Components

SKU: AF-1484 | Brand: Adafruit

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 6mm pitch. The larger pitch provides good visibility at greater distances, making it suitable for signage and larger-scale displays. Pre-balanced white output...

SKU: AF-1489 | Brand: Adafruit

Slim tactile momentary switches — the standard input buttons for electronic projects. These are half the width of classic 6mm tactile switches, so they line up neatly on a breadboard when plugged into every other row....

SKU: SF-CAB-14574 | Brand: SparkFun

These 2-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use for t...

SKU: AF-1655 | Brand: Adafruit

Individual WS2812B-compatible 5050 RGB LEDs with an integrated driver chip — the same LED used in NeoPixel strips and pixels. Each 5 × 5 mm package contains an RGB LED and controller with ~18 mA constant-current drive...

SKU: AF-1540 | Brand: Adafruit

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. We go through these guys real fast, and thought that given how ...

SKU: AF-1675 | Brand: Adafruit

A 150mm IDC ribbon cable with 10-pin 2×5 socket connectors at 1.27mm (0.05") pitch on both ends. Designed for SWD (Serial Wire Debug) programming and debugging connections commonly found on ARM Cortex development boar...

SKU: AF-1721 | Brand: Adafruit

A 24-bar bi-colour (red/green) LED bargraph kit with an I²C backpack controller. The backpack handles all LED multiplexing and drive, letting you control 48 LEDs (24 bars × 2 colours) from just two I²C pins. Constant-...

SKU: AF-1767 | Brand: Adafruit

A low-sensitivity, non-directional vibration switch that acts as a simple motion detector. Inside, a stiff spring is coiled around a central metal pin — when the switch is shaken or moved with enough force, the spring...

SKU: AF-1793 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these 5mm clear UV / Purple LEDs. These emit UV 'blacklight' in the UVA spectrum so they are great for projects with fluorescent materials referred to as UV/blacklight-...

SKU: AF-1872 | Brand: Adafruit

This 8 MHz ceramic resonator is a breadboard-friendly oscillator with built-in load capacitors, making it a simple drop-in timing source for microcontrollers. With 0.5% accuracy, it's well suited for everyday electron...

SKU: AF-2225 | Brand: Adafruit

This is just a standard USB-A jack.  It's a sturdy metal with 4 pins in the back and 2 small mounting tabs that make it easy to use in your next USB projectWe use this USB-A jack for everything, really. With a li...

SKU: AF-2102 | Brand: Adafruit

This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre ...

SKU: DF-DFR0130-B | Brand: DFRobot

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...

SKU: DF-DFR0021-G | Brand: DFRobot

This green LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin i...

SKU: DF-DFR0021-B | Brand: DFRobot

This Blue LED light module has a shiny white color. It is ideal for Arduino starters. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal p...

SKU: DF-FIT0146 | Brand: DFRobot

An 8-pin female header with extra-long legs, designed for stacking Arduino shields. The extended pins pass through to the board below, allowing multiple shields to be stacked on a single Arduino. Pins are spaced at st...

SKU: SF-PRT-14417 | Brand: SparkFun

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system!Additionally, this connector w...

SKU: DF-FIT0182 | Brand: DFRobot

A 10-pack of M3 × 20mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking ...

SKU: DF-DFR0031-G | Brand: DFRobot

This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS...

SKU: SF-COM-09276 | Brand: SparkFun

This heavy-duty SPST toggle switch provides simple on/off control for power circuits and panel-mounted applications. Rated for 2 A at 250 V AC or 4 A at 125 V AC, it's suitable for both mains-voltage and low-voltage p...