Buttons & Switches

SKU: PL-2808 | Brand: Pololu

A compact latching power switch with built-in reverse voltage protection. One push turns power on, another push turns it off – providing clean, reliable power control without bulky mechanical switches. This low-volta...

SKU: DF-DFR0785-B | Brand: DFRobot

This is a simple LED-illuminated switch button with a transparent cap. It’s just like a basic switch button, but it lights up color(red/ yellow/ green/ blue/ white) when pressed down, which gives you visual feedback. ...

SKU: AF-5020 | Brand: Adafruit

The Adafruit NeoKey Trinkey is a USB-A development board that combines an ATSAMD21 microcontroller, a Cherry MX-compatible key switch footprint, and an RGB NeoPixel LED into one tiny plug-in package. Insert it into an...

SKU: AF-5157 | Brand: Adafruit

The Adafruit NeoKey 5×6 Ortho is a snap-apart PCB grid of 30 mechanical key switch sockets, each with a reverse-mount NeoPixel LED. Break the grid along its scored tabs to create any rectangular layout you need — 2×3,...

SKU: AF-4979 | Brand: Adafruit

The NeoKey FeatherWing adds two mechanical key switch sockets with individually addressable NeoPixel backlighting to any Feather-format microcontroller. Each socket accepts Cherry MX or compatible switches (Kailh, Gat...

SKU: SF-BOB-15931 | Brand: SparkFun

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all of those ...

SKU: AF-4190 | Brand: Adafruit

We've got plenty of round and square buttons, but these LED Illuminated Triangle Pushbuttons are welcome to the party. These make us think of 1960's or 70's Sci-Fi control board buttons. As everyone knows, tri...

SKU: AF-1332 | Brand: Adafruit

Punch in your secret key into this numeric membrane keypad. This keypad has 4 buttons, and since every key has its own wire line, no matrix code is required - just treat these like every day switches. The membrane is ...

SKU: AF-1445 | Brand: Adafruit

A clean, rounded 16mm panel-mount momentary pushbutton in red. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. K...

SKU: AF-3424 | Brand: Adafruit

This chrome-plated rugged metal pushbutton features a built-in RGB LED ring light and a latching on/off mechanism. Press once to latch on, press again to release — unlike momentary buttons, it stays in position. Simpl...

SKU: AF-3433 | Brand: Adafruit

A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right in! That's right, you'll be button-mashing amidst a ...

SKU: DF-FIT0156 | Brand: DFRobot

A 40 mm red mushroom-head emergency stop push button switch. This momentary-action button fits a standard 22 mm mounting hole and is rated for up to 660V insulation voltage and 10 A thermal current — suitable for both...

SKU: SF-COM-08033 | Brand: SparkFun

This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the bu...

SKU: SF-COM-11971 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm thread...

SKU: SF-COM-07835 | Brand: SparkFun

A translucent silicone rubber button pad with 16 buttons in a 4×4 grid. Each button has a hole underneath that accepts a standard 3 mm or 5 mm LED, allowing you to backlight individual buttons with any colour — includ...

SKU: DF-DFR0075 | Brand: DFRobot

This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino. It can be used together with our I/O expansion boards to make amazing interactive project. SPECIFICATIONS ...

SKU: AF-492 | Brand: Adafruit

A button is a button, and a switch is a switch, but this LED illuminated arcade buttons is in a class of its own. Its the same size as a 'standard' 30mm arcade but has a built in LED that can be controlled separately ...

SKU: AF-5783 | Brand: Adafruit

The EYESPI Pi Beret is a slim HAT for Raspberry Pi that provides an EYESPI display connector, STEMMA QT port, buttons, and a slide switch — everything you need to add a colour TFT or E-Ink display and sensors to your ...

SKU: AF-4980 | Brand: Adafruit

The only thing better than a nice mechanical key is, perhaps, FOUR mechanical keys that also can glow any color of the rainbow - and that's what the Adafruit NeoKey 1x4 QT I2C Breakout will let you do! ...

SKU: AF-5307 | Brand: Adafruit

The Kailh Big Switch Series comes to Adafruit! These switches are 4 times bigger on each side than a normal MX switch. That comes up to 64 times bigger in volume.  Yet, these switches are fully functional. Use as...