Components

SKU: AF-3249 | Brand: Adafruit

Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing enables 8 concurrent DMA NeoPixel strands from a single Feather M0, with up to 250 pixels per strand (2,000 total) — all running...

SKU: AF-2861 | Brand: Adafruit

This 24-LED NeoPixel Ring features RGBW LEDs (red, green, blue, and warm white ~3000K) in a compact circular form factor with a 65.5 mm outer diameter. Each LED contains an integrated WS2812-style driver, so you only ...

SKU: AF-1910 | Brand: Adafruit

The Adafruit 14-Segment LED Alphanumeric Backpack is a standalone I2C LED driver board that makes it easy to add a 4-character alphanumeric display to any project. Powered by the HT16K33 chip, it handles all LED multi...

SKU: PR-PIM335 | Brand: Little Bird

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD! Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PW...

SKU: PR-PIM331 | Brand: Little Bird

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD!Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM...

SKU: TB-ZC4895 | Brand: Little Bird

A 74HC595 8-bit serial-in, serial/parallel-out shift register IC in a through-hole DIP-16 package. This tri-state output shift register accepts serial data (SPI) and outputs 8 digital bits in parallel, making it ideal...

SKU: DF-DFR0031-W | Brand: DFRobot

Piranha LED light module, and special sensors Arduino board and ambient light sensor extension combination, can be used in the interaction with the light works. When the LED light module connected to Arduino, the...

SKU: AF-959 | Brand: Adafruit

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright blue dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA and SCL)...

SKU: AF-1009 | Brand: Adafruit

A pack of 15 colourful round tactile button switches in five colours — blue, grey, yellow, green, and red (3 of each). Each momentary switch comes with a snap-on round plastic cap for a clean, colour-coded look. Desig...

SKU: AF-1047 | Brand: Adafruit

Make a scrolling sign, or a small video display with this 8x8 gridded blue LED matrix. Only 1.2" on a side, it is quite visible but not so large it wont plug into a breadboard! There are 16 pins on the side, 8 on e...

SKU: AF-1045 | Brand: Adafruit

This compact 8×8 yellow-green LED matrix packs 64 ultra-bright LEDs into a 1.2" square footprint. With 0.1"-spaced pins on each side, it plugs directly into a breadboard — one row per side — making it easy to prototyp...

SKU: AF-1056 | Brand: Adafruit

You have some frickin' sharks at your lair, and you're thinking "it would be really great if I could attach some lasers to them" and then you see these little laser diode modules: what great timing! These encapsulated...

SKU: AF-1055 | Brand: Adafruit

A sturdy adjustable mount for laser diode modules. The set-screw clamp holds the laser securely, while the tilt mechanism lets you aim the beam precisely. A flat mounting plate with two slotted holes makes it easy to ...

SKU: TB-ST0358 | Brand: Little Bird

A miniature DPDT toggle switch with a momentary-off-momentary (mom–off–mom) action. The toggle springs back to the centre-off position when released from either direction, making it suitable for joystick-style control...

SKU: AF-4121 | Brand: Adafruit

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of cool white LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmab...

SKU: AF-1003 | Brand: Adafruit

You'll find these handy 2-pin 0.1" spacing pig-tails to be quite helpful when wiring up your project. The connector end snaps cleanly into 0.1" spaced header (and fits neatly side by side on 0.1" spacing as well). ...

SKU: AF-4117 | Brand: Adafruit

A flexible LED strip encased in translucent silicone rubber that produces a smooth, neon-like glow in purple. Unlike traditional neon, it requires no special transformers or glass tubing — just connect 9–12 V DC and i...

SKU: PI-COM0510 | Brand: Pimoroni

The Lite-On LTP-305 LED matrices have quite a heritage! They were first developed in 1971 by Texas Instruments, but subsequently have been manufactured by Lite-On. They're available in two suitably retro colours ...

SKU: AF-1112 | Brand: Adafruit

Stack multiple plates, breakouts etc onto your Raspberry Pi with this custom-made extra-tall and extra-long 2x13 female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi...

SKU: SF-COM-15168 | Brand: SparkFun

Now, you can easily add an HID/controller to your project! The SparkFun Qwiic Joystick combines the convenience of the Qwiic connection system and an analog joystick that feels reminiscent of the thumbstick from a Pla...