Components

SKU: SF-COM-10924 | Brand: SparkFun

These are massive single pole - double throw (SPDT) sealed relays. This means that when current is applied to the coil it throws a simple changeover switch, terminating the connection from the NC contact to ground and...

SKU: AF-420 | Brand: Adafruit

A 16×32 RGB LED matrix panel with 512 individually controllable LEDs at 6 mm pitch. Two IDC connectors on the back (input and output) allow panels to be daisy-chained for larger displays. Driven at a 1:8 scan rate usi...

SKU: SF-BOB-13099 | Brand: SparkFun

The SparkFun Rotary Switch Potentiometer Breakout is a small board the allows you to add resistors to a 10-position rotary switch, turning it into a potentiometer with 10 discrete steps. Multiple applications requi...

SKU: AF-423 | Brand: Adafruit

Your friends probably tell you that you are "good with your hands," but now you can also be good with your feet! This foot switch is made of rubbery plastic, is plenty strong to put up with any amount of stomping, and...

SKU: TB-PP1912 | Brand: Little Bird

A 4-pin mini XLR male plug for in-line (cable) mounting. The metal-cased connector features solder tag termination and a black housing, suitable for audio equipment, lighting control, and other applications requiring ...

SKU: SF-PRT-13061 | Brand: SparkFun

This 6 position screw terminal block provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist, solder or any other...

SKU: SF-KIT-13053 | Brand: SparkFun

Holy Wattage, Batman! This Power Resistor Kit comes with 5 each of 5 different 10 Watt resistor values including 1, 2, 4, 8, and 16 Ohms. These resistors are capable of dissipating large amounts of power without damag...

SKU: AF-3260 | Brand: Adafruit

Need some big indicators? We are big fans of these huge diffused yellow LEDs. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to...

SKU: AF-442 | Brand: Adafruit

Always have the right SMT components at your hand with this awesome 0603 Resistor and Capacitor book set! This book has nice translucent pages filled with cut tape 0603 SMT components, sorted, labeled and ready to go....

SKU: SF-PRT-10853 | Brand: SparkFun

This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini. Pick up a few of these to break out all of those pesky pins. Integrating these connectors into your projects ma...

SKU: AF-454 | Brand: Adafruit

You will squeak with delight when you hold this adorable miniature LED 8x8 matrix. 0.8" square, it's got everything a big LED matrix has, but bite-sized! There are 16 pins on the side, 8 on each, with 0.1" spacing ...

SKU: AF-455 | Brand: Adafruit

A compact 8×8 red LED matrix (KWM-30881CVB) measuring 30.5 mm (1.2") per side. The ultra-bright red LEDs are arranged in a grid with 16 pins (8 per side) on standard 2.54 mm (0.1") pitch, allowing the display to plug ...

SKU: AF-458 | Brand: Adafruit

Make a scrolling sign, or a small video display with this 8x8 gridded bi-color LED matrix. Only 1.2" on a side, it is quite visible but not so large it wont plug into a breadboard! Every grid has two LEDs inside so...

SKU: AF-415 | Brand: Adafruit

EL tape is the flat, wide cousin of EL wire — same glowing effect but in a 1cm-wide strip format. The glowing surface is 1cm wide (plastic coating is about 1.5cm), with adhesive on the back for easy mounting. Covered ...

SKU: AF-475 | Brand: Adafruit

This 30mm translucent green arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no ...

SKU: PL-1969 | Brand: Pololu

These 2×13-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable 26-wire conn...

SKU: SF-PRT-10738 | Brand: SparkFun

These metal hex standoffs raise your development board or proto board off the work surface for protection and airflow. With a #4-40 thread, they fit most boards with standard mounting holes. Specifications Length: ...

SKU: SF-PRT-10739 | Brand: SparkFun

Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below. Note: These are sold as a...

SKU: SF-DEV-10618 | Brand: SparkFun

The SparkFun Power Driver Shield Kit lets you switch high-current loads directly from your Arduino using six RFP30N06LE N-channel MOSFETs. Connect a computer power supply or other DC source to drive motors, solenoids,...

SKU: AF-512 | Brand: Adafruit

A PSP/Xbox-style analog thumb joystick with a built-in press-to-select button, mounted on a breakout board designed for easy panel mounting. Unlike simple directional joysticks, this analog stick provides precise, pro...