Buttons & Switches

SKU: DF-DFR0785-W | Brand: DFRobot

This Gravity LED button is a simple illuminated push button with a transparent cap, designed for interactive Arduino and micro:bit projects. When the button is pressed, the internal white LED turns on to provide clear...

SKU: AF-3870 | Brand: Adafruit

A compact push-button toggle switch — press once to turn on, press again to turn off. Often called a "flashlight switch" due to its common use in small torches, this latching switch is ideal as a power switch or mode ...

SKU: AF-3064 | Brand: Adafruit

By popular request - we now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable comes with an in-line Switch - click once t...

SKU: AF-3395 | Brand: Adafruit

This Panel Mount Right Angle 10K Linear Potentiometer w/ On-Off Switch is a two-in-one, with both a breadboard-friendly potentiometer and a switch. For the potentiometer-half, you've got a standard linear taper 10K...

SKU: TB-ST0572 | Brand: Little Bird

DPDT panel mount toggle switch. Specifications Switch Type Toggle Poles / Contacts 2 pole ...

SKU: PL-1402 | Brand: Pololu

This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch or tactile bump sensor for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 m...

SKU: SF-COM-11138 | Brand: SparkFun

A compact round rocker switch for simple on/off power control. This SPST (single pole, single throw) switch is rated up to 10A at 125V AC and panel-mounts into a 20mm diameter hole. Key Features Type – SPST (on/off...

SKU: AF-3643 | Brand: Adafruit

A 2.1 mm DC barrel jack with a built-in rocker switch, giving you a simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it ...

SKU: TB-SP0602 | Brand: Little Bird

A compact SPST normally-open micro tactile pushbutton switch with a 3.5 mm actuator height. Single-action momentary operation — press to close, release to open. PCB-mount with a 6 × 6 mm footprint, ideal for through-h...

SKU: SF-COM-11477 | Brand: SparkFun

This inline switch is great when you just want a simple on/off toggle switch that’s already enclosed. Inside is a simple rocker switch with solder terminals with crimp strain relief. Attach some wires, solder them in ...

SKU: PI-COM0403 | Brand: Pimoroni

  Need the Datasheet?  12mm is Here. 6mm is Here. And the 3mm is Here.

SKU: LB-LR0347A | Brand: Little Bird

This E-Textiles  Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on ...

SKU: PR-PIM248 | Brand: Little Bird

Essential for control of your project, this range of variable resistors and switches are ideal for taking control. Maker Essentials are components and useful bits for everyday electronics and tech projects. Kit ...

SKU: PI-COM0421 | Brand: Pimoroni

A classic arcade-style pushbutton in white, perfect for adding a satisfying, tactile control to your projects. With a short 2mm travel distance, these buttons deliver the responsive feel of a real arcade cabinet. The...

SKU: AF-1392 | Brand: Adafruit

This single button keyfob remote goes with our three basic 315MHz RF receiver modules. It will work with all of them, sending out one command that matches with the second output on the receiver. Its small and light...

SKU: PL-2811 | Brand: Pololu

The Mini MOSFET Slide Switch is a compact, breadboard-compatible power switch module that uses a pair of P-channel MOSFETs to deliver continuous currents up to 4.3 A at 4.5–32 V. It features built-in reverse-voltage p...

SKU: AF-3430 | Brand: Adafruit

A 24 mm translucent red arcade button with built-in LEDs. The crystal-clear body glows when the LEDs are powered, making it ideal for illuminated control panels, arcade cabinets, and interactive projects. A pre-instal...

SKU: PL-1528 | Brand: Pololu

A compact SPDT snap-action switch (microswitch) with a 13.5mm lever arm. The satisfying tactile "click" provides clear feedback when activated, making it perfect for limit switches, bump sensors, and user interfaces. ...

SKU: AF-5876 | Brand: Adafruit

Looking to create your own custom keyboard? Look no further than these Kailh Black Linear mechanical key switches! These switches offer a smooth and satisfying linear keystroke, perfect for those who prefer a consiste...

SKU: AF-5157 | Brand: Adafruit

The Adafruit NeoKey 5×6 Ortho is a snap-apart PCB grid of 30 mechanical key switch sockets, each with a reverse-mount NeoPixel LED. Break the grid along its scored tabs to create any rectangular layout you need — 2×3,...