Buttons & Switches

SKU: DF-DFR0789 | Brand: DFRobot

This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little butt...

SKU: AF-5123 | Brand: Adafruit

The Kailh Blue mechanical key switch delivers a satisfying clicky, tactile keystroke with an audible click at the actuation point. Cherry MX-compatible, it's ideal for building custom keyboards, macro pads, and DIY in...

SKU: AF-5296 | Brand: Adafruit

The Adafruit LED Arcade Button 1×4 QT I2C Breakout lets you connect up to four illuminated arcade buttons to any microcontroller over I2C. A built-in seesaw microcontroller handles button press detection and LED PWM c...

SKU: DF-DFR0792 | Brand: DFRobot

This ADKey board with 10 keys can be used to drive your DFPlayer Pro, DFPlayer Mini, or Voice Recorder Module without programming or using various resistors. It offers 20 delicate button caps with ...

SKU: AF-4978 | Brand: Adafruit

The only thing better than a nice mechanical key, is one that also can glow any color of the rainbow - and that's what the Adafruit NeoKey Breakout will let you do! This little 0.75" x 0.85" PCB can fit one Cherry MX ...

SKU: AF-4660 | Brand: Adafruit

A rugged, chrome-plated latching pushbutton with a built-in RGB LED ring. Drill a 16 mm hole in any panel up to 6.35 mm (1/4") thick and mount it securely — an included rubber gasket provides a water-resistant seal fo...

SKU: SF-BOB-15932 | Brand: SparkFun

The SparkFun Qwiic Button simplifies adding a tactile button to your I2C project. It handles debouncing, pull-up resistors, and polling internally, so you can focus on your application. A built-in red LED provides vis...

SKU: EF-EF04034 | Brand: ElecFreaks

The Octopus Digital Push Button Brick is a simple momentary button module from ElecFreaks' Octopus series. It connects to Arduino, micro:bit, and other microcontroller boards via a 3-pin buckled connector — no breadbo...

SKU: EF-EF04033 | Brand: ElecFreaks

The Octopus Button Switch Brick is a simple, plug-and-play pushbutton module from the ElecFreaks Octopus Electronic Bricks series. It features a large button with a transparent cap — you can insert a custom label unde...

SKU: EF-EF04035 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: AF-1333 | Brand: Adafruit

This membrane keypad has a single key, but it does have an embedded surface-mount red LED installed. The flex cable is also extra-long, so we can think of a lot of wearable and portable projects that would use this so...

SKU: AF-915 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water ou...

SKU: AF-916 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water ou...

SKU: AF-4020 | Brand: Adafruit

Everything you need to get started with the NeoTrellis M4 in one kit. This pack bundles the NeoTrellis M4 Mainboard, an acrylic enclosure, silicone elastomer button pads, and rubber feet — ready to assemble into a com...

SKU: AF-3938 | Brand: Adafruit

The NeoTrellis M4 Mainboard combines an ATSAMD51 Cortex M4 processor, a 4×8 grid of NeoPixel-lit elastomer button pads, stereo audio output, microphone input, and a triple-axis accelerometer into one compact, programm...

SKU: AF-1611 | Brand: Adafruit

A soft, squishy 4×4 silicone elastomer keypad with 16 buttons, each designed to fit a 3mm LED for optional backlighting. The conductive pad on the bottom of each button closes a contact underneath when pressed, provid...

SKU: DF-FIT0115-B | Brand: DFRobot

A rugged, waterproof illuminated pushbutton designed for panel-mount applications. Built from stainless steel, this momentary switch features a blue LED ring that provides clear visual feedback, making it easy to iden...

SKU: DF-FIT0115-G | Brand: DFRobot

A waterproof stainless steel momentary pushbutton with a built-in green LED ring illuminator. Rated IP67 for dust-tight and water-resistant operation, this rugged button is ideal for panel-mount applications in both i...

SKU: DF-FIT0115-R | Brand: DFRobot

This is a water proof push button with illuminator (LED). It is made by stainless steel with excellent quality. It comes at red illuminated ring. SPECIFICATIONS Model:LAS1-AGQ 19 Diameter ...

SKU: SF-COM-09179 | Brand: SparkFun

A 33 mm round momentary pushbutton in arcade style with a convex green cap. Features a simple screw-in design for easy panel mounting — ideal for arcade builds, interactive projects, and control panels. Specification...