Components

SKU: SF-COM-13382 | Brand: SparkFun

This rugged metal pushbutton is a compact panel-mount latching switch for clean on/off control in enclosures, dashboards, control panels and interactive projects. Its stainless steel body gives it a tough, professiona...

SKU: SF-COM-13405 | Brand: SparkFun

Add a clean, rugged control to your enclosure or panel with this 16mm metal momentary pushbutton. It uses an SPDT momentary switch action, so it changes circuit state only while the button is being pressed.The stainle...

SKU: SF-COM-13399 | Brand: SparkFun

Add a clean, heavy-duty control to your enclosure or custom panel with this 16mm metal momentary pushbutton. The stainless steel body gives it a rugged, professional feel, while the blue illuminated LED ring provides ...

SKU: SF-COM-13447 | Brand: SparkFun

Add a rugged, polished control to your panel or enclosure with this 16mm metal momentary pushbutton. The stainless steel body gives it a sturdy feel, while the illuminated yellow LED ring provides a clear visual indic...

SKU: SF-COM-13416 | Brand: SparkFun

This 16mm momentary metal pushbutton gives custom panels, enclosures and interactive projects a clean, rugged interface with a polished stainless steel finish.The switch is SPDT momentary, so it changes circuit state ...

SKU: SF-COM-30228 | Brand: SparkFun

This compact tactile pushbutton is a high-reliability surface-mount switch for tight user interfaces. Its 5.25mm square outline and 1.5mm low-profile actuator height make it suitable for small enclosures such as remot...

SKU: SF-COM-31074 | Brand: SparkFun

This green mushroom-head pushbutton gives you a dependable, easy-to-hit input for starting a machine, triggering a command, or making a highly visible “Go”, “Start”, or “Reset” control.It operates as a momentary switc...

SKU: SF-COM-31041 | Brand: SparkFun

This red mushroom-head pushbutton gives control panels a dependable, easy-to-hit input for temporary activation, reset functions and machine control interfaces. The oversized metal actuator is designed for emergency-s...

SKU: SF-COM-27909 | Brand: SparkFun

This compact module provides a USB to serial UART interface using the FT231X family, making it a straightforward way to add USB connectivity to UART-based projects.It supports full modem control and works as a USB to ...

SKU: SF-COM-30227 | Brand: SparkFun

The RV-1805-C3 is an ultra-low-power real-time clock module built for efficient, reliable timekeeping in battery-powered electronics. It integrates the crystal (XTAL) directly into a hermetically sealed ceramic packag...

SKU: SF-COM-17734 | Brand: SparkFun

This basic blue surface-mount LED is a compact 1206 component suited to indicators, status lights and small embedded electronics projects.It is the same blue LED used on SparkFun's RedBoard line of products and many m...

SKU: SF-COM-29761 | Brand: SparkFun

This compact CMOS regulator provides a fixed 3.3V single output for low-current electronics projects and embedded hardware. It is rated for up to 200mA output current and is intended for surface-mount designs.The regu...

SKU: SF-COM-30226 | Brand: SparkFun

The MIC5205 is an efficient fixed positive linear voltage regulator for providing a regulated 3.3V output at up to 150mA. It is designed for low-noise performance and low dropout operation, with typical dropout voltag...

SKU: SF-COM-27840 | Brand: SparkFun

The LM258P is an easy-to-use dual-channel operational amplifier for breadboard-friendly and through-hole electronics projects. It is suited to common op-amp circuits such as transducer amplifiers, DC gain blocks and g...

SKU: SF-PRT-21329 | Brand: SparkFun

This pluggable terminal block socket is made for secure, removable wire-to-board connections in power and I/O wiring. The 10-way layout uses a 3.5mm pitch, giving you a compact connector for multi-wire harnesses.Each ...

SKU: SF-CAB-23353 | Brand: SparkFun

This handy cable connects a six pin GHR-06V type locking connector to breadboard-friendly male pins, making it easier to prototype with compact modules.The 1.25mm pitch GHR-06V locking JST connector is commonly found ...

SKU: SF-CAB-17854 | Brand: SparkFun

Securely link compatible modules with this short adapter cable, fitted with a 4-pin locking JST-GHR connector on one end and a 6-pin locking JST-GHR connector on the other.Both connectors use a 1.25 mm pitch and are s...

SKU: SF-CAB-19289 | Brand: SparkFun

This simple adapter cable makes it easy to connect between 3-pin JST and 3-pin Molex connectors in your electronics project.It has a 3-pin Molex connector on one end and a 3-pin JST connector on the other, both with 0...

SKU: SF-CAB-29458 | Brand: SparkFun

This IDC ribbon cable is a handy interconnect for compact electronics projects that use a 2mm pitch, 2x3-pin layout. At 120mm long, it is suited to short board-to-board runs inside enclosures or between nearby modules...

SKU: SF-COM-24210 | Brand: SparkFun

The PIC16F1829-I/SS is a compact 8-bit PIC microcontroller with Flash program memory, EEPROM and RAM onboard. It is suited to embedded control projects that need a small surface-mount MCU with common serial interfaces...