Components

SKU: AF-285 | Brand: Adafruit

This weatherproof RGB LED flexi-strip features 30 LEDs per metre on a white PCB backing with a silicone weatherproof coating and 3M adhesive on the reverse. The entire strip is controlled as one unit — drive the R, G,...

SKU: AF-297 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these clear red LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add ...

SKU: PL-1077 | Brand: Pololu

This M3, pan-head screw is 25 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: SF-COM-11270 | Brand: SparkFun

This DC Blower really moves some air! Pulling about 1Amp @ 12VDC, this blower is rated at 16CFM (although it seems like more to us). We’ve used this blower to build small hovercrafts and to cool off on a hot day, they...

SKU: AF-3218 | Brand: Adafruit

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic red protective casing, and a red LED at the tip of the switch, this Red LED Toggle Switch is sure&nbs...

SKU: TB-RC5324 | Brand: Little Bird

A pack of 2 ceramic disc capacitors rated at 100pF and 50V DC. Ceramic capacitors are non-polarised, making them suitable for both AC and DC circuits. They're commonly used for decoupling, bypassing, and high-frequenc...

SKU: SF-PRT-10927 | Brand: SparkFun

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy loo...

SKU: SF-PRT-13054 | Brand: SparkFun

A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or c...

SKU: PL-1960 | Brand: Pololu

Steel zinc-plated pan-head Phillips machine screws, #4-40 thread, ¼" (6.35mm) long. Sold in a pack of 25. Ideal for securing PCBs, standoffs, and enclosures in electronics projects. Specifications Thread: #4-40 Le...

SKU: AF-518 | Brand: Adafruit

An ultra-bright 1 W cool white LED pre-mounted on an aluminium PCB heatsink, making it easy to solder and integrate into projects. With 90 lumens output in a 140° lambertian pattern, it delivers bright, even illuminat...

SKU: PL-1914 | Brand: Pololu

These 2×6-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable twelve-wire c...

SKU: SF-DEV-10524 | Brand: SparkFun

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to ...

SKU: AF-2926 | Brand: Adafruit

The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, wi...

SKU: PL-1910 | Brand: Pololu

These 2×2-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires or crimp pins to create reliable, removable...

SKU: SF-PRT-10371 | Brand: SparkFun

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers...

SKU: AF-616 | Brand: Adafruit

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter ...

SKU: TB-ZL3348 | Brand: Little Bird

The LM348 is a quad operational amplifier IC containing four independent 741-type op-amps in a single 14-pin DIP package. It's a versatile, general-purpose op-amp suitable for a wide range of analogue circuit applicat...

SKU: SF-COM-10001 | Brand: SparkFun

Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft. The knob slides onto the potentiometer and holds tightly with a strong frict...

SKU: TB-RG5010 | Brand: Little Bird

A 1 nF polyester (greencap) capacitor rated at 100 VDC. Polyester capacitors offer good stability and reliability across a wide range of applications, making them a versatile choice for general-purpose circuits, filte...

SKU: AF-812 | Brand: Adafruit

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal...