Buttons & Switches

SKU: LB-LS1025 | Brand: Little Bird

The 2-Player DIY Arcade Joystick Kit includes everything you need to build your own retro arcade controls. With 20 LED arcade buttons, two joysticks (red and blue), two USB encoders, and all necessary cabling, this ki...

SKU: DF-DFR0785 | Brand: DFRobot

A pack of five LED-illuminated push buttons in the DFRobot Gravity format. Each button lights up a different colour (red, yellow, green, blue, and white) when pressed, providing clear visual feedback. The digital outp...

SKU: DF-DFR0785-B | Brand: DFRobot

This is a simple LED-illuminated switch button with a transparent cap. It’s just like a basic switch button, but it lights up color(red/ yellow/ green/ blue/ white) when pressed down, which gives you visual feedback. ...

SKU: SS-101020003 | Brand: Seeed Studio

A simple momentary push button module in the Grove form factor. When pressed it outputs a HIGH signal; when released it returns to LOW. The button includes a built-in pull-down resistor, so it's ready to use as a digi...

SKU: DF-DFR0789-B | Brand: DFRobot

This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little butt...

SKU: DF-DFR0789 | Brand: DFRobot

This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little butt...

SKU: EF-EF04034 | Brand: ElecFreaks

The Octopus Digital Push Button Brick is a simple momentary button module from ElecFreaks' Octopus series. It connects to Arduino, micro:bit, and other microcontroller boards via a 3-pin buckled connector — no breadbo...

SKU: EF-EF04033 | Brand: ElecFreaks

The Octopus Button Switch Brick is a simple, plug-and-play pushbutton module from the ElecFreaks Octopus Electronic Bricks series. It features a large button with a transparent cap — you can insert a custom label unde...

SKU: EF-EF04035 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: SF-COM-11813 | Brand: SparkFun

Have you ever been listening to music on your MP3 player and a song you don’t want to listen to comes on but you don’t want to reach into your bag to change the track? The 5 Button Fabric Button Pad, from Sensing Tex,...

SKU: DF-DFR0423 | Brand: DFRobot

INTRODUCTION This module is a self-locking switch. Press the button to turn it to the "on" state and press it again to turn it to the "off" state. The board has immersion gold plating and...

SKU: SF-PRT-26851 | Brand: SparkFun

Add five-way navigation input to an I2C project without building a button matrix from scratch. Press up, down, left, right or centre on the low-profile directional pad to send button input to your microcontroller.The ...

SKU: DF-DFR0785-W | Brand: DFRobot

This Gravity LED button is a simple illuminated push button with a transparent cap, designed for interactive Arduino and micro:bit projects. When the button is pressed, the internal white LED turns on to provide clear...

SKU: AF-3064 | Brand: Adafruit

By popular request - we now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable comes with an in-line Switch - click once t...

SKU: AF-5296 | Brand: Adafruit

The Adafruit LED Arcade Button 1×4 QT I2C Breakout lets you connect up to four illuminated arcade buttons to any microcontroller over I2C. A built-in seesaw microcontroller handles button press detection and LED PWM c...

SKU: M5-U025 | Brand: Little Bird

Description Dual Button, as its namesake, has two buttons with different color. If the Button unit is not enough, how about double it up to a pair. They share the exact same mechanism, button status can be detected...