Components

SKU: LB-LR0249 | Brand: Little Bird

Note: These breadboards have a badly laid out silkscreen. They work perfectly well as breadboards, but do not rely on the printed reference markers. An 830-point solderless breadboard (MB-102) at a discounted price...

SKU: SF-COM-09939 | Brand: SparkFun

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies f...

SKU: LB-LS1372 | Brand: Little Bird

WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series).These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as s...

SKU: LB-EAGLED-LED-R | Brand: Little Bird

Made here in Sydney these are our very own EagLED LED - Red in a pack of 10 These are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or use in Paper Circuits. T...

SKU: SF-COM-10969 | Brand: SparkFun

Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you’re gonna have the res...

SKU: SF-PRT-12795 | Brand: SparkFun

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a mal...

SKU: SF-COM-09609 | Brand: SparkFun

This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", however they are incredibly thin making breadboard use not recommended. The swi...

SKU: LB-TOUCAN | Brand: Little Bird

The Little Bird Toucan is an smart RGB LED HAT designed for the Raspberry Pi!Based on the APA102, the Toucan packs 8 super-bright LEDs.Each of the LEDs are dimmable, and individually controllable (Raspberry Pi Rain...

SKU: LB-JST-10 | Brand: Little Bird

A 10-pack of JST-PH 2-pin SMT right-angle connectors. This is the standard connector used on single-cell LiPo and Li-Ion batteries, making it essential for any battery-powered project. The right-angle orientation and ...

SKU: LB-50K | Brand: Little Bird

This 50KΩ single-turn potentiometer provides smooth linear (Type B) resistance adjustment, making it ideal for volume controls, brightness adjustments, and analogue input on Arduino and other microcontroller projects....

SKU: SF-PRT-14490 | Brand: SparkFun

Standard 330 Ω through-hole resistors rated at ¼ W with ±5% tolerance. These thick-lead versions fit securely into breadboards with minimal movement, making them reliable for prototyping. 330 Ω resistors are commonly...

SKU: LB-LR0549 | Brand: Little Bird

Description:620pcs Wire Jumper Pin Header Connector Housing Kit For Dupont and Crimp PinsSpecification: Brand:Excellway Model:TC10 Colors: Black,Silver Box Size: about 17.4x9.9x2.3cm(6.85x3.89x0...

SKU: AF-1536 | Brand: Adafruit

A breadboard-friendly active buzzer module that produces a loud 2 kHz tone when you apply 3–5V. Unlike a passive piezo element, this buzzer has built-in driver circuitry — no oscillating signal needed, just apply powe...

SKU: SF-COM-09181 | Brand: SparkFun

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...

SKU: LB-PT91059-G | Brand: Little Bird

A flexible green LED filament strip that bends and shapes easily for creative lighting effects. Operating at just 3 V and 20 mA, it's simple to power from batteries or low-voltage supplies. The 360° beam angle provide...

SKU: LB-LS3450 | Brand: Little Bird

A KCD4 panel-mount rocker switch with ON/OFF two-position operation and four-pin DPST (double pole, single throw) configuration. Rated for 16 A at 250 V AC, it is suitable for power switching in equipment, appliances,...

SKU: LB-EAGLED-LED-G | Brand: Little Bird

EagLED LEDs were made for e-textiles! This is a simple pack of green wearable leds that are still attached to one another. Simply snap the LEDs apart at your leisure to sew into clothing or whatever else you can...

SKU: AF-4255 | Brand: Adafruit

Brass heat-set inserts provide strong, reusable threaded connections in 3D-printed and injection-moulded plastic parts. Each insert has a knurled outer surface that grips the surrounding plastic when pressed in with a...

SKU: AF-3955 | Brand: Adafruit

This 200 mm cable converts a JST PH 4-pin connector into four individual wires with 0.1″ (2.54 mm) male header pins on the end. It's designed for connecting STEMMA and Grove I²C boards to breadboards, socket headers, ...

SKU: AF-1185 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, how...