Circuitry & IOT

SKU: DF-SEN0013 | Brand: DFRobot

This SHARP infrared distance sensor takes a continuous distance reading and returns a corresponding analog voltage with a range of 20cm (8") to 150cm (60").It can be usually applied as obstacle avoidance and path p...

SKU: SF-DEV-14134 | Brand: SparkFun

The Arduino Industrial 101 is a compact WiFi evaluation board based on the Arduino 101 LGA module. Combining an ATmega32U4 microcontroller with an Atheros AR9331 MIPS Linux processor, it provides a powerful platform f...

SKU: SF-PRT-08614 | Brand: SparkFun

This is a simple two wire cable. Both ends have a 2-pin 0.1" pitch female connector. Dimensions: 130mm length

SKU: SF-COM-08348 | Brand: SparkFun

The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light ...

SKU: PL-1034 | Brand: Pololu

The 0.100″ (2.54 mm) 3×4-Pin Straight Female Header is a triple-row, 12-pin socket strip designed to mate with standard 0.1″ pitch male headers. Its unusual three-row configuration provides a compact, high-density con...

SKU: PL-1969 | Brand: Pololu

These 2×13-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable 26-wire conn...

SKU: AF-3320 | Brand: Adafruit

The ESP-WROOM-32 is Espressif's flagship WiFi + Bluetooth Classic + BLE module, built around the dual-core Tensilica LX6 microprocessor. It targets a wide variety of applications from low-power sensor networks to dema...

SKU: SF-KIT-12963 | Brand: SparkFun

The SparkFun Digital Sandbox Add-On kit extends the Digital Sandbox (DS) learning platform with three additional circuit experiments. Build an electric musical instrument, control motor speed, and drive a servo — perf...

SKU: PL-1921 | Brand: Pololu

These 2×12-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable 24-wire conn...

SKU: PL-1920 | Brand: Pololu

These 1×16-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable multi-wire c...

SKU: PL-1915 | Brand: Pololu

These 2×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable fourteen-wire...

SKU: PL-1908 | Brand: Pololu

These 1×9-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable nine-wire con...

SKU: PL-1906 | Brand: Pololu

These 1×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable seven-wire co...

SKU: SF-PRT-12718 | Brand: SparkFun

PCB mount clip to hold a AAA battery. Sold in single units, you’ll need two for each battery. These work great for small, low power applications that need a battery to run. Low cost and easy to use!Documents:Datasheet

SKU: SF-SEN-12617 | Brand: SparkFun

Knowing where your robot is can be very important! The RedBot Wheel Encoder allows you to track the number of revolutions each wheel has made. This sensor works by detecting the movement of small teeth connected to a ...

SKU: PL-1756 | Brand: Pololu

These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1″ (2.54 mm) headers, connectors, and solderless breadboards. ...

SKU: DF-FIT0078 | Brand: DFRobot

A double-layer 6×AA battery holder with a stacked 3+3 cell arrangement for a more compact footprint. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Comes with 150mm (6"...

SKU: SF-PRT-09387 | Brand: SparkFun

A pack of 10 premium male-to-male jumper wires, 12" (30cm) long. Compatible with breadboards, Arduino headers, and any 0.1" (2.54mm) pitch prototyping board. Assorted colours for easy circuit identification. Specific...

SKU: SF-PRT-09388 | Brand: SparkFun

This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1...

SKU: PL-1023 | Brand: Pololu

A 2×3-pin (6-pin) female header with standard 0.1" (2.54mm) spacing. This compact dual-row header is commonly used for ISP programming connections, small sensor breakouts, and custom cable assemblies. The 2×3 configu...