Components

SKU: SF-COM-08285 | Brand: SparkFun

A pack of super bright green LEDs in the standard 5 mm (T1¾) package with clear lenses. At 12,000 mcd, these LEDs deliver exceptional brightness suitable for indicators, lighting effects, and high-visibility projects....

SKU: SF-COM-00107 | Brand: SparkFun

This is the basic L7805 voltage regulator, a three-terminal positive regulator with a 5V fixed output voltage. This fixed regulator provides a local regulation, internal current limiting, thermal shut-down control,...

SKU: AF-659 | Brand: Adafruit

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tut...

SKU: SF-COM-09590 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and...

SKU: SF-PRT-14492 | Brand: SparkFun

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make excellent pull-ups, pull-downs and current limiters....

SKU: DF-FIT0110 | Brand: DFRobot

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel ...

SKU: SF-COM-09190 | Brand: SparkFun

This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it ‘clicks’ really well). This button is great for user input on a PCB or a good, big reset button o...

SKU: SF-DEV-08776 | Brand: SparkFun

We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).LilyPad is a wearable e-textile technology develo...

SKU: SF-PRT-12047 | Brand: SparkFun

This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jumper...

SKU: SF-PRT-12046 | Brand: SparkFun

This green Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jumper...

SKU: AF-2831 | Brand: Adafruit

This Photo Transistor Light Sensor is a simple sensor that detects ambient light. It's kind of the opposite of an LED - when light hits the little chip inside, it induces current to flow from the long pin...

SKU: SF-COM-00526 | Brand: SparkFun

The LD1117V33 is a low-dropout (LDO) positive voltage regulator with a fixed 3.3V output. With on-chip trimming providing ±1% output voltage tolerance and built-in current and thermal limiting, it's a reliable choice ...

SKU: AF-3002 | Brand: Adafruit

These two Short Male Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and tiny and are designed to match pe...

SKU: SF-SEN-10293 | Brand: SparkFun

A simple piezo element that can be used as both a sensor and a small audio transducer. When flexed or tapped, it generates a voltage that can be read by a microcontroller, making it ideal for knock and vibration detec...

SKU: DF-FIT0498 | Brand: DFRobot

This 12V normally closed solenoid valve controls water flow through a 1/2″ (DN15) inlet and outlet. It remains closed when unpowered and opens when 12V is applied — no polarity distinction is required. Pair it with a ...

SKU: AF-5585 | Brand: Adafruit

These Socket Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!These headers are particularly cute and tiny with a body height of just 5.0 mm they are the...

SKU: LB-LORI-RT | Brand: Little Bird

Description The Little Bird Lorikeet is an RGB LED strip 5 programmable LEDs. This Australian made board uses the WS2812B LED (better known as NeoPixels). This Raspberry Pi HAT has a chain-able design means you ca...

SKU: SF-ROB-15324 | Brand: SparkFun

Does controlling door and cabinet access with the power of Electromagnetism interest you? Excellent! In effect, this latch / lock solenoid is an electronic lock. When powered with 12VDC source, the latch is pulled in,...

SKU: SF-PRT-14491 | Brand: SparkFun

A pack of 20 through-hole 10 kΩ resistors with thick leads designed for a snug fit in solderless breadboards. These are standard ¼ W, ±5% tolerance PTH resistors — ideal for pull-ups, pull-downs, current limiting, and...

SKU: DF-FIT0117 | Brand: DFRobot

An assortment of 100 aluminium electrolytic capacitors across 12 common values, ranging from 1µF to 470µF. A handy kit for prototyping, decoupling, and general-purpose circuit building — covers the most frequently use...