 17 species transistors in common use.It's convenient for you to make some small designs.You could find a suitable one for your type! A transistor is a semiconductor device used to amplify and sw...

SKU: SF-PRT-08022 | Brand: SparkFun

Standard 22 AWG solid Black hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SKU: SF-KIT-13698 | Brand: SparkFun

This is a kit that provides you with a basic assortment of capacitors to start or continue your electronics tinkering. No more looking under your desk to see if you can find a spare capacitor you might have dropped a ...

SKU: AF-368 | Brand: Adafruit

A simple adapter that converts a 2.1 mm DC barrel jack to screw terminals, making it easy to connect a DC power supply to boards or projects that lack a DC jack. The terminals are labelled with positive and negative p...

SKU: AF-400 | Brand: Adafruit

Breakaway header is like the duct tape of electronics, and this header is one better with extra long pins on both sides. This makes it great for connecting things together that have two sockets - especially sold...

SKU: SF-PRT-10651 | Brand: SparkFun

These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which...

SKU: PL-1930 | Brand: Pololu

A pack of 100 female crimp pins designed for use with 0.1" (2.54mm) pitch crimp connector housings. Crimp these pins onto 22–28 AWG wires and snap them into housings to create custom cables compatible with standard he...

SKU: AF-1979 | Brand: Adafruit

This extra-tall, extra-long 2x20 female stacking header lets you add multiple plates, breakouts and other boards to a Raspberry Pi with a 40-pin GPIO header.The female header section is made taller to help an attached...

SKU: AF-878 | Brand: Adafruit

The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in red makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so you...

SKU: SF-PRT-14493 | Brand: SparkFun

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make excellent pull-ups, pull-downs and current limite...

SKU: AF-5938 | Brand: Adafruit

A breakaway strip of 36 press-fit male pin headers at standard 2.54mm (0.1") pitch. These headers can be attached to PCBs without soldering — press them firmly into place using pliers for a friction-fit connection tha...

SKU: AF-5664 | Brand: Adafruit

Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to four same-address I2C devices with completely solderless wiring. Five JST SH...